Important compatibility info
| Weight | 61 g |
| Additional Information | with gaskets/seals |
| Opening Temperature | 82 °C |
| for OE number | 2550038400 |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Gross Weight | 71 g |
Important compatibility info
| Joint Type | Tripod Joint |
| Placement on Vehicle | Front Axle, transmission sided |
| Length | 102 mm |
| Material | Rubber |
| Inner diameter 2 | 76 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 22 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (01047)
- 1x Febi Clamping Clip (45643)
- 1x Febi Clamping Clip (38757)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Joint Type | Tripod Joint |
| Placement on Vehicle | Front Axle, transmission sided |
| Length | 102 mm |
| Material | Rubber |
| Inner diameter 2 | 76 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 22 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (01047)
- 1x Febi Clamping Clip (45643)
- 1x Febi Clamping Clip (38757)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Function | Radiator Hose |
| Cooling Hose | from expansion tank to engine cooler |
| Type | Radiator Hose |
| for OE number | 124 500 27 75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Radiator Hose |
| Cooling Hose | from expansion tank to engine cooler |
| Type | Radiator Hose |
| for OE number | 124 500 27 75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 95 mm |
| Material | Rubber |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 78 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Joint Type | Tripod Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (173121)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Length | 95 mm |
| Material | Rubber |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 78 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Joint Type | Tripod Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (173121)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Width | 18.6 mm. 10.6 mm |
| Placement on Vehicle | Left |
| Material | ACM (Polyacrylate) |
| Outer diameter | 66.2 mm |
| Inner diameter | 43.2 mm |
| Paired article numbers | 179402 |
| Type | Shaft Seal, differential |
| Function | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 18.6 mm. 10.6 mm |
| Placement on Vehicle | Left |
| Material | ACM (Polyacrylate) |
| Outer diameter | 66.2 mm |
| Inner diameter | 43.2 mm |
| Paired article numbers | 179402 |
| Type | Shaft Seal, differential |
| Function | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Filter, cabin air |
| Width | 209 mm |
| Filter type | Activated Carbon Filter |
| Type | Filter, cabin air |
| Length | 250 mm |
| Height | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Filter, cabin air |
| Width | 209 mm |
| Filter type | Activated Carbon Filter |
| Type | Filter, cabin air |
| Length | 250 mm |
| Height | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Inner diameter 1 | 19 mm |
| Inner diameter 2 | 29 mm |
| Outer diameter 1 | 45 mm |
| Width 1 | 15.5 mm |
| Outer diameter 2 | 50 mm |
| Width 2 | 14 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tab Washer, axle nut (04991)
- 1x Febi Split Pin (05005)
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Inner diameter 1 | 19 mm |
| Inner diameter 2 | 29 mm |
| Outer diameter 1 | 45 mm |
| Width 1 | 15.5 mm |
| Outer diameter 2 | 50 mm |
| Width 2 | 14 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tab Washer, axle nut (04991)
- 1x Febi Split Pin (05005)
Important compatibility info
| Length | 136 mm |
| Material | Plastic |
| Paired article numbers | 37678 |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Rear Axle Left |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| External Thread Size | M10 x 1,5 |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 136 mm |
| Material | Plastic |
| Paired article numbers | 37678 |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Rear Axle Left |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| External Thread Size | M10 x 1,5 |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Paired article numbers | 37677 |
| Material | Plastic |
| Length | 136 mm |
| Placement on Vehicle | Rear Axle Right |
| External Thread Size | M10 x 1,5 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Paired article numbers | 37677 |
| Material | Plastic |
| Length | 136 mm |
| Placement on Vehicle | Rear Axle Right |
| External Thread Size | M10 x 1,5 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Length | 64 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Replaces | 23819 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Length | 64 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Replaces | 23819 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 34 mm |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Placement on Vehicle | Front, Rear, transmission sided |
Important compatibility info
| Length | 34 mm |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Placement on Vehicle | Front, Rear, transmission sided |
Important compatibility info
| Length | 77 mm |
| Inner diameter | 16.1 mm |
| Diameter | 53 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Paired article numbers | FSK6929 |
Important compatibility info
| Length | 77 mm |
| Inner diameter | 16.1 mm |
| Diameter | 53 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Paired article numbers | FSK6929 |
Important compatibility info
| Length | 322 mm |
| Thread Measurement 2 | M14X1.5 |
| Thread Measurement 1 | M14X1.5 |
| Function | Inner Tie Rod |
| Axle Joint Length | 322 mm |
| Type | Inner Tie Rod |
Important compatibility info
| Length | 322 mm |
| Thread Measurement 2 | M14X1.5 |
| Thread Measurement 1 | M14X1.5 |
| Function | Inner Tie Rod |
| Axle Joint Length | 322 mm |
| Type | Inner Tie Rod |
Important compatibility info
| Extra Description | Fuel Parts |
| Function | Sensor, camshaft position |
| Cable Length | 450 mm |
| Sensor Type | Hall Sensor |
| Connector Shape | Oval |
| Technical Information Number | Connector N |
| Number of Poles | 3 -pin connector |
| Additional Information 2 | with cable |
| Weight | 0.1 kg |
| Type | Sensor, camshaft position |
Important compatibility info
| Extra Description | Fuel Parts |
| Function | Sensor, camshaft position |
| Cable Length | 450 mm |
| Sensor Type | Hall Sensor |
| Connector Shape | Oval |
| Technical Information Number | Connector N |
| Number of Poles | 3 -pin connector |
| Additional Information 2 | with cable |
| Weight | 0.1 kg |
| Type | Sensor, camshaft position |
Important compatibility info
| Extra Description | Fuel Parts |
| Function | Control Switch, cruise control |
| Connector Shape | angular |
| Housing Colour | Grey |
| Technical Information Number | Circuit N.O. |
| Spanner Size | N/A |
| Operating Mode | Manual (foot operated) |
| Number of Poles | 2 -pin connector |
| Thread Size | N/A |
| Weight | 0.05 kg |
| Type | Control Switch, cruise control |
Important compatibility info
| Extra Description | Fuel Parts |
| Function | Control Switch, cruise control |
| Connector Shape | angular |
| Housing Colour | Grey |
| Technical Information Number | Circuit N.O. |
| Spanner Size | N/A |
| Operating Mode | Manual (foot operated) |
| Number of Poles | 2 -pin connector |
| Thread Size | N/A |
| Weight | 0.05 kg |
| Type | Control Switch, cruise control |
Important compatibility info
| Title | Haynes Explains Babies |
Additional Information
- Babies is one of the first titles in the brand new Haynes Explains series
- It takes the reader through all stages of baby ownership, giving them all the hints and tips needed to keep them running smoothly
- A light-hearted and entertaining take on the classic workshop manual, it contains everything you’d expect to see including exploded views, flow charts, fault diagnosis and the odd wiring diagram
- Written by bestselling author Boris Starling
Important compatibility info
| Length | 100 mm |
| Thickness | 1.5 mm |
| Shape/Form | angled |
| Diameter 1/ Diameter 2 | 55.5 / 54 mm |
| Height | 68 mm |
| Function | Exhaust Pipe, universal |
| Weight | 0.38 kg |
| Width | 68 mm |
| Type | Exhaust Pipe, universal |
Important compatibility info
| Mounting Type | Bolted |
| Net weight | 0.010 kg |
| Function | Sensor, wheel speed |
| Sensor Type | Active sensor |
| Fitting Depth | 30 mm |
| Connector Shape | D Shape |
| Housing Colour | Green |
| Number of Poles | 2 -pin connector |
| Shape/Form | rectangular |
| Weight | 0.022 kg |
| Type | Sensor, wheel speed |
Important compatibility info
| Mounting Type | Bolted |
| Net weight | 0.010 kg |
| Function | Sensor, wheel speed |
| Sensor Type | Active sensor |
| Fitting Depth | 30 mm |
| Connector Shape | D Shape |
| Housing Colour | Green |
| Number of Poles | 2 -pin connector |
| Shape/Form | rectangular |
| Weight | 0.022 kg |
| Type | Sensor, wheel speed |
Important compatibility info
| Net weight | 0.12 kg |
| Fitting Depth | 40 mm |
| Function | Sensor, wheel speed |
| Connector Shape | Oval |
| Housing Colour | Black |
| Number of Poles | 2 -pin connector |
| Weight | 0.024 kg |
| Mounting Type | Bolted |
| Shape/Form | oval |
| Type | Sensor, wheel speed |
Important compatibility info
| Net weight | 0.12 kg |
| Fitting Depth | 40 mm |
| Function | Sensor, wheel speed |
| Connector Shape | Oval |
| Housing Colour | Black |
| Number of Poles | 2 -pin connector |
| Weight | 0.024 kg |
| Mounting Type | Bolted |
| Shape/Form | oval |
| Type | Sensor, wheel speed |
Important compatibility info
| Terminal Layout | Positive Front Left |
| Type | AGM |
| Terminal Type | F1 Spade Terminal |
| Width | 24 mm |
| Ampere-Hours | 1.2 A |
| Voltage | 6 V |
| Height | 57.5 mm |
| Length | 97 mm |
| Height without pole | 51.5 mm |
| Warranty | 1 year warranty |
Important compatibility info
| Function | Sensor, crankshaft pulse |
| Sensor Type | Inductive Sensor |
| Resistance | 550 Ohm |
| Fitting Depth | 38.5 mm |
| Connector Shape | rectangular |
| Housing Colour | Black |
| Technical Information Number | Connector I |
| Number of Poles | 2 -pin connector |
| Additional Information 2 | without cable, with adapter |
| Weight | 0.107 kg |
| Type | Sensor, crankshaft pulse |
| Shape/Form | round |
| Connecting Angle | 85 ° |
| Net weight | 0.062 kg |
| Extra Description | Lucas Premium Blade |
Important compatibility info
| Function | Sensor, crankshaft pulse |
| Sensor Type | Inductive Sensor |
| Resistance | 550 Ohm |
| Fitting Depth | 38.5 mm |
| Connector Shape | rectangular |
| Housing Colour | Black |
| Technical Information Number | Connector I |
| Number of Poles | 2 -pin connector |
| Additional Information 2 | without cable, with adapter |
| Weight | 0.107 kg |
| Type | Sensor, crankshaft pulse |
| Shape/Form | round |
| Connecting Angle | 85 ° |
| Net weight | 0.062 kg |
| Extra Description | Lucas Premium Blade |
Important compatibility info
| Title | Dual Charge Relay |
Additional Information
With the 20A dual charge relay switch from Maypole, you can be safe in the knowledge that you can run all of your electronic gadgets and gizmos when out on the road without draining your vehicles battery. The 12v, ignition-switch controlled relay allows you to not only power your caravan’s fridge, but it will also keep your auxiliary battery charged, so you can be sure that it is ready for use anytime without doing any damage to your vehicles battery.
Established in 1969, Birmingham based company Maypole has a long heritage in the manufacture and supply to customers in the automotive, trailer, leisure and agricultural markets. For over 40 years Maypole have been manufacturing and supplying its products to its ever growing network of customers and are proud to continue to add to their ever increasing portfolio of products.
- E approved
- Instructions included
- Charges refrigerator and auxiliary battery
- Dual charging caravan relay
Important compatibility info
| Function | Fuel filter |
| Filter type | Spin-on Filter |
| Height | 104 mm |
| Inner diameter 1 | 72 mm |
| Outer diameter 1 | 107 mm |
| Inner diameter 2 | 66 mm |
| Type | Fuel filter |
| Thread Size | M 20 X 1.5, M 36 X 1.5 |
| EU Product Safety Regulation (GPSR) | IEC 60417-6183 mechanical expertise required |
Important compatibility info
| Function | Fuel filter |
| Filter type | Spin-on Filter |
| Height | 104 mm |
| Inner diameter 1 | 72 mm |
| Outer diameter 1 | 107 mm |
| Inner diameter 2 | 66 mm |
| Type | Fuel filter |
| Thread Size | M 20 X 1.5, M 36 X 1.5 |
| EU Product Safety Regulation (GPSR) | IEC 60417-6183 mechanical expertise required |
Important compatibility info
| Length | 75 mm |
| Function | Mounting, control/trailing arm |
| Diameter | 14 mm. 60 mm |
| Type | Mounting, control/trailing arm |
| Placement on Vehicle | outer, Rear Axle Left, Rear Axle Right, Lower |
| Paired article numbers | NST8153 |
Important compatibility info
| Length | 75 mm |
| Function | Mounting, control/trailing arm |
| Diameter | 14 mm. 60 mm |
| Type | Mounting, control/trailing arm |
| Placement on Vehicle | outer, Rear Axle Left, Rear Axle Right, Lower |
| Paired article numbers | NST8153 |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 293 mm |
| Thread Measurement 1 | M16x1,5 |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| Net weight | 0.69 kg |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 293 mm |
| Thread Measurement 1 | M16x1,5 |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| Net weight | 0.69 kg |
Important compatibility info
| Thread Size | 16x1,5 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Net weight | 0.61 kg |
| Paired article numbers | 5033744 |
Important compatibility info
| Thread Size | 16x1,5 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Net weight | 0.61 kg |
| Paired article numbers | 5033744 |
Important compatibility info
| Thread Size | 16x1,5 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Net weight | 0.6 kg |
| Paired article numbers | 5033743 |
Important compatibility info
| Thread Size | 16x1,5 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Net weight | 0.6 kg |
| Paired article numbers | 5033743 |
Important compatibility info
| Length 1 | 1688 mm |
| Placement on Vehicle | Rear |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Replaces | BC3224 |
| Length 2 | 1055 mm |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



























