Important compatibility info
| Placement on Vehicle | Lower |
| Voltage | 12 V |
| Operating Mode | Electric |
| Function | Auxiliary water pump (cooling water circuit) |
| Type | Auxiliary water pump (cooling water circuit) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Type | Compressor, compressed-air system |
| Function | Compressor, compressed-air system |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Type | Compressor, compressed-air system |
| Function | Compressor, compressed-air system |
Important compatibility info
| Vehicle Equipment | for vehicles with electr. auxiliary heater |
| Type | Heat Exchanger, interior heating |
| Function | Heat Exchanger, interior heating |
| Core Length | 1 mm |
| Core Width | 1 mm |
| Core Depth | 1 mm |
Important compatibility info
| Vehicle Equipment | for vehicles with electr. auxiliary heater |
| Type | Heat Exchanger, interior heating |
| Function | Heat Exchanger, interior heating |
| Core Length | 1 mm |
| Core Width | 1 mm |
| Core Depth | 1 mm |
Important compatibility info
| Housing material | Aluminium |
| Operating Mode | electromagnetic |
| Number of Connectors / Ports | 4 |
| Function | Water Pump, engine cooling |
| Additional Information 2 | with bolts/screws |
| Type | Water Pump, engine cooling |
| Additional Information | without gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Aluminium |
| Operating Mode | electromagnetic |
| Number of Connectors / Ports | 4 |
| Function | Water Pump, engine cooling |
| Additional Information 2 | with bolts/screws |
| Type | Water Pump, engine cooling |
| Additional Information | without gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Function | Soot/Particulate Filter, exhaust system |
| Guarantee | 3 years guarantee |
| Material | Silicon carbide |
| Type | Soot/Particulate Filter, exhaust system |
| Labels & Certifications | Euro 4 |
| To be used with part number(s) | FK11067, PP11067A, PP11067B |
| Product met | Euro 4 |
Important compatibility info
| Placement on Vehicle | Right |
| Function | Soot/Particulate Filter, exhaust system |
| Guarantee | 3 years guarantee |
| Material | Silicon carbide |
| Type | Soot/Particulate Filter, exhaust system |
| Labels & Certifications | Euro 4 |
| To be used with part number(s) | FK11067, PP11067A, PP11067B |
| Product met | Euro 4 |
Important compatibility info
| Type | Compressor, air conditioning |
| Refrigerant | R 1234yf, R 134a |
| Compressor Oil | PAG 46 YF |
| Number of grooves | 6 |
| Pulleys | without V-ribbed belt pulley |
| Belt Pulley Diameter | 112 mm |
| Connector Shape | oval |
| Manufacturer Restriction | GENUINE HANON |
| Extra Description | GENUINE |
| Function | Compressor, air conditioning |
Important compatibility info
| Type | Compressor, air conditioning |
| Refrigerant | R 1234yf, R 134a |
| Compressor Oil | PAG 46 YF |
| Number of grooves | 6 |
| Pulleys | without V-ribbed belt pulley |
| Belt Pulley Diameter | 112 mm |
| Connector Shape | oval |
| Manufacturer Restriction | GENUINE HANON |
| Extra Description | GENUINE |
| Function | Compressor, air conditioning |
Important compatibility info
| Number of Teeth | 23 |
| Friction Lining Outer Diameter | 240 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Hub Profile | 23x26 |
| Extra Description | 3-1 Kit |
| Additional Information 2 | with clutch release bearing |
Important compatibility info
| Number of Teeth | 23 |
| Friction Lining Outer Diameter | 240 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Hub Profile | 23x26 |
| Extra Description | 3-1 Kit |
| Additional Information 2 | with clutch release bearing |
Important compatibility info
| Placement on Vehicle | Front |
| Material | Cordierite |
| Inspection Tag | E57-103R |
| Type | Soot/Particulate Filter, exhaust system |
| Guarantee | 2 years guarantee |
| Function | Soot/Particulate Filter, exhaust system |
| Extra Description | Approved |
| Labels & Certifications | Euro 6 |
| Product met | Euro 6 |
| To be used with part number(s) | FK11562, PP11562A, PP11562B |
Important compatibility info
| Placement on Vehicle | Front |
| Material | Cordierite |
| Inspection Tag | E57-103R |
| Type | Soot/Particulate Filter, exhaust system |
| Guarantee | 2 years guarantee |
| Function | Soot/Particulate Filter, exhaust system |
| Extra Description | Approved |
| Labels & Certifications | Euro 6 |
| Product met | Euro 6 |
| To be used with part number(s) | FK11562, PP11562A, PP11562B |
Important compatibility info
| Function | Nozzle and Holder Assembly |
| Manufacturer Restriction | Siemens |
| Housing Colour | black/grey |
| Type | Nozzle and Holder Assembly |
| Net weight | 0.52 kg |
| Number of Inlets / Outlets | 3 |
Important compatibility info
| Function | Nozzle and Holder Assembly |
| Manufacturer Restriction | Siemens |
| Housing Colour | black/grey |
| Type | Nozzle and Holder Assembly |
| Net weight | 0.52 kg |
| Number of Inlets / Outlets | 3 |
Important compatibility info
| Net weight | 0.408 kg |
| Function | Nozzle and Holder Assembly |
| Manufacturer Restriction | Siemens |
| Type | Nozzle and Holder Assembly |
| Weight | 0.458 kg |
| Number of Inlets / Outlets | 3 |
| Housing Colour | Black |
Important compatibility info
| Net weight | 0.408 kg |
| Function | Nozzle and Holder Assembly |
| Manufacturer Restriction | Siemens |
| Type | Nozzle and Holder Assembly |
| Weight | 0.458 kg |
| Number of Inlets / Outlets | 3 |
| Housing Colour | Black |
Important compatibility info
| Manufacturer Restriction | Siemens |
| Function | Nozzle and Holder Assembly |
| Housing Colour | Black |
| Type | Nozzle and Holder Assembly |
| Net weight | 0.552 kg |
| Number of Inlets / Outlets | 3 |
| Replaces | 87252 |
Important compatibility info
| Manufacturer Restriction | Siemens |
| Function | Nozzle and Holder Assembly |
| Housing Colour | Black |
| Type | Nozzle and Holder Assembly |
| Net weight | 0.552 kg |
| Number of Inlets / Outlets | 3 |
| Replaces | 87252 |
Important compatibility info
| Additional Information 2 | with radiator fan shroud, Brushless Motor |
| Voltage | 12 V |
| Number of Poles | 3 -pin connector |
| Diameter 1 | 517 mm |
| Rated Power | 600 W |
| Connector Shape | D Shape |
| Heating / Cooling | Single Fan |
| Number of Fan Blades | 7 |
| Type | Fan, engine cooling |
| Function | Fan, engine cooling |
Important compatibility info
| Additional Information 2 | with radiator fan shroud, Brushless Motor |
| Voltage | 12 V |
| Number of Poles | 3 -pin connector |
| Diameter 1 | 517 mm |
| Rated Power | 600 W |
| Connector Shape | D Shape |
| Heating / Cooling | Single Fan |
| Number of Fan Blades | 7 |
| Type | Fan, engine cooling |
| Function | Fan, engine cooling |
Important compatibility info
| Function | EGR Valve |
| Additional Information | with EGR cooler |
| Type | EGR Valve |
| Operating Mode | Electric |
| Number of Poles | 5 -pin connector |
Important compatibility info
| Function | EGR Valve |
| Additional Information | with EGR cooler |
| Type | EGR Valve |
| Operating Mode | Electric |
| Number of Poles | 5 -pin connector |
Important compatibility info
| Cooling Type | air-cooled |
| Type | Charge Air Cooler |
| Function | Charge Air Cooler |
| Radiator type | Brazed cooling fins |
| Core Length | 823 mm |
| Core Width | 560 mm |
| Core Depth | 62 mm |
Important compatibility info
| Cooling Type | air-cooled |
| Type | Charge Air Cooler |
| Function | Charge Air Cooler |
| Radiator type | Brazed cooling fins |
| Core Length | 823 mm |
| Core Width | 560 mm |
| Core Depth | 62 mm |
Important compatibility info
| Additional Information 2 | without sensor |
| Fill Medium | Mineral Oil |
| Type | Central Slave Cylinder, clutch |
| Function | Central Slave Cylinder, clutch |
Important compatibility info
| Additional Information 2 | without sensor |
| Fill Medium | Mineral Oil |
| Type | Central Slave Cylinder, clutch |
| Function | Central Slave Cylinder, clutch |
Important compatibility info
| for steering gear manufacturer | TRW |
| Number of steering wheel turns | 3.8 |
| Position / Degree | 11 ° |
| Input shaft connector type | untoothed |
| Length | 1475 mm |
| Number of mounting bores | 2 |
| for steering gear ID | 37502349 |
| Input shaft height | 55 mm |
| Function | Steering Gear |
| Operating Mode | Hydraulic |
| Vehicle Equipment | for vehicles without steering angle sensor |
| Tie Rod Thread Size | M16 x 1.5 |
| Steering Gear Type | Rack and Pinion Steering Gear |
| Type | Steering Gear |
| Additional Information 2 | with snap lock |
Important compatibility info
| for steering gear manufacturer | TRW |
| Number of steering wheel turns | 3.8 |
| Position / Degree | 11 ° |
| Input shaft connector type | untoothed |
| Length | 1475 mm |
| Number of mounting bores | 2 |
| for steering gear ID | 37502349 |
| Input shaft height | 55 mm |
| Function | Steering Gear |
| Operating Mode | Hydraulic |
| Vehicle Equipment | for vehicles without steering angle sensor |
| Tie Rod Thread Size | M16 x 1.5 |
| Steering Gear Type | Rack and Pinion Steering Gear |
| Type | Steering Gear |
| Additional Information 2 | with snap lock |
Important compatibility info
| Outer diameter | 250 mm |
| Additional Information | with flywheel screws |
| Function | Flywheel |
| Extra Description | Dual-mass flywheel |
| Type | Flywheel |
Important compatibility info
| Outer diameter | 250 mm |
| Additional Information | with flywheel screws |
| Function | Flywheel |
| Extra Description | Dual-mass flywheel |
| Type | Flywheel |
Important compatibility info
| Product met | Euro 5 |
| Type | Soot/Particulate Filter, exhaust system |
| Guarantee | 2 years guarantee |
| Extra Description | Approved |
| Function | Soot/Particulate Filter, exhaust system |
| Material | Cordierite |
| Includes fitting kit | FK11160B |
| Labels & Certifications | Up to Euro 5 |
| Inspection Tag | E24-103R |
| To be used with part number(s) | FK11160 |
Important compatibility info
| Product met | Euro 5 |
| Type | Soot/Particulate Filter, exhaust system |
| Guarantee | 2 years guarantee |
| Extra Description | Approved |
| Function | Soot/Particulate Filter, exhaust system |
| Material | Cordierite |
| Includes fitting kit | FK11160B |
| Labels & Certifications | Up to Euro 5 |
| Inspection Tag | E24-103R |
| To be used with part number(s) | FK11160 |
Important compatibility info
| Function | Fuel Pump |
| Type | Fuel Pump |
Important compatibility info
| Function | Fuel Pump |
| Type | Fuel Pump |
Important compatibility info
Important compatibility info
| Function | Clutch Kit |
| Additional Information | with central slave cylinder |
| Diameter | 240 mm |
| Extra Description | LuK RepSet Pro |
| Adjustment | with automatic adjustment |
| Type | Clutch Kit |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510003510)
- 1x LuK Clutch Kit (624397809)
Important compatibility info
| Function | Clutch Kit |
| Additional Information | with central slave cylinder |
| Diameter | 240 mm |
| Extra Description | LuK RepSet Pro |
| Adjustment | with automatic adjustment |
| Type | Clutch Kit |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510003510)
- 1x LuK Clutch Kit (624397809)
Important compatibility info
| Additional Information | with control unit |
| Additional Information 2 | with radiator fan shroud, Brushless Motor |
| Voltage | 12 V |
| Number of Poles | 4 -pin connector |
| Diameter 1 | 481 mm |
| Rated Power | 600 W |
| Connector Shape | D Shape |
| Heating / Cooling | Single Fan |
| Number of Fan Blades | 7 |
| Type | Fan, engine cooling |
| Function | Fan, engine cooling |
Important compatibility info
| Additional Information | with control unit |
| Additional Information 2 | with radiator fan shroud, Brushless Motor |
| Voltage | 12 V |
| Number of Poles | 4 -pin connector |
| Diameter 1 | 481 mm |
| Rated Power | 600 W |
| Connector Shape | D Shape |
| Heating / Cooling | Single Fan |
| Number of Fan Blades | 7 |
| Type | Fan, engine cooling |
| Function | Fan, engine cooling |
Important compatibility info
| Material | Ceramic |
| Inspection Tag | E57-103R |
| Type | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Includes fitting kit | FK92192A |
| Product met | Euro 6 |
| To be used with part number(s) | FK92192 |
Important compatibility info
| Material | Ceramic |
| Inspection Tag | E57-103R |
| Type | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Includes fitting kit | FK92192A |
| Product met | Euro 6 |
| To be used with part number(s) | FK92192 |
Important compatibility info
| Type | Catalytic Converter |
| Function | Catalytic Converter |
Additional Information
Important compatibility info
| Type | Catalytic Converter |
| Function | Catalytic Converter |
Additional Information
Important compatibility info
| Product met | Euro 4 |
| To be used with part number(s) | FK80583 |
| Inspection Tag | E9-103R |
| Type | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Includes fitting kit | FK80583B |
| Placement on Vehicle | Front |
| Material | Ceramic |
Important compatibility info
| Product met | Euro 4 |
| To be used with part number(s) | FK80583 |
| Inspection Tag | E9-103R |
| Type | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Includes fitting kit | FK80583B |
| Placement on Vehicle | Front |
| Material | Ceramic |
Important compatibility info
| Extra Description | LuK DMF |
| Number of mounting bores | 8 |
| Transmission Type | Manual Transmission |
| Function | Flywheel |
| Type | Flywheel |
Important compatibility info
| Extra Description | LuK DMF |
| Number of mounting bores | 8 |
| Transmission Type | Manual Transmission |
| Function | Flywheel |
| Type | Flywheel |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023























