Important compatibility info
Placement on Vehicle | Left Rear, Right Rear |
Length | 1613 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket Set, wheel hub |
Placement on Vehicle | Rear Axle |
Type | Gasket Set, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel hub (15551)
- 1x Febi Seal Ring, wheel hub (06763)
- 1x Febi Circlip (06761)
Important compatibility info
Height | 143 mm |
Filter type | Spin-on Filter |
Function | Fuel filter |
Outer diameter | 95 mm |
Internal Thread Size | M16 x 1,5 |
Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 635 mm |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Function | Warning Contact, brake pad wear |
Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 240 mm |
Height | 31 mm |
Width | 204 mm |
Filter type | Activated Carbon Filter |
Type | Filter, cabin air |
Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 147 mm |
Outer diameter | 58 mm |
Inner diameter | 27 mm |
Filter type | Filter Insert |
Seal Diameter | 62.5 mm |
Type | Oil Filter |
Function | Oil Filter |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left |
Function | Wheel Brake Cylinder |
Paired article numbers | 108024 |
Piston Diameter | 20.6 mm |
Type | Wheel Brake Cylinder |
Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 67 mm |
Opening Temperature | 80 °C |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 150 mm |
Type | Exhaust Valve |
Notches / Holes Number | 1 |
Valve head diameter | 38 mm |
Valve stem diameter | 8 mm |
Function | Exhaust Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Coolant Flange |
Type | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 136 mm |
Width | 109 mm |
Material | Rubber/Metal |
Outer diameter | 76 mm |
Inner diameter | 27 mm |
Placement on Vehicle | Front Axle |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Height | 40 mm |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,25, M16 x 1,5 |
Length | 85 mm |
Material | Steel |
Paired article numbers | 33533 |
Type | Tie Rod End |
Function | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
Thickness | 64 mm |
Inner diameter | 12 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 57 mm |
Placement on Vehicle | Front Axle Right, Lower, Rear |
Material | Rubber/Metal |
Thickness | 55 mm |
Inner diameter | 18 mm |
Paired article numbers | 31365 |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 120 mm |
Width | 55 mm |
Material | Rubber/Metal |
Thickness | 54 mm |
Mounting points diameter | 9 mm |
Placement on Vehicle | Rear Axle |
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 12 mm |
Function | Dust Cover Kit, shock absorber |
Material | Plastic, PU (Polyurethane), Thermoplast |
Placement on Vehicle | Rear Axle |
Thickness | 270 mm |
Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 269 mm |
Height | 30 mm |
Width | 156 mm |
Filter type | Activated Carbon Filter |
Function | Filter, cabin air |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right Rear, Left Rear |
Length | 1680 mm |
Function | Cable Pull, parking brake |
Replaces | 16917 |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cable Length | 250 mm |
Function | Plug |
Cross Section | 0.75 mm² |
Type | Plug |
Number of Connectors / Ports | 2 |
Additional Information 2 | with plug |
Additional Information | with squeeze connector |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Function | Repair Kit, suspension strut support mount |
Type | Repair Kit, suspension strut support mount |
Placement on Vehicle | Rear Axle |
Additional Information 2 | with fastening material, without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Hose |
Type | Brake Hose |
Length | 495 mm |
External Thread Size | M10 x 1 |
Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1 |
Length | 232 mm |
Function | Brake Hose |
Type | Brake Hose |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, outer |
Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Accessory Kit, brake shoes |
Type | Accessory Kit, brake shoes |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Air Filter |
Outer diameter | 148 mm |
Height | 230 mm |
Inner diameter | 62 mm |
Function | Air Filter |
Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 50 mm |
Width | 50 mm |
Material | Rubber/Metal |
Thickness | 41 mm |
Inner diameter | 24 mm |
Type | Mounting, stabiliser bar |
Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, exterior temperature |
Number of Connectors / Ports | 2 |
Type | Sensor, exterior temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, transmission sided |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 68 mm |
Material | Rubber |
Length | 88 mm |
Type | Bellow Kit, drive shaft |
Inner diameter 1 | 29 mm |
Joint Type | Tripod Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (01113)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38759)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Outer diameter 1 | 59 mm |
Width 1 | 16 mm |
Outer diameter 2 | 45 mm |
Width 2 | 15.5 mm |
Bearing Type | Tapered Roller Bearing |
Function | Wheel Bearing Kit |
Inner diameter 1 | 32 mm |
Inner diameter 2 | 19 mm |
Type | Wheel Bearing Kit |
Additional Information 2 | with shaft seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Additional Information 2 | without guide sleeve |
Function | Repair Kit, brake caliper |
Type | Repair Kit, brake caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Filter, cabin air |
Function | Filter, cabin air |
Height | 30 mm |
Length | 340 mm |
Filter type | Pollen Filter |
Width | 179 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Teeth, ABS ring | 100 |
Function | Sensor Ring, ABS |
Material | Steel |
Outer diameter | 148 mm |
Thickness | 13.3 mm |
Inner diameter | 118 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Function | Injector Holder |
Distance of fastening bolts | 12 mm |
Type | Injector Holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 74 mm |
Placement on Vehicle | Outer, Front Axle Left, Front Axle Right |
Type | Tie Rod End |
Function | Tie Rod End |
Spanner Size | 22 |
External Thread Size | M12 x 1,5 |
Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Hose |
Function | Brake Hose |
Length | 502 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, outer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 100 mm |
Height | 14 mm |
Material | ACM (Polyacrylate) |
Function | Shaft Seal, external planetary gearbox |
Type | Shaft Seal, external planetary gearbox |
Inner diameter | 86 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 104 mm |
Material | Steel |
Paired article numbers | 27511 |
Thread Length | 72 mm. 20 mm |
Thread Type | with left-hand thread |
Function | Tie Rod End |
Extra Description | ProKit |
Placement on Vehicle | outer, Front Axle Left |
External Thread Size | M14 x 1,5, M23 x 1,5 |
Type | Tie Rod End |
Cone Size 2 | 16 mm |
Replaces | 43272 |
Additional Information | with lock nut |
Cone Size 1 | 14.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Material | Rubber |
Inner diameter | 26.5 mm |
Function | Mounting, stabiliser bar |
Thickness | 51.2 mm |
Width | 44 mm |
Length | 54 mm |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 355 mm |
Height | 35 mm |
Width | 244 mm |
Filter type | Filter Insert |
Function | Air Filter |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, transmission sided |
Length | 100 mm |
Material | Rubber |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Inner diameter 1 | 21 mm |
Inner diameter 2 | 66 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (38340)
- 1x Febi Fastening Clamp (08406)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
Length | 100 mm |
Material | Thermoplast |
Inner diameter 1 | 29 mm |
Inner diameter 2 | 67 mm |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (38348)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45640)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
Length | 227 mm |
Height | 67 mm |
Width | 204 mm |
Additional Information 2 | with pre-filter |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Filter Insert |
Width | 181 mm |
Height | 45 mm |
Length | 191 mm |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 60 mm |
Outer diameter | 63 mm |
Inner diameter | 55 mm |
Bearing Type | Needle Bearing |
Type | Bush, steering knuckle |
Function | Bush, steering knuckle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Pedal Pad, brake pedal |
Function | Pedal Pad, brake pedal |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Voltage | 12 V |
Function | Washer Fluid Pump, window cleaning |
Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,5 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 270 mm |
Material | Steel |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
External Thread Size | M10 x 1,25 |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,25 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 360 mm |
Material | Steel |
Rod/Strut | Coupling Rod |
Surface | Zinc-coated |
Thread Length | 20 mm |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 465 mm |
Function | Brake Hose |
Internal Thread Size | M10 x 1 |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Thread Type | with right-hand thread |
Function | Tie Rod End |
Type | Tie Rod End |
External Thread Size | M12 x 1,5 |
Internal Thread Size | M14 x 2 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023