Important compatibility info
| Manufacturer | OPEL VAUXHALL |
| Length 1 | 1378 mm |
| Model | COMBO CORSA TIGRA |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
| Placement on Vehicle | Left Rear |
Important compatibility info
| Manufacturer | OPEL VAUXHALL |
| Length 1 | 1378 mm |
| Model | COMBO CORSA TIGRA |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
| Placement on Vehicle | Left Rear |
Important compatibility info
| Function | Guide Sleeve Kit, brake caliper |
| Model | MURANO NAVARA PATHFINDER QASHQAI |
| Manufacturer | NISSAN |
| Type | Guide Sleeve Kit, brake caliper |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
Important compatibility info
| Type | Coolant Flange |
| Function | Coolant Flange |
| for OE number | 25631-2B051 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Coolant Flange |
| Function | Coolant Flange |
| for OE number | 25631-2B051 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Clutch Release Bearing |
| Type | Clutch Release Bearing |
| for OE number | MN171419 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Clutch Release Bearing |
| Type | Clutch Release Bearing |
| for OE number | MN171419 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Filter type | Pollen Filter |
| Length | 236 mm |
| Height | 22 mm |
| Width | 101 mm |
| Function | Filter Set, cabin air |
| Type | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Filter type | Pollen Filter |
| Length | 236 mm |
| Height | 22 mm |
| Width | 101 mm |
| Function | Filter Set, cabin air |
| Type | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rod/Strut | Coupling Rod |
| Length | 186 mm |
| External Thread Size | M10 x 1,25 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Link/Coupling Rod, stabiliser bar |
| Colour | Black |
| Spanner Size | 17 |
| Material | Steel |
| Type | Link/Coupling Rod, stabiliser bar |
| Replaces | ADM58516C; ADM58521C |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rod/Strut | Coupling Rod |
| Length | 186 mm |
| External Thread Size | M10 x 1,25 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Link/Coupling Rod, stabiliser bar |
| Colour | Black |
| Spanner Size | 17 |
| Material | Steel |
| Type | Link/Coupling Rod, stabiliser bar |
| Replaces | ADM58516C; ADM58521C |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Oil Filter |
| Filter type | Filter Insert |
| Outer diameter | 91 mm |
| Height | 124 mm |
| Type | Oil Filter |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Oil Filter |
| Filter type | Filter Insert |
| Outer diameter | 91 mm |
| Height | 124 mm |
| Type | Oil Filter |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| To be used with part number(s) | BM11045H, BM11045HP |
| Function | Mounting Kit, soot/particulate filter |
| Type | Mounting Kit, soot/particulate filter |
Important compatibility info
| To be used with part number(s) | BM11045H, BM11045HP |
| Function | Mounting Kit, soot/particulate filter |
| Type | Mounting Kit, soot/particulate filter |
Important compatibility info
| Placement on Vehicle | Centre |
| To be used with part number(s) | BM50529 |
| Function | Mounting Kit, exhaust pipe |
| Type | Mounting Kit, exhaust pipe |
Important compatibility info
| Placement on Vehicle | Centre |
| To be used with part number(s) | BM50529 |
| Function | Mounting Kit, exhaust pipe |
| Type | Mounting Kit, exhaust pipe |
Important compatibility info
| To be used with part number(s) | BM70162 |
| Function | Mounting Kit, exhaust pipe |
| Type | Mounting Kit, exhaust pipe |
| Placement on Vehicle | Front |
Important compatibility info
| To be used with part number(s) | BM70162 |
| Function | Mounting Kit, exhaust pipe |
| Type | Mounting Kit, exhaust pipe |
| Placement on Vehicle | Front |
Important compatibility info
| To be used with part number(s) | BM90466 |
| Function | Mounting Kit, catalytic converter |
| Type | Mounting Kit, catalytic converter |
Important compatibility info
| To be used with part number(s) | BM90466 |
| Function | Mounting Kit, catalytic converter |
| Type | Mounting Kit, catalytic converter |
Important compatibility info
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Upper Right |
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Upper Right |
Important compatibility info
| Height | 122 mm |
| Outer diameter | 92 mm |
| Filter type | Filter Insert |
| Inner diameter 1 | 35 mm |
| Inner diameter 2 | 34 mm |
| Function | Oil Filter |
| Type | Oil Filter |
Important compatibility info
| Height | 122 mm |
| Outer diameter | 92 mm |
| Filter type | Filter Insert |
| Inner diameter 1 | 35 mm |
| Inner diameter 2 | 34 mm |
| Function | Oil Filter |
| Type | Oil Filter |
Important compatibility info
| Inner diameter | 12.2 mm |
| Diameter | 39.6 mm |
| Length | 52 mm |
| Function | Mounting, control/trailing arm |
| Placement on Vehicle | Rear Axle, Left, Right, inner, Upper |
| Type | Mounting, control/trailing arm |
| Paired article numbers | FSK7995 |
Important compatibility info
| Inner diameter | 12.2 mm |
| Diameter | 39.6 mm |
| Length | 52 mm |
| Function | Mounting, control/trailing arm |
| Placement on Vehicle | Rear Axle, Left, Right, inner, Upper |
| Type | Mounting, control/trailing arm |
| Paired article numbers | FSK7995 |
Important compatibility info
| Inner diameter | 14.2 mm |
| Diameter | 39.6 mm |
| Length | 54 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Paired article numbers | FSK7996 |
| Placement on Vehicle | Rear Axle, Left, Right, outer, Upper |
Important compatibility info
| Inner diameter | 14.2 mm |
| Diameter | 39.6 mm |
| Length | 54 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Paired article numbers | FSK7996 |
| Placement on Vehicle | Rear Axle, Left, Right, outer, Upper |
Important compatibility info
| Type | Sensor, boost pressure |
| Function | Sensor, boost pressure |
Important compatibility info
| Type | Sensor, boost pressure |
| Function | Sensor, boost pressure |
Important compatibility info
| Type | Signal Horn |
| Diameter | 112 mm |
| Operating Mode | Electric |
| Rated Voltage | 24 V |
| Number of Connectors / Ports | 2 |
| Position / Degree | vertikal ° |
| Power Consumption | 50 W |
| Sound Level | 110 dB(A) |
| Signal | Low Tone |
| Replaces | 0320146101 |
| Width | 60 mm |
| Function | Signal Horn |
Important compatibility info
| Length | 231 mm |
| Height | 42.3 mm |
| Width | 144.5 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
| Quantity | 1 |
Important compatibility info
| Length | 231 mm |
| Height | 42.3 mm |
| Width | 144.5 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
| Quantity | 1 |
Important compatibility info
| Placement on Vehicle | frontal sided |
| Material | FPM (fluoride rubber)/ACM (polyacrylate rubber) |
| Inner diameter 1 | 60 mm |
| Height 1 | 7 mm |
| Outer diameter 1 | 75 mm |
| Swirl Type | Right-hand Twist |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
Important compatibility info
| Placement on Vehicle | frontal sided |
| Material | FPM (fluoride rubber)/ACM (polyacrylate rubber) |
| Inner diameter 1 | 60 mm |
| Height 1 | 7 mm |
| Outer diameter 1 | 75 mm |
| Swirl Type | Right-hand Twist |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 82 mm |
| Thickness | 46 mm |
| Inner diameter | 12.2 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 82 mm |
| Thickness | 46 mm |
| Inner diameter | 12.2 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Air Filter |
| Type | Air Filter |
| Filter type | Filter Insert |
| Width | 144 mm |
| Height | 42 mm |
| Length | 344 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Air Filter |
| Type | Air Filter |
| Filter type | Filter Insert |
| Width | 144 mm |
| Height | 42 mm |
| Length | 344 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Steel |
| Outer diameter | 84 mm |
| Inner diameter | 81 mm |
| Number of Teeth, ABS ring | 96 |
| Type | Sensor Ring, ABS |
| Function | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Steel |
| Outer diameter | 84 mm |
| Inner diameter | 81 mm |
| Number of Teeth, ABS ring | 96 |
| Type | Sensor Ring, ABS |
| Function | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information | with lock nut |
| Spanner Size | 19 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,75 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information | with lock nut |
| Spanner Size | 19 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,75 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Coolant Flange |
| Type | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Coolant Flange |
| Type | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| External Thread Size | M14 x 1,5 |
| Spanner Size | 36 |
| Outer diameter | 40 mm |
| Additional Information | with counter nut |
| Length | 230 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| External Thread Size | M14 x 1,5 |
| Spanner Size | 36 |
| Outer diameter | 40 mm |
| Additional Information | with counter nut |
| Length | 230 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

























