Abrasive Discs & Brushes

invoice Page 2 of 3
Results 31 - 60 of 90
Title Rubber Backing Pad - 125mm

Additional Information

  • 125mm x 12mm x 6mm spindle
  • 6mm Spindle Fits Most Drill Chucks
  • Backing pad for use with drill mountable discs
Flexovit 63642556833 Backing Pad For Fibre Discs 6mm Spindle
ONLY
£10.45
Quantity:
Part number: 91450

Additional Information

  • The Fine easily removes dirt and paint runs from finished paint surfaces
  • Fine pattern removes tiny imperfections
  • The Coarse is ideal for removing sags and runs on primer or top coat
  • Precision ground file gives uniform results
  • Time saver
Power-Tec 91450 Nib File - Fine
ONLY
£11.82
Quantity:
Title Mounted Stone Brush Set - 5 Piece

Additional Information

  • 5 abrasive heads for precision finishing
  • Precision tool
  • Varied heads for even the most intricate jobs
  • For use with an electric drill/cordless drill
Laser 0341 Mounted Stone Set 5pc
ONLY
£11.86
Quantity:
Title Quick Lock Backing Pad - 75mm

Additional Information

  • Sturdy rubber construction with flexibility
  • Comes with 6.0mm Spindles
  • For all Quick-Lock products
Abracs 32111 Quick Lock Backing Pad 75mm Pk 1
ONLY
£12.00
Quantity:
Title Wire Brush - Flat Type With Quick Chuck End - 75mm

Additional Information

  • For use with Laser's quick change facility for speedy switch from drill to driver
  • Steel wire
  • Brass plated
  • Always wear eye protection
Laser 3146 Flat Brush With Quick Chuck End - 75mm
ONLY
£12.40
Quantity:

Additional Information

  • For use with Laser's quick change facility for speedy switch from drill to driver
  • Speedy switch from drill to driver
  • Abrasive fibre brush
  • Time saver
Laser 3152 Abrasive Wheel With Quick Chuck - 75mm
ONLY
£13.35
Quantity:
Title Crimped Brush - Cup Type - 75mm x M14

Additional Information

  • Removes metal, slag, rust and paints
  • For angle grinders
  • Crimped Cup
  • 70mm Thread
Abracs 32133 Crimped Cup Brush 75mm X M14
ONLY
£13.43
Quantity:
Title Stripping Disc - Blaze - Depressed Centre - 115mm

Additional Information

However well you look after your car, there will always be one or two small dents or scratches in the bodywork. These may have been caused by flying stones, minor accidents or rusting. In order to repair these you will need to sand back and blend in the damage in preparation for re-spraying. To make sure you are using the best quality sanding products choose one from the Saint Gobain Abrasives range, Norton. As part of this range they supply a selection of stripping discs for rapid stripping of all coatings. They are a 3D open web structure, prevents clogging & loading with ceramic grain technology. The disc is 115mm in diameter and has a 22mm bore. Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; Bonded Abrasives, Coated Abrasives, and Diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people. Norton is a brand with an exceptional heritage and an excellent brand image. It offers a very complete collection of high performance and high value abrasives for use in all industrial markets, in addition to a merchandising line of pre-packaged abrasives, ideal for Distribution & DIY markets.
  • 115mm diameter
  • 22mm bore
  • 3D open web structure, prevents clogging & loading
  • Blaze SG Ceramic grain technology
  • For rapid stripping of all coatings
  • Reduces damage to substrate
Norton 66623303783 Blaze Stripping Disc 115 X 22mm
ONLY
£13.52
Quantity:

Additional Information

  • For use with Laser's quick change facility for speedy switch from drill to driver
  • Allows speedy switch from drill to driver
  • Maximum 4500 rpm
  • For use with a drill (cordless or electric)
Laser 3151 Buffing Wheel With Quick Chuck - 50mm
ONLY
£13.71
Quantity:
Title Rubber Backing Pad - 100mm

Additional Information

  • Suitable for use with semi-flexible discs and fibre sanding discs
  • Flexible and hard wearing
  • Rubber
  • Single Pack
  • 100mm M10 x 1.5 Thread
Abracs 32091 Rubber Backing Pad 100mm 1 Pack
ONLY
£13.91
Quantity:
Title Wire Brush - Cup Type With Quick Chuck End - 75mm

Additional Information

  • For use with Laser's quick change facility for speedy switch from drill to driver
  • Steel wire
  • Brass plated
  • Always wear eye protection
Laser 3147 Cup Brush With Quick Chuck End - 75mm
ONLY
£14.79
Quantity:
Title Quick Lock Flap Discs - P80 - 50mm - Pack Of 5

Additional Information

  • Zirconium for a range of metals including Stainless Steel
  • For use with Quick-Lock Spindles
  • 50mm Flap Disc
  • Supplied in a handy pack of 5
  • Image used for illustration purposes only
Abracs 32114 Quick Lock Flap Discs 50mmxp80 Pk5
ONLY
£14.80
Quantity:
Title Flap Wheel - 40mm x 20mm - P40 - Pack Of 5

Additional Information

  • 40mm x 20mm Flap Wheel
  • 6mm Spindle mounted
  • Aluminium Oxide
  • Heavy duty
  • Packed in quantities of 5
  • Image used for illustration purposes only
Abracs 32180 Flap Wheels 40mm X 20mm X P40 Pk 5
ONLY
£15.34
Quantity:
Title Decarb Brush Set - 2 Piece

Additional Information

  • For cleaning carbon deposits from engine components etc.
  • 2 piece set - brass coated
  • Size: 15mm
  • For use with an electric drill/cordless drill
Laser 0354 Decarb Brush Set - 2pc
ONLY
£15.78
Quantity:
Title Rubber Backing Pad - 115mm

Additional Information

  • Suitable for use with semi-flexible discs and fibre sanding discs
  • Flexible and hard wearing
  • Rubber
  • Single Pack
  • 115mm M14 x 1.5
Abracs 32092 Rubber Backing Pad 115mm 1 Pack
ONLY
£16.11
Quantity:
Title Flap Wheel - 40mm x 30mm - P40 - Pack Of 5

Additional Information

  • 40mm x 30mm Flap Wheel
  • 6mm Spindle mounted
  • Aluminium Oxide
  • Heavy duty
  • Packed in quantities of 5
  • Image used for illustration purposes only
Abracs 32182 Flap Wheels 40mm X 30mm X P40 5pk
ONLY
£16.77
Quantity:
Title Flap Wheel - 40mm x 20mm - P80 - Pack Of 5

Additional Information

  • 40mm x 20mm Flap Wheel
  • 6mm Spindle mounted
  • Aluminium Oxide
  • Heavy duty
  • Packed in quantities of 5
  • Image used for illustration purposes only
Abracs 32181 Flap Wheels 40mm X 20mm X P80 Pk 5
ONLY
£16.94
Quantity:
Title Flap Wheel - 40mm x 30mm - P80 - Pack Of 5

Additional Information

  • 40mm x 30mm Flap Wheel
  • 6mm Spindle mounted
  • Aluminium Oxide
  • Heavy duty
  • Packed in quantities of 5
  • Image used for illustration purposes only
Abracs 32183 Flap Wheels 40mm X 30mm X P80 5pk
ONLY
£17.85
Quantity:
Title Fibre Sanding Discs - P80 - 100mm - Pack Of 25

Additional Information

  • Suitable for general purpose metals
  • Heavy duty Aluminium Oxide
  • Supplied in shrink-wrapped packs
  • 100mm x 16mm Fibre Sanding Discs
  • Pack Qty: 25
Abracs 32087 Fibre Sanding Discs 100mmxp80 25 Pk
ONLY
£19.38
Quantity:
Title Fibre Sanding Discs - P60 - 100mm - Pack Of 25

Additional Information

  • Suitable for general purpose metals
  • Heavy duty Aluminium Oxide
  • Supplied in shrink-wrapped packs
  • 100mm x 16mm Fibre Sanding Discs
  • Pack Qty: 25
Abracs 32086 Fibre Sanding Discs 100mmxp60 25 Pk
ONLY
£19.39
Quantity:
Title Fibre Sanding Discs - P36 - 100mm - Pack Of 25

Additional Information

  • Suitable for general purpose metals
  • Heavy duty Aluminium Oxide
  • Supplied in shrink-wrapped packs
  • 100mm x 16mm Fibre Sanding Discs
  • Pack Qty: 25
Abracs 32085 Fibre Sanding Discs 100mmxp36 25pk
ONLY
£20.33
Quantity:
Title Sanding disc - Hook and loop - 150mm x P60 - Box of 25

Additional Information

  • Suitable for use on a full range of materials including wood, metal, plastic and fibreglass
  • Packed and sold in 25s in colourful sales packs
  • Hook and loop sanding disc
  • Size: 150mm
Abracs 32224 Hook & Loop Disc 150Mm X P60 Box 25
ONLY
£20.63
Quantity:
Title Sanding disc - Hook and loop - 150mm x P80 - Box of 25

Additional Information

  • Suitable for use on a full range of materials including wood, metal, plastic and fibreglass
  • Packed and sold in 25s in colourful sales packs
  • Hook and loop sanding disc
  • Size: 150mm
Abracs 32225 Hook & Loop Disc 150mm X P80 Box 25
ONLY
£20.63
Quantity:
Title Sanding disc - Hook and loop - 150mm x P320 - Box of 25

Additional Information

  • Suitable for use on a full range of materials including wood, metal, plastic and fibreglass
  • Packed and sold in 25s in colourful sales packs
  • Hook and loop sanding disc
  • Size: 150mm
Abracs 32229 Hook & Loop Disc 150mm X P320 Box 25
ONLY
£20.63
Quantity:
Title Sanding disc - Hook and loop - 150mm x P120 - Box of 25

Additional Information

  • Suitable for use on a full range of materials including wood, metal, plastic and fibreglass
  • Packed and sold in 25s in colourful sales packs
  • Hook and loop sanding disc
  • Size: 150mm
Abracs 32227 Hook & Loop Disc 150Mm X P120 Box 25
ONLY
£22.09
Quantity:
Title Non-Woven Hand Finishing Pads - 230 x 150mm Medium - Pack Of 10

Additional Information

  • For cleaning and polishing a range of materials
  • 230mm x 150mm pads
  • Supplied in 10's
  • Image used for illustration purposes only
  • Medium is Maroon
Abracs 32116 Hand/Finishing Pads Medium 10pk
ONLY
£23.43
Quantity:
Title Non-Woven Hand Finishing Pads - 230 x 150mm Fine - Pack Of 10

Additional Information

  • For cleaning and polishing a range of materials
  • 230mm x 150mm pads
  • Supplied in 10's
  • Image used for illustration purposes only
  • Fine is Green
Abracs 32117 Hand/Finishing Pads Fine 10pk
ONLY
£23.47
Quantity:
Title Non-Woven Hand Finishing Pads - 230 x 150mm Very Fine - Pack Of 10

Additional Information

  • For cleaning and polishing a range of materials
  • 230mm x 150mm pads
  • Supplied in 10's
  • Image used for illustration purposes only
  • Very Fine is Grey
Abracs 32118 Hand/Finishing Pads Very Fine Pk 10
ONLY
£23.47
Quantity:
Title Bench Grinder Brush - 150mm x 20mm

Additional Information

  • Crimped steel wire brushes suitable for bench grinders
  • The high resistance steel wire gives the brush more aggression depending on users requirements
  • Ideal for metal surface preparation and the removal of rust and scales
  • Brushes come complete with bore reducing bushes from 32mm to 13mm making them adaptable to virtually all grinders
Abracs 32135 Bench Grinder Brush 150mm X 20mm
ONLY
£23.96
Quantity:
Title Fibre Sanding Discs - P80 - 115mm - Pack Of 25

Additional Information

  • Suitable for general purpose metals
  • Heavy duty Aluminium Oxide
  • Supplied in shrink-wrapped packs
  • 115mm x 16mm Fibre Sanding Discs
  • Pack Qty: 25
Abracs 32090 Fibre Sanding Discs 115mmxp80 25 Pk
ONLY
£24.18
Quantity:

Page 2 of 3
Abrasive Discs & Brushes

Your feedback more
Trusted reviews more
Secure payments more
Simple returns more