Proud to be a UK-based company
Contact usAbrasive Discs & Brushes
Tools Sub-Categories
invoice Page 1 of 3
Results 1 - 30 of 88
Part number: WLD00184
Important compatibility info
| Title | Zirconium Flap Disc - 115mm - 60 Grit |
Additional Information
- Ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings
- Comply with European safety standards No. EN 13743
- Zirconium oxide flap disc for use with most metals, including stainless steel
ONLY
£5.59
£5.59
Part number: WLD00183
Important compatibility info
| Title | Zirconium Flap Disc - 115mm - 40 Grit |
Additional Information
- Ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings
- Comply with European safety standards No. EN 13743
- Zirconium oxide flap disc for use with most metals, including stainless steel
ONLY
£5.59
£5.59
Part number: WLD00182
Important compatibility info
| Title | Thin Metal Cutting Disc - 4.5in. x 1.0mm |
Additional Information
- Extra durability
- High cutting speed
- 4.5in. (115mm) cutting disc for metal
ONLY
£3.90
£3.90
Part number: WLD00181
Important compatibility info
| Title | Metal Grinding Disc - 4.5in. x 0.25in. |
Additional Information
- High cutting speed
- High stock removal
- 4.5in. (115mm) grinding disc for metal
ONLY
£4.26
£4.26
Part number: 91488
Important compatibility info
| Title | Stripe Off Disc With Shank - 6mm |
Additional Information
- Time saver
- For removing stripes, decals, stickers and moulding adhesive
- Max 4000 rpm
- With 6mm shank
- Rubber erasure wheel
ONLY
£10.42
£10.42
Part number: 91450
Important compatibility info
Additional Information
- Time saver
- Precision ground file gives uniform results
- The Coarse is ideal for removing sags and runs on primer or top coat
- Fine pattern removes tiny imperfections
- The Fine easily removes dirt and paint runs from finished paint surfaces
ONLY
£11.39
£11.39
Part number: 66623303783
Important compatibility info
| Title | Stripping Disc - Blaze - Depressed Centre - 115mm |
Additional Information
However well you look after your car, there will always be one or two small dents or scratches in the bodywork. These may have been caused by flying stones, minor accidents or rusting. In order to repair these you will need to sand back and blend in the damage in preparation for re-spraying. To make sure you are using the best quality sanding products choose one from the Saint Gobain Abrasives range, Norton. As part of this range they supply a selection of stripping discs for rapid stripping of all coatings. They are a 3D open web structure, prevents clogging & loading with ceramic grain technology. The disc is 115mm in diameter and has a 22mm bore. Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; Bonded Abrasives, Coated Abrasives, and Diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people. Norton is a brand with an exceptional heritage and an excellent brand image. It offers a very complete collection of high performance and high value abrasives for use in all industrial markets, in addition to a merchandising line of pre-packaged abrasives, ideal for Distribution & DIY markets.
- Reduces damage to substrate
- For rapid stripping of all coatings
- Blaze SG Ceramic grain technology
- 3D open web structure, prevents clogging & loading
- 22mm bore
- 115mm diameter
ONLY
£13.51
£13.51
Part number: 3152
Important compatibility info
| Material | Steel |
| Diameter 1 | 75 mm |
| Colour | black |
| Type | Brush Disc, drill |
| Function | Brush Disc, drill |
| Wheel Material | Nylon |
Additional Information
General Information
Abrasive Wheel with Quick Chuck - 75mm Abrasive Wheel with Quick Chuck - 75mm.
- Maximum 4500 rpm
- Allows speedy switch from drill to driver
- For use with Laser's quick change facility for speedy switch from drill to driver
ONLY
£14.29
£14.29
Part number: 3151
Important compatibility info
| Material | Steel |
| Type | Brush Disc, drill |
| RPM to | 4.500 1/min |
| Function | Brush Disc, drill |
| Wheel Diameter | 50 mm |
| Wheel Material | Textile |
Additional Information
General Information
Buffing Wheel with Quick Chuck - 50mm Buffing Wheel with Quick Chuck - 50mm.
- Maximum 4500 rpm
- Allows speedy switch from drill to driver
- For use with Laser's quick change facility for speedy switch from drill to driver
ONLY
£13.80
£13.80
Part number: 3150
Important compatibility info
| Function | Brush Disc, drill |
| Type | Brush Disc, drill |
| Brush Head Shape | Long |
| Diameter 1 | 13 mm |
| Bristle Material | Steel |
| Material | Steel |
Additional Information
General Information
Tube Brush with Quick Chuck - 13mm Tube Brush with Quick Chuck - 13mm.
- Consumable
- Time saver
- Robust Steel brush
- For use with Laser's quick change facility for speedy switch from drill to driver
ONLY
£9.94
£9.94
Part number: 3149
Important compatibility info
| Material | Steel |
| Diameter 1 | 15 mm |
| Surface | Brass-plated |
| Type | Brush Disc, drill |
| Function | Brush Disc, drill |
| Bristle Material | Steel |
| Brush Head Shape | Cylindrical |
Additional Information
General Information
End Brush With Quick Chuck - 15mm End Brush With Quick Chuck - 15mm.
- Robust Steel brush with moveable rim to shorten brush
- Time saver
- Speedy switch from drill to driver
- For use with Laser's quick change facility for speedy switch from drill to driver
ONLY
£9.58
£9.58
Part number: 3148
Important compatibility info
| Diameter 1 | 75 mm |
| Type | Brush Disc, drill |
| Material | Steel |
| Bristle Material | Steel |
| Title | Twist Knot Brush - Cup Type With Quick Chuck End - 75mm |
| Function | Brush Disc, drill |
| Bristle Type | knotted version |
| Brush Head Shape | Conical |
Additional Information
General Information
Twist Knot Cup Brush with QC End - 75mm Twist Knot Cup Brush with QC End - 75mm.
- Robust steel brush
- Time saver
- Speedy switch from drill to driver
- For use with Laser's quick change facility for speedy switch from drill to driver
ONLY
£28.92
£28.92
Part number: 3146
Important compatibility info
| Title | Wire Brush - Flat Type With Quick Chuck End - 75mm |
| Material | Steel |
| Diameter 1 | 75 mm |
| Surface | Brass-plated |
| Type | Brush Disc, drill |
| Function | Brush Disc, drill |
| Bristle Material | Steel |
| Brush Head Shape | Flat |
Additional Information
General Information
Flat Brush with Quick Chuck End - 75mm Flat Brush with Quick Chuck End - 75mm.
- Always wear eye protection
- Brass plated
- Steel wire
- For use with Laser's quick change facility for speedy switch from drill to driver
ONLY
£11.52
£11.52
Part number: 0354
Important compatibility info
| Function | Cup Brush, angle grinder |
| Material | Steel |
| Brush Head Shape | Conical |
| Title | Decarb Brush Set - 2 Piece |
| Number of Parts | 2 -part |
| Surface | Brass-plated |
| Type | Cup Brush, angle grinder |
Additional Information
General Information
Decarb Brush Set - 2pc. Decarb Brush Set - 2pc
- For use with an electric drill/cordless drill
- Size: 15mm
- 2 piece set - brass coated
- For cleaning carbon deposits from engine components etc.
ONLY
£15.58
£15.58
Part number: 0352
Important compatibility info
| Title | Wire Brush - Flat Type - 3in./75mm |
| Material | Steel |
| Diameter 1 | 75 mm |
| Surface | Brass-plated |
| Type | Brush Disc, drill |
| RPM to | 4.500 1/min |
| Function | Brush Disc, drill |
| Bristle Material | Steel |
| Brush Head Shape | Flat |
Additional Information
General Information
Wire Brush Flat Type 3" 75mm. Wire Brush Flat Type 3" 75mm
- Time saver
- Wear eye protection
- Maximum speed 4500rpm
- For use with standard power tools
- Flat steel circular wire brush
ONLY
£9.14
£9.14
Part number: 0351
Important compatibility info
| Brush Head Shape | Conical |
| Function | Cup Brush, angle grinder |
| Title | Wire Brush - Cup Type - 3in./75mm |
| Type | Cup Brush, angle grinder |
| Diameter 1 | 75 mm |
| Material | Steel |
Additional Information
General Information
Wire Brush Cup Type 3" 75mm. Wire Brush Cup Type 3" 75mm
- Always wear eye protection
- Available in 50mm & 75mm sizes
- Cup style Steel wire brush
- For use with standard power tools
ONLY
£9.80
£9.80
Part number: 0350
Important compatibility info
| Material | Steel |
| Brush Head Shape | Conical |
| Title | Wire Brush - Cup Type - 2in./50mm |
| Function | Cup Brush, angle grinder |
| Type | Cup Brush, angle grinder |
| Diameter 1 | 50 mm |
Additional Information
General Information
Wire Brush Cup Type 2" 50mm. Wire Brush Cup Type 2" 50mm
- Always wear eye protection
- Available in 50mm & 75mm sizes
- Cup style Steel wire brush
- For use with standard power tools
ONLY
£9.23
£9.23
Part number: 0348
Important compatibility info
| Title | Rubber Backing Pad - 125mm |
| Material | Butyl Rubber |
| Diameter 1 | 125 mm |
| Colour | black |
| Type | Mounting Flange, angle grinder |
| Function | Mounting Flange, angle grinder |
| Number of Parts | 5 -part |
Additional Information
General Information
Rubber Backing Pad - 5"/125mm dia. Rubber Backing Pad - 5"/125mm dia
- Always wear eye protection
- Flexible
- Backing arbour for sanding discs, polishing mop etc.
- For use with electric drill
- 6mm arbor
ONLY
£8.61
£8.61
Part number: 0347
Important compatibility info
| Title | Sanding Discs - Assorted - 125mm - Pack Of 15 |
| Material | Paper |
| Diameter 1 | 125 mm |
| for article number | For Laser 0348 |
| Colour | Natural |
| Type | Sanding Disc Set, angle grinder |
| Function | Sanding Disc Set, angle grinder |
| Number of Parts | 15 -part |
| Grit Rating (grinding agent) | 120. 80. 40 |
Additional Information
General Information
Sanding Discs 15pc - 3 Grades. Sanding Discs 15pc - 3 Grades
- Size: 125mm diameter
- 5 x 80 Grit (Medium)
- Use with 0348 Rubber Backing Pad
- 5 x 40 Grit (Coarse)
- 5 x 120 Grit (Fine)
- Coarse, Medium, Fine grades
ONLY
£5.39
£5.39
Part number: 0341
Important compatibility info
| Title | Mounted Stone Brush Set - 5 Piece |
| Type | Grinding Stone |
| Function | Grinding Stone |
| Number of Parts | 5 -part |
| Shaft Material | Steel |
Additional Information
General Information
Mounted Stone Set 5pc Mounted Stone Set 5pc.
- For use with an electric drill/cordless drill
- Varied heads for even the most intricate jobs
- Precision tool
- 5 abrasive heads for precision finishing
ONLY
£11.65
£11.65
Part number: 66261168618
Important compatibility info
| Title | Zirconium Flap Discs - 115mm - P120 - Pack of 1 |
Additional Information
There are many occasions where you will require some sort of abrasive around the house or at work. Will so many different options and suppliers in the market, it can be quite a difficult decision making the right choice. However, Saint Gobain is a world known manufacturer of abrasives and supply a large and diverse range of quality products that you can rely on time and time again. This Zirconium Flap Discs has a cloth backed aluminium oxide grain for fast and aggressive sanding. It’s ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings. The disc produces an excellent and uniform finishing result with maximum safety due to the strong 3 layered reinforcement. Each disc has a wheel size of 115 x 2.2mm (diameter x thickness). Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; bonded abrasives, coated abrasives, and diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people.
- To be used on 115mm angle grinder
- Ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings
- Suitable for sanding metal, wood and paint
- Cloth backed aluminium oxide grain for fast and aggressive sanding
ONLY
£8.52
£8.52
Part number: 66261039803
Important compatibility info
| Title | Non-Woven Hand Finishing Pads - 229 x 152mm Medium - Pack Of 10 |
Additional Information
However well you look after your car, there will always be one or two small dents or scratches in the bodywork. These may have been caused by flying stones, minor accidents or rusting. In order to repair these you will need to sand back and blend in the damage in preparation for re-spraying. To make sure you are using the best quality sanding products choose one from the Saint Gobain Abrasives range FlexOvit. As part of this range they supply a selection of non-woven hand finishing pads in handy packs of 10. These finishing pads are highly flexible and can be used wet or dry. Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; bonded abrasives, coated abrasives, and diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people.
- Highly flexible
- Use on a range of applications
- Can be washed and reused
- Can be used wet or dry
ONLY
£27.56
£27.56
Part number: 63642586014
Important compatibility info
| Title | Non-Woven Hand Finishing Pads - 229 x 152mm Ultra Fine - Pack Of 10 |
Additional Information
However well you look after your car, there will always be one or two small dents or scratches in the bodywork. These may have been caused by flying stones, minor accidents or rusting. In order to repair these you will need to sand back and blend in the damage in preparation for re-spraying. To make sure you are using the best quality sanding products choose one from the Saint Gobain Abrasives range FlexOvit. As part of this range they supply a selection of non-woven hand finishing pads in handy packs of 10. These finishing pads are highly flexible and can be used wet or dry. Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; bonded abrasives, coated abrasives, and diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people.
- Highly flexible
- Use on a range of applications
- Can be washed and reused
- Can be used wet or dry
ONLY
£33.17
£33.17
Part number: 63642585443
Important compatibility info
| Title | Flap Wheel - 40mm x 20mm - P80 |
Additional Information
There are many occasions where you will require some sort of abrasive around the house or at work. Will so many different options and suppliers in the market, it can be quite a difficult decision making the right choice. However, Saint Gobain is a world known manufacturer of abrasives and supply a large and diverse range of quality products that you can rely on time and time again. This Aluminium Oxide flap wheel has a cotton backed wheel for fast and aggressive sanding. It’s ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings. The wheel produces an excellent and uniform finishing result made easier as its flexible, great for those hard to reach areas. Each disc has a wheel size of 40 x 20 P80 (diameter x thickness). Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; bonded abrasives, coated abrasives, and diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people.
- Fits standard 6mm diameter chuck
- Flexible for hard to reach areas
- Cotton backed Aluminium Oxide
- Suitable for many different applications
ONLY
£10.61
£10.61
Part number: 63642585439
Important compatibility info
| Title | Flap Wheel - 40mm x 20mm - P40 |
Additional Information
There are many occasions where you will require some sort of abrasive around the house or at work. Will so many different options and suppliers in the market, it can be quite a difficult decision making the right choice. However, Saint Gobain is a world known manufacturer of abrasives and supply a large and diverse range of quality products that you can rely on time and time again. This Aluminium Oxide flap wheel has a cotton backed wheel for fast and aggressive sanding. It’s ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings. The wheel produces an excellent and uniform finishing result made easier as its flexible, great for those hard to reach areas. Each disc has a wheel size of 40 x 20 P40 (diameter x thickness). Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; bonded abrasives, coated abrasives, and diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people.
- Fits standard 6mm diameter chuck
- Flexible for hard to reach areas
- Cotton backed Aluminium Oxide
- Suitable for many different applications
ONLY
£10.43
£10.43
Part number: 63642585434
Important compatibility info
| Title | Flap Wheel - 30mm x 15mm - P80 |
Additional Information
There are many occasions where you will require some sort of abrasive around the house or at work. Will so many different options and suppliers in the market, it can be quite a difficult decision making the right choice. However, Saint Gobain is a world known manufacturer of abrasives and supply a large and diverse range of quality products that you can rely on time and time again. This Aluminium Oxide flap wheel has a cotton backed wheel for fast and aggressive sanding. It’s ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings. The wheel produces an excellent and uniform finishing result made easier as its flexible, great for those hard to reach areas. Each disc has a wheel size of 30 x 15 P80 (diameter x thickness). Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; bonded abrasives, coated abrasives, and diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people.
- Fits standard 6mm diameter chuck
- Flexible for hard to reach areas
- Cotton backed Aluminium Oxide
- Suitable for many different applications
ONLY
£9.53
£9.53
Part number: 63642585432
Important compatibility info
| Title | Flap Wheel - 30mm x 15mm - P60 |
Additional Information
There are many occasions where you will require some sort of abrasive around the house or at work. Will so many different options and suppliers in the market, it can be quite a difficult decision making the right choice. However, Saint Gobain is a world known manufacturer of abrasives and supply a large and diverse range of quality products that you can rely on time and time again. This Aluminium Oxide flap wheel has a cotton backed wheel for fast and aggressive sanding. It’s ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings. The wheel produces an excellent and uniform finishing result made easier as its flexible, great for those hard to reach areas. Each disc has a wheel size of 30 x 15 P60 (diameter x thickness). Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; bonded abrasives, coated abrasives, and diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people.
- Fits standard 6mm diameter chuck
- Flexible for hard to reach areas
- Cotton backed Aluminium Oxide
- Suitable for many different applications
ONLY
£9.53
£9.53
Part number: 63642585429
Important compatibility info
| Title | Flap Wheel- 30mm x 15mm - P40 |
Additional Information
There are many occasions where you will require some sort of abrasive around the house or at work. Will so many different options and suppliers in the market, it can be quite a difficult decision making the right choice. However, Saint Gobain is a world known manufacturer of abrasives and supply a large and diverse range of quality products that you can rely on time and time again. This Aluminium Oxide flap wheel has a cotton backed wheel for fast and aggressive sanding. It’s ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings. The wheel produces an excellent and uniform finishing result made easier as its flexible, great for those hard to reach areas. Each disc has a wheel size of 30 x 15 P40 (diameter x thickness). Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; bonded abrasives, coated abrasives, and diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people.
- Fits standard 6mm diameter chuck
- Flexible for hard to reach areas
- Cotton backed Aluminium Oxide
- Suitable for many different applications
ONLY
£9.53
£9.53
Part number: 63642556887
Important compatibility info
| Title | Wire Brush - Cup Type - 75mm |
Additional Information
- Suitable For Light Rust Removal And Deburring
- 6mm Spindle Fits Most Drill Chucks
- For General Cleaning Of Wood, Paint And Metal
ONLY
£6.83
£6.83
Part number: 63642556885
Important compatibility info
| Title | Wire Brush - Cup Type - 50mm |
Additional Information
- Suitable For Light Rust Removal And Deburring
- 6mm Spindle Fits Most Drill Chucks
- For General Cleaning Of Wood, Paint And Metal
ONLY
£6.35
£6.35
Page 1 of 3
Abrasive Discs & Brushes
