Proud to be a UK-based company
Contact usAbrasive Discs & Brushes
Tools Sub-Categories
invoice Page 1 of 9
Results 1 - 10 of 87
Part number: WLD00184
Important compatibility info
| Title | Zirconium Flap Disc - 115mm - 60 Grit |
Additional Information
- Ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings
- Comply with European safety standards No. EN 13743
- Zirconium oxide flap disc for use with most metals, including stainless steel
ONLY
£5.59
£5.59
Part number: WLD00183
Important compatibility info
| Title | Zirconium Flap Disc - 115mm - 40 Grit |
Additional Information
- Ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings
- Comply with European safety standards No. EN 13743
- Zirconium oxide flap disc for use with most metals, including stainless steel
ONLY
£5.59
£5.59
Part number: WLD00182
Important compatibility info
| Title | Thin Metal Cutting Disc - 4.5in. x 1.0mm |
Additional Information
- Extra durability
- High cutting speed
- 4.5in. (115mm) cutting disc for metal
ONLY
£3.90
£3.90
Part number: 91488
Important compatibility info
| Title | Stripe Off Disc With Shank - 6mm |
Additional Information
- Time saver
- For removing stripes, decals, stickers and moulding adhesive
- Max 4000 rpm
- With 6mm shank
- Rubber erasure wheel
ONLY
£10.42
£10.42
Part number: 91450
Important compatibility info
Additional Information
- Time saver
- Precision ground file gives uniform results
- The Coarse is ideal for removing sags and runs on primer or top coat
- Fine pattern removes tiny imperfections
- The Fine easily removes dirt and paint runs from finished paint surfaces
ONLY
£11.39
£11.39
Part number: 66623303783
Important compatibility info
| Title | Stripping Disc - Blaze - Depressed Centre - 115mm |
Additional Information
However well you look after your car, there will always be one or two small dents or scratches in the bodywork. These may have been caused by flying stones, minor accidents or rusting. In order to repair these you will need to sand back and blend in the damage in preparation for re-spraying. To make sure you are using the best quality sanding products choose one from the Saint Gobain Abrasives range, Norton. As part of this range they supply a selection of stripping discs for rapid stripping of all coatings. They are a 3D open web structure, prevents clogging & loading with ceramic grain technology. The disc is 115mm in diameter and has a 22mm bore. Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; Bonded Abrasives, Coated Abrasives, and Diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people. Norton is a brand with an exceptional heritage and an excellent brand image. It offers a very complete collection of high performance and high value abrasives for use in all industrial markets, in addition to a merchandising line of pre-packaged abrasives, ideal for Distribution & DIY markets.
- Reduces damage to substrate
- For rapid stripping of all coatings
- Blaze SG Ceramic grain technology
- 3D open web structure, prevents clogging & loading
- 22mm bore
- 115mm diameter
ONLY
£13.51
£13.51
Part number: 3152
Important compatibility info
| Material | Steel |
| Diameter 1 | 75 mm |
| Colour | black |
| Type | Brush Disc, drill |
| Function | Brush Disc, drill |
| Wheel Material | Nylon |
Additional Information
General Information
Abrasive Wheel with Quick Chuck - 75mm Abrasive Wheel with Quick Chuck - 75mm.
- Maximum 4500 rpm
- Allows speedy switch from drill to driver
- For use with Laser's quick change facility for speedy switch from drill to driver
ONLY
£14.29
£14.29
Part number: 3151
Important compatibility info
| Material | Steel |
| Type | Brush Disc, drill |
| RPM to | 4.500 1/min |
| Function | Brush Disc, drill |
| Wheel Diameter | 50 mm |
| Wheel Material | Textile |
Additional Information
General Information
Buffing Wheel with Quick Chuck - 50mm Buffing Wheel with Quick Chuck - 50mm.
- Maximum 4500 rpm
- Allows speedy switch from drill to driver
- For use with Laser's quick change facility for speedy switch from drill to driver
ONLY
£13.80
£13.80
Part number: 3150
Important compatibility info
| Function | Brush Disc, drill |
| Type | Brush Disc, drill |
| Brush Head Shape | Long |
| Diameter 1 | 13 mm |
| Bristle Material | Steel |
| Material | Steel |
Additional Information
General Information
Tube Brush with Quick Chuck - 13mm Tube Brush with Quick Chuck - 13mm.
- Consumable
- Time saver
- Robust Steel brush
- For use with Laser's quick change facility for speedy switch from drill to driver
ONLY
£9.94
£9.94
Part number: 3149
Important compatibility info
| Material | Steel |
| Diameter 1 | 15 mm |
| Surface | Brass-plated |
| Type | Brush Disc, drill |
| Function | Brush Disc, drill |
| Bristle Material | Steel |
| Brush Head Shape | Cylindrical |
Additional Information
General Information
End Brush With Quick Chuck - 15mm End Brush With Quick Chuck - 15mm.
- Robust Steel brush with moveable rim to shorten brush
- Time saver
- Speedy switch from drill to driver
- For use with Laser's quick change facility for speedy switch from drill to driver
ONLY
£9.58
£9.58
Page 1 of 9
Abrasive Discs & Brushes
