Important compatibility info
| Additional Information | with gaskets/seals |
| Type | EGR Module |
| Function | EGR Module |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gaskets/seals |
| Type | EGR Module |
| Function | EGR Module |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Pressure Hose Connector Thread Size | M12/M14 |
| Input shaft connector type | toothed |
| Input shaft height | 52 mm |
| for steering gear manufacturer | TRW |
| for steering gear ID | A0014931 |
| Steering Gear Type | Rack and Pinion Steering Gear |
| Tie Rod Thread Size | M14 x 1.5 |
| Operating Mode | Hydraulic |
| Function | Steering Gear |
| Number of mounting bores | 2 |
| Position / Degree | 5 ° |
| Number of steering wheel turns | 2.8 |
| Type | Steering Gear |
| Additional Information 2 | with screw connection |
| Length | 1165 mm |
Important compatibility info
| Pressure Hose Connector Thread Size | M12/M14 |
| Input shaft connector type | toothed |
| Input shaft height | 52 mm |
| for steering gear manufacturer | TRW |
| for steering gear ID | A0014931 |
| Steering Gear Type | Rack and Pinion Steering Gear |
| Tie Rod Thread Size | M14 x 1.5 |
| Operating Mode | Hydraulic |
| Function | Steering Gear |
| Number of mounting bores | 2 |
| Position / Degree | 5 ° |
| Number of steering wheel turns | 2.8 |
| Type | Steering Gear |
| Additional Information 2 | with screw connection |
| Length | 1165 mm |
Important compatibility info
| Type | Injector |
| Function | Injector |
| Packaging height | 7.2 cm |
| Packaging length | 29.1 cm |
| Packaging width | 12.3 cm |
| Gross Weight | 0.843 kg |
| Exhaust Emission Norm | Euro 6 |
| Fuel Type | Diesel |
| Manufacturer Restriction | DELPHI |
| Suited for engine type | Unit Injector (UI) |
Important compatibility info
| Type | Injector |
| Function | Injector |
| Packaging height | 7.2 cm |
| Packaging length | 29.1 cm |
| Packaging width | 12.3 cm |
| Gross Weight | 0.843 kg |
| Exhaust Emission Norm | Euro 6 |
| Fuel Type | Diesel |
| Manufacturer Restriction | DELPHI |
| Suited for engine type | Unit Injector (UI) |
Important compatibility info
| Number of Connectors / Ports | 3 |
| Operating Mode | Electric-hydraulic |
| Function | Hydraulic Pump, steering |
| Type | Hydraulic Pump, steering |
Important compatibility info
| Number of Connectors / Ports | 3 |
| Operating Mode | Electric-hydraulic |
| Function | Hydraulic Pump, steering |
| Type | Hydraulic Pump, steering |
Important compatibility info
| Type | Propshaft, axle drive |
| Bolt Hole Circle Diameter 1 | 96 mm |
| Placement on Vehicle | Rear Axle |
| Length | 2138 mm |
| Additional Information 2 | with holding frame |
| Number of mounting bores | 2 |
| Multi-piece | two-piece |
| Bolt Hole Circle Diameter 2 | 105 mm |
| No. of holes 1 | 3 |
| No. of holes 2 | 3 |
| Function | Propshaft, axle drive |
Important compatibility info
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
| Additionally required parts | Mounting Kit, motor-specific oil supply lines (feed/return) |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | Garrett Turbo NEW |
| Manufacturer | Garrett |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Specification | FULL FITKIT SUPPLIED |
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
| Function | Charger, charging (supercharged/turbocharged) |
Important compatibility info
| Transmission Type | Dual-Clutch Transmission |
| Number of mounting bores | 10 |
| Clutch Type | for wet clutch |
| Type | Flywheel |
| Function | Flywheel |
| Extra Description | LuK DMF |
Important compatibility info
| Transmission Type | Dual-Clutch Transmission |
| Number of mounting bores | 10 |
| Clutch Type | for wet clutch |
| Type | Flywheel |
| Function | Flywheel |
| Extra Description | LuK DMF |
Important compatibility info
| Placement on Vehicle | Left Front |
| Paired article numbers | MA-AS277 |
| Shock Absorber Mounting Type | Top yoke, Bottom Pin |
| Suspension | for vehicles with electronic suspension control |
| Drive Type | All-wheel Drive |
| Spring Type | for vehicles with air suspension |
| Type | Air Suspension Strut |
| Function | Air Suspension Strut |
Important compatibility info
| Placement on Vehicle | Left Front |
| Paired article numbers | MA-AS277 |
| Shock Absorber Mounting Type | Top yoke, Bottom Pin |
| Suspension | for vehicles with electronic suspension control |
| Drive Type | All-wheel Drive |
| Spring Type | for vehicles with air suspension |
| Type | Air Suspension Strut |
| Function | Air Suspension Strut |
Important compatibility info
| for OE number | 04L 130 755 E |
| Injection System | Common Rail |
| Type | Fuel Pump |
| Function | Fuel Pump |
| Replaces | DFP0445010570 |
| Gross Weight | 3.426 kg |
Important compatibility info
| for OE number | 04L 130 755 E |
| Injection System | Common Rail |
| Type | Fuel Pump |
| Function | Fuel Pump |
| Replaces | DFP0445010570 |
| Gross Weight | 3.426 kg |
Important compatibility info
| Extra Description | ThermalPro™ |
| Operating Mode | Electric |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Number of Pins | 4 |
| Plug Type | Male |
| Number of Inlets / Outlets | 2 |
| Pin Shape | Flat |
Important compatibility info
| Extra Description | ThermalPro™ |
| Operating Mode | Electric |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Number of Pins | 4 |
| Plug Type | Male |
| Number of Inlets / Outlets | 2 |
| Pin Shape | Flat |
Important compatibility info
| Function | Soot/Particulate Filter, exhaust system |
| Type | Soot/Particulate Filter, exhaust system |
| Guarantee | 3 years guarantee |
| Inspection Tag | E24-103R |
| Extra Description | Approved |
| Labels & Certifications | Euro 5 |
| Product met | Euro 5 |
| To be used with part number(s) | FK11617 |
| Material | Silicon carbide |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023











