Important compatibility info
Important compatibility info
| Extra Description | LuK DMF |
| Additional Information | with pilot bearing |
| Number of mounting bores | 6 |
| Function | Flywheel |
| Transmission Type | Manual Transmission |
| Type | Flywheel |
Important compatibility info
| Extra Description | LuK DMF |
| Additional Information | with pilot bearing |
| Number of mounting bores | 6 |
| Function | Flywheel |
| Transmission Type | Manual Transmission |
| Type | Flywheel |
Important compatibility info
| Function | Fuel Pump |
| Type | Fuel Pump |
| Gross Weight | 8.387 kg |
Important compatibility info
| Function | Fuel Pump |
| Type | Fuel Pump |
| Gross Weight | 8.387 kg |
Important compatibility info
| Additional Information 2 | with screw set |
| Outer diameter | 294 mm |
| Engine Version | for engines with dual-mass flywheel |
| Weight | 15.36 kg |
| Number of mounting bores | 6 |
| for flywheel depth | 79 mm |
| Type | Flywheel |
| Function | Flywheel |
| Extra Description | DUAL MASS FLYWHEEL |
| Tightening Torque | 105 Nm |
Important compatibility info
| Additional Information 2 | with screw set |
| Outer diameter | 294 mm |
| Engine Version | for engines with dual-mass flywheel |
| Weight | 15.36 kg |
| Number of mounting bores | 6 |
| for flywheel depth | 79 mm |
| Type | Flywheel |
| Function | Flywheel |
| Extra Description | DUAL MASS FLYWHEEL |
| Tightening Torque | 105 Nm |
Important compatibility info
| Thread Measurement 1 | M 26 x 1,5 |
| Thread Measurement 2 | M 16 x 1,5 |
| Operating Mode | Hydraulic |
| Bolt Hole Circle Diameter | 158 mm |
| Rotation Direction | Anticlockwise rotation |
| Number of mounting bores | 3 |
| Pressure | 180 bar |
| Pump Type | Vane Pump |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
Important compatibility info
| Thread Measurement 1 | M 26 x 1,5 |
| Thread Measurement 2 | M 16 x 1,5 |
| Operating Mode | Hydraulic |
| Bolt Hole Circle Diameter | 158 mm |
| Rotation Direction | Anticlockwise rotation |
| Number of mounting bores | 3 |
| Pressure | 180 bar |
| Pump Type | Vane Pump |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
Important compatibility info
| Type | Soot/Particulate Filter, exhaust system |
| To be used with part number(s) | FK11245, PP11245A, PP11245B, PP11245C |
| Function | Soot/Particulate Filter, exhaust system |
| Labels & Certifications | Euro 4 |
| Material | Cordierite |
| Product met | Euro 4 |
| Includes fitting kit | FK11245A |
| Guarantee | 2 years guarantee |
Important compatibility info
| Type | Soot/Particulate Filter, exhaust system |
| To be used with part number(s) | FK11245, PP11245A, PP11245B, PP11245C |
| Function | Soot/Particulate Filter, exhaust system |
| Labels & Certifications | Euro 4 |
| Material | Cordierite |
| Product met | Euro 4 |
| Includes fitting kit | FK11245A |
| Guarantee | 2 years guarantee |
Important compatibility info
| Function | Water Pump, engine cooling |
| for OE number | 2260722 |
| Type | Water Pump, engine cooling |
Important compatibility info
| Function | Water Pump, engine cooling |
| for OE number | 2260722 |
| Type | Water Pump, engine cooling |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Height | 36.1 mm |
| Outer diameter | 356 mm |
| Additional Information 2 | with bolts/screws |
| Brake Disc Thickness | 22 mm |
| Number of Holes | 5 |
| Minimum thickness | 20.5 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Extra Description | XTRA LINE - Xtra |
| Rotor Style | perforated/vented |
Additional Information
Brief Information
PVT vented disc. The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking.
General Information
The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Height | 36.1 mm |
| Outer diameter | 356 mm |
| Additional Information 2 | with bolts/screws |
| Brake Disc Thickness | 22 mm |
| Number of Holes | 5 |
| Minimum thickness | 20.5 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Extra Description | XTRA LINE - Xtra |
| Rotor Style | perforated/vented |
Additional Information
Brief Information
PVT vented disc. The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking.
General Information
The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.
Important compatibility info
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
| Additionally required parts | Mounting Kit, motor-specific oil supply lines (feed/return) |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | Garrett Turbo REMAN |
| Manufacturer | Garrett |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with dryer |
| Vehicle Equipment | for vehicles with level control |
| Packaging height | 22 cm |
| Packaging width | 19 cm |
| Braking / Drive Dynamics | for vehicles with EDC, for vehicles without EDC |
| Spring Type | for vehicles with rear axle air suspension |
| Net weight | 4.1 kg |
| Manufactured in | Germany |
| Function | Compressor, compressed-air system |
| Packaging length | 30 cm |
| Extra Description | Original OES-Product |
| Type | Compressor, compressed-air system |
| Weight | 4.4 kg |
| Additional Information | Relay replacement necessary, with relay |
Important compatibility info
| Additional Information 2 | with dryer |
| Vehicle Equipment | for vehicles with level control |
| Packaging height | 22 cm |
| Packaging width | 19 cm |
| Braking / Drive Dynamics | for vehicles with EDC, for vehicles without EDC |
| Spring Type | for vehicles with rear axle air suspension |
| Net weight | 4.1 kg |
| Manufactured in | Germany |
| Function | Compressor, compressed-air system |
| Packaging length | 30 cm |
| Extra Description | Original OES-Product |
| Type | Compressor, compressed-air system |
| Weight | 4.4 kg |
| Additional Information | Relay replacement necessary, with relay |
Important compatibility info
| for OE number | 74 82 361 119 |
| Outer diameter | 270 mm |
| Thickness | 170 mm |
| Operating Mode | Electric |
| Number of Connectors / Ports | 7 |
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
| Hole Spacing | 214 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 74 82 361 119 |
| Outer diameter | 270 mm |
| Thickness | 170 mm |
| Operating Mode | Electric |
| Number of Connectors / Ports | 7 |
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
| Hole Spacing | 214 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Air Suspension Strut |
| Function | Air Suspension Strut |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Air Suspension Strut |
| Function | Air Suspension Strut |
Important compatibility info
| Additional Information 2 | with flywheel, with screw set |
| Number of mounting bores | 8 |
| Extra Description | LuK RepSet DMF |
| Function | Clutch Kit |
| Additional Information | with central slave cylinder, with pilot bearing |
| Adjustment | with automatic adjustment |
| Type | Clutch Kit |
Additional Information
- 1x LuK Screw Set, flywheel (411016010)
- 1x LuK Flywheel (415030910)
- 1x LuK Clutch Kit (624324733)
Important compatibility info
| Additional Information 2 | with flywheel, with screw set |
| Number of mounting bores | 8 |
| Extra Description | LuK RepSet DMF |
| Function | Clutch Kit |
| Additional Information | with central slave cylinder, with pilot bearing |
| Adjustment | with automatic adjustment |
| Type | Clutch Kit |
Additional Information
- 1x LuK Screw Set, flywheel (411016010)
- 1x LuK Flywheel (415030910)
- 1x LuK Clutch Kit (624324733)
Important compatibility info
| Extra Description | Approved |
| To be used with part number(s) | FK91101 |
| Inspection Tag | E57-103R |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Product met | Euro 3 |
| Material | Ceramic |
Important compatibility info
| Extra Description | Approved |
| To be used with part number(s) | FK91101 |
| Inspection Tag | E57-103R |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Product met | Euro 3 |
| Material | Ceramic |
Important compatibility info
| Type | Soot/Particulate Filter, exhaust system |
| Function | Soot/Particulate Filter, exhaust system |
| Labels & Certifications | Euro 6 |
Additional Information
Important compatibility info
| Type | Soot/Particulate Filter, exhaust system |
| Function | Soot/Particulate Filter, exhaust system |
| Labels & Certifications | Euro 6 |
Additional Information
Important compatibility info
| Pitch circle diameter, hub | 72 mm |
| Number of Teeth | 112 |
| Function | Flywheel |
| Hub internal diameter | 42 mm |
| Number of clutch pressure plate fastening holes | 6 |
| Hub external diameter | 116.7 mm |
| Running surface internal diameter | 146.30 mm |
| External diameter, clutch pressure plate | 267 mm |
| Hub fastening hole diameter | 12 mm |
| Pitch circle diameter, clutch pressure plate | 250.98 mm |
| Number of hub fastening holes | 8 |
| Type | Flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023














