Important compatibility info
| Number of mounting bores | 3 |
| Transmission Type | 7-Speed Dual-Clutch Transmission |
| Function | Flywheel |
| Clutch Type | for wet clutch |
| Extra Description | LuK DMF |
| Type | Flywheel |
Important compatibility info
Important compatibility info
| Additional Information | with control unit |
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
| Additionally required parts | Mounting Kit, motor-specific oil supply lines (feed/return) |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | Garrett Turbo REMAN |
| Manufacturer | Garrett |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Flywheel |
| Number of mounting bores | 6 |
| Transmission Type | Manual Transmission |
| Extra Description | LuK DMF |
| Type | Flywheel |
Important compatibility info
| Function | Flywheel |
| Number of mounting bores | 6 |
| Transmission Type | Manual Transmission |
| Extra Description | LuK DMF |
| Type | Flywheel |
Important compatibility info
| Additional Information | with oil supply line |
| Additional Information 2 | with mounting kit |
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | BorgWarner Turbo ProKit NEW |
| Manufacturer | BorgWarner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Charger, charging (supercharged/turbocharged) (186862)
- 1x Febi Mounting Kit, charger (191411)
- 1x Febi Oil Line, charger (189284)
Important compatibility info
| Extra Description | FULLPACK DMF (CSC) with High Efficiency Clutch |
| Weight | 18.37 kg |
| External diameter, clutch pressure plate | 241 mm |
| Type | Clutch Kit |
| Number of mounting bores | 6 |
| Function | Clutch Kit |
| Additional Information | with dual-mass flywheel, with central slave cylinder |
| Number of Teeth | 26 |
| Additional Information 2 | with screw set, with lock screw set |
| Tightening Torque | 60 Nm |
| Tightening angle | 90 ° |
Additional Information
- 1x Valeo Flywheel (836543)
- 1x Valeo Clutch Kit (832144)
- 1x Valeo Central Slave Cylinder, clutch (810123)
Important compatibility info
| Extra Description | FULLPACK DMF (CSC) with High Efficiency Clutch |
| Weight | 18.37 kg |
| External diameter, clutch pressure plate | 241 mm |
| Type | Clutch Kit |
| Number of mounting bores | 6 |
| Function | Clutch Kit |
| Additional Information | with dual-mass flywheel, with central slave cylinder |
| Number of Teeth | 26 |
| Additional Information 2 | with screw set, with lock screw set |
| Tightening Torque | 60 Nm |
| Tightening angle | 90 ° |
Additional Information
- 1x Valeo Flywheel (836543)
- 1x Valeo Clutch Kit (832144)
- 1x Valeo Central Slave Cylinder, clutch (810123)
Important compatibility info
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
| Additionally required parts | Mounting Kit |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | Garrett Turbo REMAN |
| Manufacturer | Garrett |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Includes fitting kit | FK80927A |
Important compatibility info
| Includes fitting kit | FK80927A |
Important compatibility info
| Brake Disc Thickness | 32 mm |
| Number of Holes | 5 |
| Centering Diameter | 67 mm |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Tightening Torque | 150 Nm |
| Machining | High-carbon |
| Placement on Vehicle | Front Axle |
| Outer diameter | 355 mm |
| Extra Description | PRIME LINE - Floating |
| Rotor Style | perforated/vented, two-piece brake disc, Aluminium Brake Disc Hub |
| Replaces | 09.A804.23 |
| Additional Information 2 | with bolts/screws |
| Height | 50 mm |
| Surface | Coated |
| Minimum thickness | 30 mm |
Additional Information
Brief Information
PVT vented disc. The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking.
Important compatibility info
| Brake Disc Thickness | 32 mm |
| Number of Holes | 5 |
| Centering Diameter | 67 mm |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Tightening Torque | 150 Nm |
| Machining | High-carbon |
| Placement on Vehicle | Front Axle |
| Outer diameter | 355 mm |
| Extra Description | PRIME LINE - Floating |
| Rotor Style | perforated/vented, two-piece brake disc, Aluminium Brake Disc Hub |
| Replaces | 09.A804.23 |
| Additional Information 2 | with bolts/screws |
| Height | 50 mm |
| Surface | Coated |
| Minimum thickness | 30 mm |
Additional Information
Brief Information
PVT vented disc. The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking.
Important compatibility info
| Extra Description | Approved |
| To be used with part number(s) | FK91101 |
| Inspection Tag | E57-103R |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Product met | Euro 3 |
| Material | Ceramic |
Important compatibility info
| Extra Description | Approved |
| To be used with part number(s) | FK91101 |
| Inspection Tag | E57-103R |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Product met | Euro 3 |
| Material | Ceramic |
Important compatibility info
| Function | Flywheel |
| Number of mounting bores | 8 |
| Transmission Type | Manual Transmission |
| Additional Information | with pilot bearing |
| Extra Description | LuK DMF |
| Type | Flywheel |
Important compatibility info
| Function | Flywheel |
| Number of mounting bores | 8 |
| Transmission Type | Manual Transmission |
| Additional Information | with pilot bearing |
| Extra Description | LuK DMF |
| Type | Flywheel |
Important compatibility info
| Charge Type | Charger/Charge Air Cooler |
| Type | Charger, charging (supercharged/turbocharged) |
| Manufacturer Restriction | BorgWarner |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | TurboFit |
Important compatibility info
| Type | Fuel Pump |
| Function | Fuel Pump |
Important compatibility info
| Type | Fuel Pump |
| Function | Fuel Pump |
Important compatibility info
| Operating Mode | Electric |
| Function | Fuel Pump |
| Pressure | 4 bar |
| Type | Fuel Pump |
Important compatibility info
| Operating Mode | Electric |
| Function | Fuel Pump |
| Pressure | 4 bar |
| Type | Fuel Pump |
Important compatibility info
Important compatibility info
| Operating Mode | Vacuum-controlled |
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
| Additionally required parts | Mounting Kit |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | Garrett Turbo NEW |
| Manufacturer | Garrett |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Net weight | 0.288 kg |
| Type | Nozzle and Holder Assembly |
| Manufacturer Restriction | Bosch |
| Function | Nozzle and Holder Assembly |
Important compatibility info
| Net weight | 0.288 kg |
| Type | Nozzle and Holder Assembly |
| Manufacturer Restriction | Bosch |
| Function | Nozzle and Holder Assembly |
Important compatibility info
| Operating Mode | Electric |
| Function | Fuel Pump |
| Type | Fuel Pump |
Important compatibility info
| Operating Mode | Electric |
| Function | Fuel Pump |
| Type | Fuel Pump |
Important compatibility info
| for OE number | 51.06630.0140 |
| Outer diameter | 270 mm |
| Thickness | 160 mm |
| Operating Mode | Electric |
| Type | Clutch, radiator fan |
| Function | Clutch, radiator fan |
| Hole Spacing | 214 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 51.06630.0140 |
| Outer diameter | 270 mm |
| Thickness | 160 mm |
| Operating Mode | Electric |
| Type | Clutch, radiator fan |
| Function | Clutch, radiator fan |
| Hole Spacing | 214 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Weight | 3800 g |
| Operating Mode | electronically controlled |
| Replaces | DCRP301220 |
| Suitable for vehicle type | CV (commercial vehicles) |
| Function | High-pressure Pump |
| Type | High-pressure Pump |
| Gross Weight | 4000 g |
| for OE number | 16700-5X01B |
| Quality | OE specification |
| Manufacturer Restriction | NISSAN |
| Version | HP3 |
Important compatibility info
| Weight | 3800 g |
| Operating Mode | electronically controlled |
| Replaces | DCRP301220 |
| Suitable for vehicle type | CV (commercial vehicles) |
| Function | High-pressure Pump |
| Type | High-pressure Pump |
| Gross Weight | 4000 g |
| for OE number | 16700-5X01B |
| Quality | OE specification |
| Manufacturer Restriction | NISSAN |
| Version | HP3 |
Important compatibility info
Important compatibility info
| Function | Fuel Pump |
| Operating Mode | Electric |
| Type | Fuel Pump |
Important compatibility info
| Function | Fuel Pump |
| Operating Mode | Electric |
| Type | Fuel Pump |
Important compatibility info
| Type | Soot/Particulate Filter, exhaust system |
| Function | Soot/Particulate Filter, exhaust system |
| Labels & Certifications | Euro 6 |
Additional Information
Important compatibility info
| Type | Soot/Particulate Filter, exhaust system |
| Function | Soot/Particulate Filter, exhaust system |
| Labels & Certifications | Euro 6 |
Additional Information
Important compatibility info
| Additional Information | with central slave cylinder |
| Additional Information 2 | with flywheel, with screw set |
| Number of mounting bores | 8 |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Extra Description | LuK RepSet DMF |
Additional Information
- 1x LuK Screw Set, flywheel (411026610)
- 1x LuK Flywheel (415056410)
- 1x LuK Clutch Kit (624353933)
Important compatibility info
| Additional Information | with central slave cylinder |
| Additional Information 2 | with flywheel, with screw set |
| Number of mounting bores | 8 |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Extra Description | LuK RepSet DMF |
Additional Information
- 1x LuK Screw Set, flywheel (411026610)
- 1x LuK Flywheel (415056410)
- 1x LuK Clutch Kit (624353933)
Important compatibility info
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
| Additionally required parts | Mounting Kit |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | Garrett Turbo REMAN |
| Manufacturer | Garrett |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 12 |
| Rated Power | 2.5 kW |
| Number of mounting bores | 2 |
| Type | Starter |
| Manufacturer Restriction | Mitsubishi |
| Function | Starter |
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 12 |
| Rated Power | 2.5 kW |
| Number of mounting bores | 2 |
| Type | Starter |
| Manufacturer Restriction | Mitsubishi |
| Function | Starter |
Important compatibility info
| Outer diameter | 228 mm |
| Additional Information 2 | with bolts/screws, with flywheel |
| Number of Teeth | 14 |
| Multi-piece | Four-piece |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Additional Information | with central slave cylinder, with synthetic grease, with dual-mass flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Screw Set, flywheel (ADW1930128)
- 1x Blue Print Clutch Kit (ADW193046)
- 1x Blue Print Flywheel (ADW193501)
- 1x Blue Print Central Slave Cylinder, clutch (ADW193604)
Important compatibility info
| Outer diameter | 228 mm |
| Additional Information 2 | with bolts/screws, with flywheel |
| Number of Teeth | 14 |
| Multi-piece | Four-piece |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Additional Information | with central slave cylinder, with synthetic grease, with dual-mass flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Screw Set, flywheel (ADW1930128)
- 1x Blue Print Clutch Kit (ADW193046)
- 1x Blue Print Flywheel (ADW193501)
- 1x Blue Print Central Slave Cylinder, clutch (ADW193604)
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Bottom eye, Top yoke |
| Type | Shock Absorber |
| Function | Shock Absorber |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Bottom eye, Top yoke |
| Type | Shock Absorber |
| Function | Shock Absorber |
Important compatibility info
| Function | Ignition Cable Kit |
| Ignition Cable | Connector Type SAE, Resistive Ignition Cable |
| for pipe diameter | 7 mm |
| Distributor/ Rotor | Connector Type DIN |
| Ignition Coil | Connector Type DIN |
| Length 2 | 630 mm |
| Cable Length | 275 mm. 385 mm. 515 mm. 525 mm. 630 mm. 635 mm. 680 mm. 790 mm |
| Quantity | 10 |
| Length 1 | 425 mm |
| Net weight | 0.756 kg |
| Type | Ignition Cable Kit |
| Extra Description | Lucas Premium Blade |
Important compatibility info
| Function | Ignition Cable Kit |
| Ignition Cable | Connector Type SAE, Resistive Ignition Cable |
| for pipe diameter | 7 mm |
| Distributor/ Rotor | Connector Type DIN |
| Ignition Coil | Connector Type DIN |
| Length 2 | 630 mm |
| Cable Length | 275 mm. 385 mm. 515 mm. 525 mm. 630 mm. 635 mm. 680 mm. 790 mm |
| Quantity | 10 |
| Length 1 | 425 mm |
| Net weight | 0.756 kg |
| Type | Ignition Cable Kit |
| Extra Description | Lucas Premium Blade |
Important compatibility info
| Number of grooves | 7 |
| Type | Compressor, air conditioning |
| Manufacturer Restriction | DENSO, PORSCHE |
| for OE number | 94812601102 |
| Compressor ID | 7SEU17C |
| Refrigerant | R 134a |
| Length | 228.3 mm |
| Height | 138 mm |
| Number of Ribs | 7 |
| Belt Pulley Diameter | 120 mm |
| Quality | OE |
| Function | Compressor, air conditioning |
| Weight | 5700 g |
| Oil Fill Quantity | 110 ml |
| Compressor Oil | ND-8 |
| Mounting Type | Bolted |
| Gross Weight | 6510 g |
Important compatibility info
| Number of grooves | 7 |
| Type | Compressor, air conditioning |
| Manufacturer Restriction | DENSO, PORSCHE |
| for OE number | 94812601102 |
| Compressor ID | 7SEU17C |
| Refrigerant | R 134a |
| Length | 228.3 mm |
| Height | 138 mm |
| Number of Ribs | 7 |
| Belt Pulley Diameter | 120 mm |
| Quality | OE |
| Function | Compressor, air conditioning |
| Weight | 5700 g |
| Oil Fill Quantity | 110 ml |
| Compressor Oil | ND-8 |
| Mounting Type | Bolted |
| Gross Weight | 6510 g |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023






















