Important compatibility info
| Material | Rubber |
| Placement on Vehicle | Front Axle, Wheel Side |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 88 mm |
| Inner diameter 1 | 24 mm |
| Length | 84 mm |
| Replaces | 38337 |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
| Placement on Vehicle | Front Axle Right, Rear Axle Right |
| Length | 200 mm |
| Paired article numbers | 26531 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Outer diameter | 8 mm |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,5, M12 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Replaces | 03490 |
| Voltage | 12 V |
| Function | Washer Fluid Pump, headlight cleaning |
| Type | Washer Fluid Pump, headlight cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Link/Coupling Rod, stabiliser bar |
| Inner diameter | 10.2 mm. 8.3 mm |
| Outer diameter | 36 mm. 27.6 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Length | 66 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Colour | Green |
| Number of Connectors / Ports | 3 |
| Function | Sensor, coolant temperature |
| Type | Sensor, coolant temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 119 mm |
| Inner diameter | 80 mm |
| Type | Air Filter |
| Function | Air Filter |
| Filter type | Filter Insert |
| Height | 335 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M12 x 1,5, M10 x 1,5 |
| Placement on Vehicle | Front Axle Left, Lower |
| Paired article numbers | 40669 |
| Function | Ball Joint |
| Extra Description | ProKit |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (40666)
- 1x Febi Nut (39159)
- 3x Febi Nut, ball joint (36734)
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Paired article numbers | 40668 |
| Function | Ball Joint |
| Extra Description | ProKit |
| External Thread Size | M12 x 1,5, M10 x 1,5 |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (40667)
- 1x Febi Nut (39159)
- 3x Febi Nut, ball joint (36734)
Important compatibility info
| Additional Information 2 | with seal ring |
| Outer diameter | 84 mm |
| Inner diameter | 9 mm |
| Type | Fuel filter |
| Function | Fuel filter |
| Height | 86 mm |
| Filter type | Filter Insert |
| Seal Diameter | 77.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Coolant Flange |
| for OE number | 11 12 7 810 707 |
| Additional Information | with gasket/seal |
| Type | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M12 x 1,25 |
| Placement on Vehicle | Front Axle Right |
| Length | 192 mm |
| Thickness | 57 mm |
| Paired article numbers | 48202 |
| Function | Tie Rod End |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | for control arm |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Type | Ball Joint |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Fuel filter |
| Inner diameter | 27 mm |
| Filter type | Filter Insert |
| Internal Thread Size | M30 x 2 |
| Type | Fuel filter |
| Height | 230 mm |
| Outer diameter | 73 mm |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting, manual transmission |
| Function | Mounting, manual transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, water pump |
| Type | Gasket, water pump |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 175 mm |
| Material | Thermoplastic polyester elastomer |
| Additional Information 2 | with clamps |
| Inner diameter 1 | 13 mm |
| Inner diameter 2 | 44 mm |
| Type | Bellow Kit, steering |
| Function | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper, inner, outer |
| Material | Rubber/Metal |
| Outer diameter | 41.6 mm |
| Thickness | 40 mm |
| Inner diameter | 12.2 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bushing, axle beam |
| Thickness | 59.5 mm |
| Placement on Vehicle | Front Axle Left, Front, Front Axle Right |
| Material | Rubber/Metal |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal |
| Height | 38 mm |
| Outer diameter | 42 mm |
| Inner diameter | 11 mm |
| Function | Bush, driver cab suspension |
| Type | Bush, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Thread Length | 23.4 mm |
| Rod/Strut | Coupling Rod |
| Outer diameter | 9 mm |
| Spanner Size | 16 |
| Paired article numbers | 101913 |
| Length | 284 mm |
| Placement on Vehicle | Front Axle Left |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with nuts |
| Function | Link/Coupling Rod, stabiliser bar |
| Thread Length | 23.4 mm |
| Rod/Strut | Coupling Rod |
| Paired article numbers | 100700 |
| Spanner Size | 16 |
| Outer diameter | 9 mm |
| Material | Steel |
| Length | 284 mm |
| Placement on Vehicle | Front Axle Right |
| Extra Description | ProKit |
| External Thread Size | M10 x 1,25 |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 340 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Inner Tie Rod |
| for OE number | 3812.E0 |
| Type | Inner Tie Rod |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Cone Size | 18 mm |
| Function | Ball Joint |
| Type | Ball Joint |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Repair Kit, tilt pump |
| Function | Repair Kit, tilt pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Pipe Diameter | 8 mm |
| Type | Fuel filter |
| Function | Fuel filter |
| Length | 210 mm |
| Outer diameter | 88 mm |
| Filter type | In-Line Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 48 mm |
| Thickness | 45 mm |
| Inner diameter | 10 mm |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Type | Switch, reverse light |
| Function | Switch, reverse light |
| Colour | Blue |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 11 mm |
| Placement on Vehicle | frontal sided |
| Material | PTFE (polytetrafluoroethylene), ACM (Polyacrylate) |
| Inner diameter | 78 mm |
| Function | Shaft Seal, crankshaft |
| Outer diameter | 104 mm |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing Colour | black |
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Type | Stop Light Switch |
| Function | Stop Light Switch |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 172890 |
| Cone Size | 21 mm |
| Type | Ball Joint |
| Function | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 172889 |
| Cone Size | 21 mm |
| Type | Ball Joint |
| Function | Ball Joint |
| Additional Information | with fastening/mounting material |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Type | Coolant Flange |
| Function | Coolant Flange |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M16 x 1,5 |
| Additional Information | with counter nut |
| Length | 295.9 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M16 x 1,5 |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | ProKit |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Steel |
| Spanner Size | 14, 17 |
| Rod/Strut | Coupling Rod |
| Colour | Silver |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,5 |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with nut, with washers |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with valve cover gasket |
| Function | Gasket Set, cylinder head cover |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, cylinder head cover (15186)
- 1x Febi Gasket Set, cylinder head cover (15192)
Important compatibility info
| Length | 100 mm |
| Material | Thermoplast |
| Inner diameter 1 | 29 mm |
| Inner diameter 2 | 69 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (174372)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Height | 35 mm |
| Filter type | Activated Carbon Filter |
| Function | Filter, cabin air |
| Length | 354 mm |
| Width | 236 mm |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 288 mm |
| Outer diameter | 161 mm |
| Inner diameter | 86 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 294 mm |
| Width | 202 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
| Height | 47 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1400 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 75 mm |
| Height | 99 mm |
| Function | Fuel filter |
| Type | Fuel filter |
| Filter type | Filter Insert |
| Inner diameter | 14 mm |
| Seal Diameter | 85.5 mm. 22 mm |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Gasket inner diameter | 70 mm |
| Function | Oil Filter |
| Gasket outer diameter | 78 mm |
| Type | Oil Filter |
| Filter type | Filter Insert |
| Additional Information 2 | with seal ring |
| Outer diameter | 64 mm |
| Inner diameter | 32 mm |
| Height | 123 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with nuts |
| Placement on Vehicle | Front Axle Left |
| Length | 50 mm |
| Paired article numbers | 28272 |
| Rod/Strut | Coupling Rod |
| Colour | Black |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | transmission sided |
| Material | PTFE (polytetrafluoroethylene) |
| Outer diameter | 140.3 mm |
| Thickness | 12 mm |
| Inner diameter | 119 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Cone Size | 20 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, differential |
| Type | Mounting, differential |
| Inner diameter | 12.75 mm |
| Thickness | 61 mm |
| Outer diameter | 61.05 mm |
| Placement on Vehicle | Rear Axle, Front |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 130 mm |
| Width | 40 mm |
| Material | Rubber/Metal |
| Outer diameter | 48 mm |
| Thickness | 12 mm |
| Inner diameter | 19 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
| Hole Spacing | 100 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, stabiliser bar |
| Material | Rubber |
| Inner diameter | 38 mm |
| Length | 69 mm |
| Thickness | 41 mm |
| Width | 69 mm |
| Placement on Vehicle | Front Axle |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M12 x 1,75 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 237 mm |
| Material | Steel |
| Spanner Size | 19 |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































