Important compatibility info
| Opening Pressure | 1.45 bar |
| Function | Cap, coolant tank |
| for OE number | 1 301 104 |
| Type | Cap, coolant tank |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Opening Pressure | 1.45 bar |
| Function | Cap, coolant tank |
| for OE number | 1 301 104 |
| Type | Cap, coolant tank |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Length | 55 mm |
| Quality/ Grade | 10.9 |
| Shaft Length | 21 mm |
| Length | 92 mm |
| Material | Steel |
| Placement on Vehicle | Front Axle, Rear Axle |
| Bolt Head Diameter | 32 mm |
| Surface | Phosphatized |
| External Thread Size | M22 x 1,5 |
| Function | Wheel Stud |
| Screw length below head | 81 mm |
| Type | Wheel Stud |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Length | 55 mm |
| Quality/ Grade | 10.9 |
| Shaft Length | 21 mm |
| Length | 92 mm |
| Material | Steel |
| Placement on Vehicle | Front Axle, Rear Axle |
| Bolt Head Diameter | 32 mm |
| Surface | Phosphatized |
| External Thread Size | M22 x 1,5 |
| Function | Wheel Stud |
| Screw length below head | 81 mm |
| Type | Wheel Stud |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Inner diameter | 26 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Inner diameter | 26 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Steel |
| Function | Wheel Nut |
| Wheel Fastening | Conical Seat F |
| Quality/ Grade | 8 |
| Bolt Head/Nut Design | External Hexagon |
| Surface | Zinc-coated |
| Spanner Size | 19 |
| Thickness | 30 mm |
| Outer diameter | 25 mm |
| Placement on Vehicle | Front Axle, Rear Axle |
| Internal Thread Size | M12 x 1,5 |
| Type | Wheel Nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Steel |
| Function | Wheel Nut |
| Wheel Fastening | Conical Seat F |
| Quality/ Grade | 8 |
| Bolt Head/Nut Design | External Hexagon |
| Surface | Zinc-coated |
| Spanner Size | 19 |
| Thickness | 30 mm |
| Outer diameter | 25 mm |
| Placement on Vehicle | Front Axle, Rear Axle |
| Internal Thread Size | M12 x 1,5 |
| Type | Wheel Nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Weight | 0.32 kg |
| Additional Information 2 | without cable |
| Thread Size | N/A |
| Number of Poles | 4 -pin connector |
| Spanner Size | 20 Diam. |
| Housing Colour | Black |
| Connector Shape | Rectangular |
| Function | Sensor, coolant temperature |
| Extra Description | Fuel Parts |
| Net weight | 0.026 kg |
| Type | Sensor, coolant temperature |
Important compatibility info
| Weight | 0.32 kg |
| Additional Information 2 | without cable |
| Thread Size | N/A |
| Number of Poles | 4 -pin connector |
| Spanner Size | 20 Diam. |
| Housing Colour | Black |
| Connector Shape | Rectangular |
| Function | Sensor, coolant temperature |
| Extra Description | Fuel Parts |
| Net weight | 0.026 kg |
| Type | Sensor, coolant temperature |
Important compatibility info
| Weight | 0.032 kg |
| Extra Description | Fuel Parts |
| Net weight | 0.026 kg |
| Thread Size | M12 x 1.5 |
| Number of Poles | 3 -pin connector |
| Spanner Size | 21 |
| Housing Colour | Blue |
| Connector Shape | Oval |
| Function | Sensor, coolant temperature |
| Type | Sensor, coolant temperature |
Important compatibility info
| Weight | 0.032 kg |
| Extra Description | Fuel Parts |
| Net weight | 0.026 kg |
| Thread Size | M12 x 1.5 |
| Number of Poles | 3 -pin connector |
| Spanner Size | 21 |
| Housing Colour | Blue |
| Connector Shape | Oval |
| Function | Sensor, coolant temperature |
| Type | Sensor, coolant temperature |
Important compatibility info
| Extra Description | Fuel Parts |
| Net weight | 0.022 kg |
| Additional Information 2 | without cable |
| Thread Size | M12 x 1.5 |
| Number of Poles | 3 -pin connector |
| Spanner Size | 21 |
| Housing Colour | Black |
| Connector Shape | Oval |
| Function | Sensor, coolant temperature |
| Weight | 0.028 kg |
| Type | Sensor, coolant temperature |
Important compatibility info
| Extra Description | Fuel Parts |
| Net weight | 0.022 kg |
| Additional Information 2 | without cable |
| Thread Size | M12 x 1.5 |
| Number of Poles | 3 -pin connector |
| Spanner Size | 21 |
| Housing Colour | Black |
| Connector Shape | Oval |
| Function | Sensor, coolant temperature |
| Weight | 0.028 kg |
| Type | Sensor, coolant temperature |
Important compatibility info
| Extra Description | Fuel Parts |
| Net weight | 0.016 kg |
| Housing Colour | Green |
| Connector Shape | Oval |
| Function | Sensor, coolant temperature |
| Spanner Size | 20 Diam. |
| Additional Information | with gaskets/seals |
| Thread Size | N/A |
| Number of Poles | 2 -pin connector |
| Weight | 0.022 kg |
| Type | Sensor, coolant temperature |
Important compatibility info
| Extra Description | Fuel Parts |
| Net weight | 0.016 kg |
| Housing Colour | Green |
| Connector Shape | Oval |
| Function | Sensor, coolant temperature |
| Spanner Size | 20 Diam. |
| Additional Information | with gaskets/seals |
| Thread Size | N/A |
| Number of Poles | 2 -pin connector |
| Weight | 0.022 kg |
| Type | Sensor, coolant temperature |
Important compatibility info
| Extra Description | Fuel Parts |
| Function | Sensor, coolant temperature |
| Connector Shape | Oval |
| Housing Colour | Black |
| Spanner Size | 21 |
| Number of Poles | 2 -pin connector |
| Thread Size | M12 x 1.5 |
| Weight | 0.04 kg |
| Type | Sensor, coolant temperature |
Important compatibility info
| Extra Description | Fuel Parts |
| Function | Sensor, coolant temperature |
| Connector Shape | Oval |
| Housing Colour | Black |
| Spanner Size | 21 |
| Number of Poles | 2 -pin connector |
| Thread Size | M12 x 1.5 |
| Weight | 0.04 kg |
| Type | Sensor, coolant temperature |
Important compatibility info
| Housing Colour | White |
| Connector Shape | Oval |
| Switch Pressure | 0.6 bar |
| Function | Oil Pressure Switch |
| Technical Information Number | Circuit N.C. |
| Thread Size | M14 x 1.5 |
| Number of Poles | 1 -pin connector |
| Spanner Size | 21 |
| Weight | 0.04 kg |
| Net weight | 0.034 kg |
| Type | Oil Pressure Switch |
Important compatibility info
| Housing Colour | White |
| Connector Shape | Oval |
| Switch Pressure | 0.6 bar |
| Function | Oil Pressure Switch |
| Technical Information Number | Circuit N.C. |
| Thread Size | M14 x 1.5 |
| Number of Poles | 1 -pin connector |
| Spanner Size | 21 |
| Weight | 0.04 kg |
| Net weight | 0.034 kg |
| Type | Oil Pressure Switch |
Important compatibility info
| Function | Gasket, exhaust pipe |
| Type | Gasket, exhaust pipe |
| Weight | 0 kg |
| Height | 0 mm |
| Width | 0 mm |
| Length | 0 mm |
Important compatibility info
| Function | Gasket, exhaust pipe |
| Type | Gasket, exhaust pipe |
| Weight | 0 kg |
| Height | 0 mm |
| Width | 0 mm |
| Length | 0 mm |
Important compatibility info
| Function | Oil Pressure Switch |
| Technical Information Number | Circuit N.O. |
| Type | Oil Pressure Switch |
| Thread Size | M10 x 1 |
| Number of Poles | 1 -pin connector |
| Spanner Size | 24 |
| Weight | 0.047 kg |
| Housing Colour | black |
| Connector Shape | rectangular |
| Net weight | 0.040 kg |
Important compatibility info
| Function | Oil Pressure Switch |
| Technical Information Number | Circuit N.O. |
| Type | Oil Pressure Switch |
| Thread Size | M10 x 1 |
| Number of Poles | 1 -pin connector |
| Spanner Size | 24 |
| Weight | 0.047 kg |
| Housing Colour | black |
| Connector Shape | rectangular |
| Net weight | 0.040 kg |
Important compatibility info
| Function | Oil Filter |
| Filter type | Filter Insert |
| Height | 156 mm |
| Outer diameter 1 | 64 mm |
| Inner diameter 2 | 26 mm |
| Type | Oil Filter |
| Inner diameter 1 | 26 mm |
Important compatibility info
| Function | Oil Filter |
| Filter type | Filter Insert |
| Height | 156 mm |
| Outer diameter 1 | 64 mm |
| Inner diameter 2 | 26 mm |
| Type | Oil Filter |
| Inner diameter 1 | 26 mm |
Important compatibility info
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
| Paired article numbers | NST8301 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| for OE number | 350161 |
Important compatibility info
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
| Paired article numbers | NST8301 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| for OE number | 350161 |
Important compatibility info
| Title | OSRAM BETTER SIGHT Wipers |
Additional Information
OSRAM WIPERblades BETTER SIGHT - Conventional Blades
Premium Universal Wiper Blades for Streak-Free Windscreen Clarity
Meet the ultimate all-weather WIPERblade BETTER SIGHT Conventional Wiper Blades from OSRAM designed to keep your windscreen clear, quiet and streak-free in every season. Each blade features third-generation Nano-Tech composite rubber, which stays flexible from freezing mornings to scorching afternoons, delivering a crisp, even wipe that leaves no trace behind. A high-carbon steel flexor inlay hugs curved glass, applying consistent pressure across the entire sweep, for uniform clarity on every pass.
The full stainless-steel frame is vented and finished with an integrated spoiler that cuts through oncoming airflow, preventing wind lift and damping noise for whisper-quiet performance even at motorway speeds. Installation is equally refined: OSRAM’s multi-fit universal clip snaps onto the five most common wiper-arm types without tools, covering the vast majority of European vehicles and getting you back on the road in seconds.
For over 110 years, OSRAM has been a trusted name in automotive lighting and innovation. That legacy of quality and reliability lives on in OSRAM WIPERblade BETTER SIGHT Conventional Blades premium multi-fit windshield wipers engineered to keep your windshield clear when it matters most.
- Streak-Free Cleaning
- Silent Working
- No Tools Required
- NANO-TECH
- STAINLESS STEEL CONSTRUCTION
- Vented design
Important compatibility info
| Title | OSRAM BETTER SIGHT Wipers |
Additional Information
OSRAM WIPERblades BETTER SIGHT - Conventional Blades
Premium Universal Wiper Blades for Streak-Free Windscreen Clarity
Meet the ultimate all-weather WIPERblade BETTER SIGHT Conventional Wiper Blades from OSRAM designed to keep your windscreen clear, quiet and streak-free in every season. Each blade features third-generation Nano-Tech composite rubber, which stays flexible from freezing mornings to scorching afternoons, delivering a crisp, even wipe that leaves no trace behind. A high-carbon steel flexor inlay hugs curved glass, applying consistent pressure across the entire sweep, for uniform clarity on every pass.
The full stainless-steel frame is vented and finished with an integrated spoiler that cuts through oncoming airflow, preventing wind lift and damping noise for whisper-quiet performance even at motorway speeds. Installation is equally refined: OSRAM’s multi-fit universal clip snaps onto the five most common wiper-arm types without tools, covering the vast majority of European vehicles and getting you back on the road in seconds.
For over 110 years, OSRAM has been a trusted name in automotive lighting and innovation. That legacy of quality and reliability lives on in OSRAM WIPERblade BETTER SIGHT Conventional Blades premium multi-fit windshield wipers engineered to keep your windshield clear when it matters most.
- Streak-Free Cleaning
- Silent Working
- No Tools Required
- NANO-TECH
- STAINLESS STEEL CONSTRUCTION
- Vented design
Important compatibility info
| Voltage | 12 V |
| Bulb Type | W5W |
| Rated Power | 5 W |
| Type | Bulb, park/position light |
| Function | Bulb, park/position light |
| Base design light bulb | W2.1x9.5d |
| Packing Type | Box |
Important compatibility info
| Voltage | 12 V |
| Bulb Type | W5W |
| Rated Power | 5 W |
| Type | Bulb, park/position light |
| Function | Bulb, park/position light |
| Base design light bulb | W2.1x9.5d |
| Packing Type | Box |
Important compatibility info
| Height | 66 mm |
| Max. Length | 83.5 mm |
| Function | Fuel filter |
| Outlet Diameter | 8 mm |
| Type | Fuel filter |
| Outer diameter | 44 mm |
| Filter type | Filter Insert |
| Inlet Diameter | 8 mm |
| Outer diameter 1 | 50 mm |
Important compatibility info
| Height | 66 mm |
| Max. Length | 83.5 mm |
| Function | Fuel filter |
| Outlet Diameter | 8 mm |
| Type | Fuel filter |
| Outer diameter | 44 mm |
| Filter type | Filter Insert |
| Inlet Diameter | 8 mm |
| Outer diameter 1 | 50 mm |
Important compatibility info
| Type | Filter, cabin air |
| EU Product Safety Regulation (GPSR) | IEC 60417-6183 mechanical expertise required |
| Height | 19 mm |
| Width | 202 mm |
| Function | Filter, cabin air |
| Filter type | Particulate Filter |
| Length | 242 mm |
Important compatibility info
| Type | Filter, cabin air |
| EU Product Safety Regulation (GPSR) | IEC 60417-6183 mechanical expertise required |
| Height | 19 mm |
| Width | 202 mm |
| Function | Filter, cabin air |
| Filter type | Particulate Filter |
| Length | 242 mm |
Important compatibility info
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
| Diameter | 19 mm |
| Model | 9-3 SIGNUM VECTRA |
| Manufacturer | SAAB VAUXHALL |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Paired article numbers | AST8030 |
Important compatibility info
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
| Diameter | 19 mm |
| Model | 9-3 SIGNUM VECTRA |
| Manufacturer | SAAB VAUXHALL |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Paired article numbers | AST8030 |
Important compatibility info
| Function | Gasket, intake manifold |
| Type | Gasket, intake manifold |
Important compatibility info
| Function | Gasket, intake manifold |
| Type | Gasket, intake manifold |
Important compatibility info
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Important compatibility info
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Important compatibility info
| Valve type | for inlet valves, for exhaust valves |
| Function | Valve Guide |
| Outer diameter 1 | 11.1 mm |
| Length | 36 mm |
| Inner diameter | 6 mm |
| Type | Valve Guide |
Important compatibility info
| Valve type | for inlet valves, for exhaust valves |
| Function | Valve Guide |
| Outer diameter 1 | 11.1 mm |
| Length | 36 mm |
| Inner diameter | 6 mm |
| Type | Valve Guide |
Important compatibility info
| Length | 38 mm |
| Width | 41 mm |
| Placement on Vehicle | Front Axle |
| Function | Mounting, stabiliser bar |
| Inner diameter | 24 mm |
| Thickness | 41 mm |
| Material | Rubber, Rubber with fabric lining |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 38 mm |
| Width | 41 mm |
| Placement on Vehicle | Front Axle |
| Function | Mounting, stabiliser bar |
| Inner diameter | 24 mm |
| Thickness | 41 mm |
| Material | Rubber, Rubber with fabric lining |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber |
| Outer diameter | 41 mm |
| Inner diameter | 20 mm |
| Type | Bushing, leaf spring |
| Function | Bushing, leaf spring |
| Length | 53 mm |
| Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right, Upper, inner, outer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber |
| Outer diameter | 41 mm |
| Inner diameter | 20 mm |
| Type | Bushing, leaf spring |
| Function | Bushing, leaf spring |
| Length | 53 mm |
| Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right, Upper, inner, outer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 12 mm |
| Quantity | 1 |
| Diameter From | 50 mm |
| Diameter To | 70 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
Important compatibility info
| Length | 44 mm |
| Width | 48 mm |
| Function | Mounting, stabiliser bar |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber |
| Outer diameter | 44 mm |
| Thickness | 52 mm |
| Inner diameter | 22 mm |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

























