Important compatibility info
| Opening Temperature | 83 °C |
| Heating / Cooling | with vent hole |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (22310)
- 1x Febi Gasket, water pump (03505)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | Steel |
| Outer diameter | 188 mm |
| Inner diameter | 160 mm |
| Number of Teeth, ABS ring | 80 |
| Function | Sensor Ring, ABS |
| Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, transmission sided |
| Length | 126 mm |
| Material | Thermoplast |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 76 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (29821)
- 1x Febi Clamping Clip (45642)
- 2x Febi Molybdenum Grease (02582)
Important compatibility info
| Function | Gasket, oil sump |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1376 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 11998 |
| Placement on Vehicle | Front Axle Left |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M12 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, oil sump |
| Material | Rubber/Metal |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Colour | Black |
| Number of Connectors / Ports | 2 |
| Function | Sensor, intake air temperature |
| Type | Sensor, intake air temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Outer |
| Inner diameter | 246 mm |
| Mounting bores distance | 164 mm |
| Mounting points diameter | 11 mm |
| Function | Fixing Strap, compressed-air tank |
| Type | Fixing Strap, compressed-air tank |
| Material | Sheet Steel |
| Colour | black |
| Bolt Head/Nut Design | External Hexagon |
| External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Oil Jet, piston underside cooling |
| Function | Oil Jet, piston underside cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Type | Roller Guide, sliding door |
| Function | Roller Guide, sliding door |
| Paired article numbers | 180303 |
| Placement on Vehicle | Upper Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 198 mm |
| Height | 20 mm |
| Width | 128.5 mm |
| Type | Air Filter, traction battery casing |
| Function | Air Filter, traction battery casing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 100.6 mm |
| Notches / Holes Number | 3 |
| Function | Intake Valve |
| Type | Intake Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Ball Joint |
| Cone Size | 21 mm |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| External Thread Size | M14 x 1,5 |
| Type | Ball Joint |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 2 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Steering arm type | for control arm |
| Cone Size | 11.5 mm |
| Type | Ball Joint |
| Function | Ball Joint |
| Extra Description | ProKit |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 63 mm |
| Function | Bushing, axle beam |
| Inner diameter | 12 mm |
| Material | Rubber/Metal |
| Thickness | 75 mm |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 37 mm |
| Outer diameter | 64 mm |
| Inner diameter | 34 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information | with Split Pin, with axle nut, with retaining rings |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 18 mm |
| Filter type | Filter Insert |
| Height | 137 mm |
| Function | Hydraulic Filter, automatic transmission |
| Additional Information 2 | with seal ring |
| Outer diameter | 58 mm |
| Type | Hydraulic Filter, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 540 mm |
| Housing Diameter | 19 mm |
| Eject Force | 400 N |
| Stroke | 210 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 299.5 mm |
| Replaces | 24325 |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 197 mm |
| Function | Inner Tie Rod |
| Type | Inner Tie Rod |
| External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 210 mm |
| Material | Steel |
| Outer diameter | 15 mm. 40 mm |
| Thickness | 70.5 mm |
| Spanner Size | 19 |
| Colour | Grey |
| Thread Length | 19 mm. 70 mm |
| Thread Type | with right-hand thread |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,5, M16 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front, Front Axle Right |
| Length | 84 mm. 50.5 mm |
| Material | Aluminium |
| Outer diameter | 65 mm |
| Inner diameter | 14 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 140 mm |
| Thickness | 109 mm |
| Spanner Size | 19 |
| Function | Tie Rod End |
| Additional Information | with lock nut |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Internal Thread Size | M12 x 1,5 |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 197162 |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 197161 |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, steering idler arm |
| Type | Repair Kit, steering idler arm |
| Replaces | 05114 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Nut (05054)
- 2x Febi Bush, steering arm shaft (05884)
- 1x Febi Washer (05885)
- 1x Febi Sealing Cover, steering arm shaft (05887)
- 1x Febi Screw (05888)
Important compatibility info
| Height | 41 mm |
| Width | 110 mm |
| Voltage | 24 V |
| Inspection Tag | ADR |
| Colour | Orange |
| Number of Connectors / Ports | 2 |
| Light Design | LED |
| Cable Length | 280 mm |
| Depth | 25 mm |
| Protection Type (IP Code) | IP67 |
| Type | Side Marker Light |
| Fulfils ECE norm | R10, R148, R150 |
| Temperature range from | -30 °C |
| Temperature range to | 60 °C |
| Function | Side Marker Light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter 1 | 42 mm |
| Cone Size | 20 mm |
| Type | Ball Joint |
| Function | Ball Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 205 mm |
| Material | Thermoplastic polyester elastomer |
| Additional Information 2 | with clamps |
| Inner diameter 1 | 19 mm |
| Inner diameter 2 | 57 mm |
| Type | Bellow Kit, steering |
| Function | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 341.6 mm |
| Function | Inner Tie Rod |
| Internal Thread Size | M22 x 1,5 |
| Additional Information | with counter nut |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5 |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Paired article numbers | 01522 |
| Cone Size | 17 mm |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 01521 |
| Placement on Vehicle | Front Axle Right, Lower |
| Function | Ball Joint |
| Cone Size | 17 mm |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Voltage | 12 V |
| Function | Washer Fluid Pump, window cleaning |
| Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 92 mm |
| Outer diameter | 92 mm |
| Length | 92 mm |
| Height | 120 mm |
| Filter type | In-Line Filter, with water drain screw |
| Pipe Diameter | 10 mm |
| Function | Fuel filter |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rod/Strut | Coupling Rod |
| Length | 87 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,5 |
| Spanner Size | 15, 16 |
| Additional Information 2 | with bolts/screws |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 257 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Inner Tie Rod |
| External Thread Size | M14 x 1,5, M12 x 1 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Hose, crankcase ventilation |
| Placement on Vehicle | Upper |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Voltage | 12 V |
| Colour | Black |
| Number of Connectors / Ports | 8 |
| Combi Switch Function | with wipe-wash function, with rear wipe-wash function, with wipe interval function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle |
| Shape/Form | Round |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 66 mm |
| Material | Rubber |
| Outer diameter | 66 mm |
| Inner diameter | 15 mm |
| Thickness | 32 mm |
| Placement on Vehicle | Rear Axle, Rear |
| Function | Mounting, differential |
| Type | Mounting, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 32 mm |
| Outer diameter | 66 mm |
| Inner diameter | 35 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with nut, with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (22004)
- 1x Febi Nut, kingpin (18195)
- 1x Febi Circlip (22005)
Important compatibility info
| Placement on Vehicle | Wheel Side, Rear Axle |
| Material | Rubber |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 51 mm |
| Inner diameter 1 | 31 mm |
| Type | Bellow Kit, drive shaft |
| Length | 78 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (36555)
- 2x Febi High Temperature Lubricant (03630)
Important compatibility info
| Function | Sensor Ring, ABS |
| Outer diameter | 212 mm |
| Thickness | 18 mm |
| Inner diameter | 169 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Teeth, ABS ring | 100 |
| Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 222 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M8 x 1,25 |
| Type | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 168 mm |
| Additional Information 2 | with seal ring |
| Bolt Head/Nut Design | External Hexagon |
| Tightening Torque | 25 Nm |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Thread Type | with right-hand thread |
| Thread Length | 48.3 mm |
| Rod/Strut | Coupling Rod |
| Spanner Size | 19 |
| Thickness | 80 mm |
| Outer diameter | 9 mm |
| Material | Steel |
| Length | 132 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,75 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | V-Ribbed Belt |
| Length | 1560 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Diameter 1 | 37 mm |
| Diameter 2 | 15 mm |
| Function | Gasket, water pump |
| Type | Gasket, water pump |
| Replaces | 09987 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 96 mm |
| Outer diameter | 97 mm |
| Filter type | Spin-on Filter |
| Type | Oil Filter |
| Function | Oil Filter |
| Gasket outer diameter | 71.7 mm |
| Gasket inner diameter | 62.3 mm |
| Internal Thread Size | M27 x 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































