Important compatibility info
Title | RAV Volvo HU101 Emergency Blade |
Additional Information
- There are many types of key blades however typically automotive manufactures will use the same blade profile across large parts of their vehicle range.
- Key blades are the metal part of the key that is cut specifically to each car.
- This item is non-returnable once cut
- This is a RAV manufactured blade and as such is of better quality than other products.
- An emergency blade for Volvo 5 and 6 button keyless and semi-keyless remotes.
Important compatibility info
Title | RAV Freelander 2 Emergency Blade |
Additional Information
- There are many types of key blades however typically automotive manufactures will use the same blade profile across large parts of their vehicle range.
- Key blades are the metal part of the key that is cut specifically to each car.
- This item is non-returnable once cut
- This is a RAV manufactured blade and as such is of better quality than other products.
- Designed to fit our AUTKC233 but will fit other remotes and cases.
- An emergency blade for Land Rover Freelander 2 slot-in-dash remote
Important compatibility info
Title | Chrysler/Jeep/Renault ID46 Transponder PCF7936 |
Additional Information
- They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
- Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
- Reference: PCF7936 ID46 Renault/Chrysler
- Transponder Type: Carbon
- Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.
- Programming: Diagnostically or EEPROM
Important compatibility info
Title | Mitsubishi PCF7936 Cipher Biphase ID46 Transponder |
Additional Information
- They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
- Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
- Reference: PCF7936 ID46 Mitsubishi
- Transponder Type: Carbon
- Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.
- Programming: Diagnostically or EEPROM
Important compatibility info
Title | T5 Transponder Chip |
Additional Information
- They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
- Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
- This chip can be cloned into: ID11 / ID12 / ID13 / ID33 / ID73
- Reference: T5
- Transponder Type: Carbon
- Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.
Important compatibility info
Title | Audi Megamos ID48 TP25 Glass Transponder Chip |
Additional Information
- They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
- Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
- Programming: Diagnostically or EEPROM
- Reference: ID48 TP25
- Transponder Type: Glass
- Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.
Important compatibility info
Title | Skoda Megamos ID48 TP24 Glass CAN Transponder Chip |
Additional Information
- They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
- Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
- Programming: Diagnostically or EEPROM
- Reference: ID48 TP24 CAN
- Transponder Type: Glass
- Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.
Important compatibility info
Title | Seat Megamos ID48 TP22 Glass CAN Transponder Chip |
Additional Information
- They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
- Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
- Programming: Diagnostically or EEPROM
- Reference: ID48 TP22 CAN
- Transponder Type: Glass
- Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.
Important compatibility info
Function | Gasket, intake manifold |
Type | Gasket, intake manifold |
Important compatibility info
Function | Gasket, intake manifold |
Type | Gasket, intake manifold |
Important compatibility info
Function | Mounting, stabiliser bar |
Inner diameter | 18 mm |
Thickness | 43 mm |
Material | Rubber |
Width | 40 mm |
Length | 42 mm |
Type | Mounting, stabiliser bar |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, stabiliser bar |
Inner diameter | 18 mm |
Thickness | 43 mm |
Material | Rubber |
Width | 40 mm |
Length | 42 mm |
Type | Mounting, stabiliser bar |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Pollen Filter |
Length | 265 mm |
Height | 21 mm |
Width | 215 mm |
Function | Filter, cabin air |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Pollen Filter |
Length | 265 mm |
Height | 21 mm |
Width | 215 mm |
Function | Filter, cabin air |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Current Strength | 30 A |
Temperature range to | 100 °C |
Temperature range from | -40 °C |
Relay function | Normally open contact |
Protection Type (IP Code) | IP5K4 |
Resistance | 16 Ohm |
Number of Poles | 5 -pin connector |
Combi Switch Function | Normally Open Contact |
Voltage | 12 V |
Type | Multifunctional Relay |
Function | Multifunctional Relay |
Replaces | 0332207307; 0332207321 |
Important compatibility info
Title | Single Stripe - Black - 6mm - 10m Length |
Additional Information
- Outside sticker
- Ideal for Bikes, Vans, Caravans, Trucks, Buses etc
- Transforms the look of your car
- It is Self Adhesive and will stick to any flat, dry surface
- Length 10m approx
- 6mm thick single auto styling vinyl strip
Important compatibility info
Title | Single Stripe - Red - 6mm - 10m Length |
Additional Information
- Outside sticker
- Ideal for Bikes, Vans, Caravans, Trucks, Buses etc
- Transforms the look of your car
- It is Self Adhesive and will stick to any flat, dry surface
- Length 10m approx
- 6mm thick single auto styling vinyl strip
Important compatibility info
Title | Single Stripe - Silver - 6mm - 10m Length |
Additional Information
- Outside sticker
- Ideal for Bikes, Vans, Caravans, Trucks, Buses etc
- Transforms the look of your car
- It is Self Adhesive and will stick to any flat, dry surface
- Length 10m approx
- 6mm thick single auto styling vinyl strip
Important compatibility info
Title | Single Stripe - White - 6mm - 10m Length |
Additional Information
- Outside sticker
- Ideal for Bikes, Vans, Caravans, Trucks, Buses etc
- Transforms the look of your car
- It is Self Adhesive and will stick to any flat, dry surface
- Length 10m approx
- 6mm thick single auto styling vinyl strip
Important compatibility info
Inner diameter | 25 mm |
Function | Gasket, EGR valve |
Type | Gasket, EGR valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Screw length below head | 18 mm |
Function | Screw Plug, oil sump |
Type | Screw Plug, oil sump |
Material | Steel |
Thread Length | 18 mm |
Bolt Head/Nut Design | Female Torx |
Quality/ Grade | 5.8 |
Surface | Zinc-coated |
Spanner Size | T45 |
Additional Information 2 | with seal ring |
Outer diameter | 26 mm |
Length | 29 mm |
External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Screw length below head | 18 mm |
Function | Screw Plug, oil sump |
Type | Screw Plug, oil sump |
Material | Steel |
Thread Length | 18 mm |
Bolt Head/Nut Design | Female Torx |
Quality/ Grade | 5.8 |
Surface | Zinc-coated |
Spanner Size | T45 |
Additional Information 2 | with seal ring |
Outer diameter | 26 mm |
Length | 29 mm |
External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle, Front Axle |
Material | Steel |
Inner diameter | 79 mm |
Number of Teeth, ABS ring | 48 |
Type | Sensor Ring, ABS |
Function | Sensor Ring, ABS |
Height | 13 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle, Front Axle |
Material | Steel |
Inner diameter | 79 mm |
Number of Teeth, ABS ring | 48 |
Type | Sensor Ring, ABS |
Function | Sensor Ring, ABS |
Height | 13 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 46 mm |
Width | 50 mm |
Thickness | 53 mm |
Inner diameter | 30 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 46 mm |
Width | 50 mm |
Thickness | 53 mm |
Inner diameter | 30 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bolt Head/Nut Design | Male Star |
Quality/ Grade | 8.8 |
Placement on Vehicle | Front Axle, Rear Axle |
Function | Axle Bolt, drive shaft |
Screw length below head | 70 mm |
Spanner Size | 24 |
External Thread Size | M16 x 1,5 |
Type | Axle Bolt, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Filter |
Thread Size | M 20 X 1.5 |
Height | 74 mm |
Inner diameter 1 | 63 mm |
Outer diameter | 69 mm |
Type | Oil Filter |
Filter type | Spin-on Filter |
Inner diameter 2 | 55 mm |
Important compatibility info
Function | Oil Filter |
Thread Size | M 20 X 1.5 |
Height | 74 mm |
Inner diameter 1 | 63 mm |
Outer diameter | 69 mm |
Type | Oil Filter |
Filter type | Spin-on Filter |
Inner diameter 2 | 55 mm |
Important compatibility info
Outer diameter | 77 mm |
Height | 67 mm |
Thread Size | 3/4-16 UNF-2B |
Function | Oil Filter |
Inner diameter 1 | 71 mm |
Filter type | Spin-on Filter |
Type | Oil Filter |
Inner diameter 2 | 62 mm |
Important compatibility info
Outer diameter | 77 mm |
Height | 67 mm |
Thread Size | 3/4-16 UNF-2B |
Function | Oil Filter |
Inner diameter 1 | 71 mm |
Filter type | Spin-on Filter |
Type | Oil Filter |
Inner diameter 2 | 62 mm |
Important compatibility info
Function | Thermostat, coolant |
Height | 22 mm |
Diameter | 54 mm |
Height 1 | 22 mm |
Height 2 | 43 mm |
Opening Temperature | 82 °C |
Additional Information | with gaskets/seals |
Type | Thermostat, coolant |
for OE number | 1338030 |
Number of Seals | 7 |
Important compatibility info
Function | Thermostat, coolant |
Height | 22 mm |
Diameter | 54 mm |
Height 1 | 22 mm |
Height 2 | 43 mm |
Opening Temperature | 82 °C |
Additional Information | with gaskets/seals |
Type | Thermostat, coolant |
for OE number | 1338030 |
Number of Seals | 7 |
Important compatibility info
Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Diameter | 10 mm. 46 mm |
Placement on Vehicle | Rear, Upper, Front Axle Left, Front Axle Right |
Paired article numbers | AST8201 |
Important compatibility info
Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Diameter | 10 mm. 46 mm |
Placement on Vehicle | Rear, Upper, Front Axle Left, Front Axle Right |
Paired article numbers | AST8201 |
Important compatibility info
Placement on Vehicle | Rear Axle, Front Axle |
Length | 27 mm |
Material | Steel |
Spanner Size | 19 |
Surface | Zinc-coated |
Bolt Head/Nut Design | External Hexagon |
Quality/ Grade | 8 |
Type | Wheel Nut |
Wheel Fastening | Ball seat A/G |
Function | Wheel Nut |
Internal Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle, Front Axle |
Length | 27 mm |
Material | Steel |
Spanner Size | 19 |
Surface | Zinc-coated |
Bolt Head/Nut Design | External Hexagon |
Quality/ Grade | 8 |
Type | Wheel Nut |
Wheel Fastening | Ball seat A/G |
Function | Wheel Nut |
Internal Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Material | Rubber |
Inner diameter | 21 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Material | Rubber |
Inner diameter | 21 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | In-Line Filter |
Function | Fuel filter |
Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | In-Line Filter |
Function | Fuel filter |
Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Material | Rubber |
Inner diameter | 13 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Material | Rubber |
Inner diameter | 13 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Replaces | BFO4217 |
Outer diameter | 68 mm |
Additional Information 2 | with one anti-return valve |
Thread Size | M 20X1.5 |
Filter type | Spin-on Filter |
Valve type | Pressure Limiting Valve |
Function | Oil Filter |
Type | Oil Filter |
Height | 67 mm |
Important compatibility info
Replaces | BFO4217 |
Outer diameter | 68 mm |
Additional Information 2 | with one anti-return valve |
Thread Size | M 20X1.5 |
Filter type | Spin-on Filter |
Valve type | Pressure Limiting Valve |
Function | Oil Filter |
Type | Oil Filter |
Height | 67 mm |
Important compatibility info
Inner diameter | 12.2 mm |
Diameter | 33 mm |
Length | 48 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Paired article numbers | FSK6491 |
Important compatibility info
Inner diameter | 12.2 mm |
Diameter | 33 mm |
Length | 48 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Paired article numbers | FSK6491 |
Important compatibility info
Voltage | 12 V |
Combi Switch Function | Normally Open Contact |
Relay function | Normally open contact |
Type | Relay, fuel pump |
Function | Relay, fuel pump |
Replaces | 0332019110 |
Resistance | 80 Ohm |
Current Strength | 50 A |
Temperature range from | -40 °C |
Temperature range to | 100 °C |
Important compatibility info
Voltage | 12 V |
Combi Switch Function | Normally Open Contact |
Relay function | Normally open contact |
Type | Relay, fuel pump |
Function | Relay, fuel pump |
Replaces | 0332019110 |
Resistance | 80 Ohm |
Current Strength | 50 A |
Temperature range from | -40 °C |
Temperature range to | 100 °C |
Important compatibility info
Type | Bulb, direction indicator |
Rated Power | 21 W |
Voltage | 24 V |
Bulb Type | P21W |
Extra Description | ECO Truck WS |
Function | Bulb, direction indicator |
Base design light bulb | BA15s |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023