Proud to be a UK-based company
Contact usAbrasive Discs & Brushes
Tools Sub-Categories
invoice Page 6 of 7
Results 51 - 60 of 62
Part number: 63642556882
Important compatibility info
| Title | Wire Brush - Flat Type - Crimped - 3in./75mm |
Additional Information
There are many occasions where you will require some sort of abrasive around the house or at work. Will so many different options and suppliers in the market, it can be quite a difficult decision making the right choice. However, Saint Gobain is a world known manufacturer of abrasives and supply a large and diverse range of quality products that you can rely on time and time again. This wire brush wheel is ideal for roughing up contoured metal surfaces, rust removal and deburring. The wheel has a maximum RPM of 4500 and will fit most drills with a 6mm spindle. Each wheel is 75mm in diameter. Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; bonded abrasives, coated abrasives, and diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people.
- Max RPM 4500
- For general cleaning of wood & metal
- 6mm Spindle Fits Most Drill Chucks
- Suitable for rust removal & deburring
ONLY
£7.19
£7.19
Part number: 63642556883
Important compatibility info
| Title | Wire Brush - Flat Type - Crimped - 4in./100mm |
Additional Information
There are many occasions where you will require some sort of abrasive around the house or at work. Will so many different options and suppliers in the market, it can be quite a difficult decision making the right choice. However, Saint Gobain is a world known manufacturer of abrasives and supply a large and diverse range of quality products that you can rely on time and time again. This wire brush wheel is ideal for roughing up contoured metal surfaces, rust removal and deburring. The wheel has a maximum RPM of 4500 and will fit most drills with a 6mm spindle. Each wheel is 100mm in diameter. Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; bonded abrasives, coated abrasives, and diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people.
- Max RPM 4500
- For general cleaning of wood & metal
- 6mm Spindle Fits Most Drill Chucks
- Suitable for rust removal & deburring
ONLY
£6.83
£6.83
Part number: 63642556887
Important compatibility info
| Title | Wire Brush - Cup Type - 75mm |
Additional Information
- Suitable For Light Rust Removal And Deburring
- 6mm Spindle Fits Most Drill Chucks
- For General Cleaning Of Wood, Paint And Metal
ONLY
£7.69
£7.69
Part number: 63642556889
Important compatibility info
| Title | Wire End Brush - 25mm |
Additional Information
- Suitable For Light Rust Removal And Deburring
- For General Cleaning Of Wood, Paint And Metal
- 6mm Spindle Fits Most Drill Chucks
ONLY
£7.13
£7.13
Part number: 63642585443
Important compatibility info
| Title | Flap Wheel - 40mm x 20mm - P80 |
Additional Information
There are many occasions where you will require some sort of abrasive around the house or at work. Will so many different options and suppliers in the market, it can be quite a difficult decision making the right choice. However, Saint Gobain is a world known manufacturer of abrasives and supply a large and diverse range of quality products that you can rely on time and time again. This Aluminium Oxide flap wheel has a cotton backed wheel for fast and aggressive sanding. It’s ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings. The wheel produces an excellent and uniform finishing result made easier as its flexible, great for those hard to reach areas. Each disc has a wheel size of 40 x 20 P80 (diameter x thickness). Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; bonded abrasives, coated abrasives, and diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people.
- Fits standard 6mm diameter chuck
- Flexible for hard to reach areas
- Cotton backed Aluminium Oxide
- Suitable for many different applications
ONLY
£10.61
£10.61
Part number: 63642586014
Important compatibility info
| Title | Non-Woven Hand Finishing Pads - 229 x 152mm Ultra Fine - Pack Of 10 |
Additional Information
However well you look after your car, there will always be one or two small dents or scratches in the bodywork. These may have been caused by flying stones, minor accidents or rusting. In order to repair these you will need to sand back and blend in the damage in preparation for re-spraying. To make sure you are using the best quality sanding products choose one from the Saint Gobain Abrasives range FlexOvit. As part of this range they supply a selection of non-woven hand finishing pads in handy packs of 10. These finishing pads are highly flexible and can be used wet or dry. Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; bonded abrasives, coated abrasives, and diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people.
- Highly flexible
- Use on a range of applications
- Can be washed and reused
- Can be used wet or dry
ONLY
£32.24
£32.24
Part number: 66261039803
Important compatibility info
| Title | Non-Woven Hand Finishing Pads - 229 x 152mm Medium - Pack Of 10 |
Additional Information
However well you look after your car, there will always be one or two small dents or scratches in the bodywork. These may have been caused by flying stones, minor accidents or rusting. In order to repair these you will need to sand back and blend in the damage in preparation for re-spraying. To make sure you are using the best quality sanding products choose one from the Saint Gobain Abrasives range FlexOvit. As part of this range they supply a selection of non-woven hand finishing pads in handy packs of 10. These finishing pads are highly flexible and can be used wet or dry. Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; bonded abrasives, coated abrasives, and diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people.
- Highly flexible
- Use on a range of applications
- Can be washed and reused
- Can be used wet or dry
ONLY
£27.83
£27.83
Part number: 66261168618
Important compatibility info
| Title | Zirconium Flap Discs - 115mm - P120 - Pack of 1 |
Additional Information
There are many occasions where you will require some sort of abrasive around the house or at work. Will so many different options and suppliers in the market, it can be quite a difficult decision making the right choice. However, Saint Gobain is a world known manufacturer of abrasives and supply a large and diverse range of quality products that you can rely on time and time again. This Zirconium Flap Discs has a cloth backed aluminium oxide grain for fast and aggressive sanding. It’s ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings. The disc produces an excellent and uniform finishing result with maximum safety due to the strong 3 layered reinforcement. Each disc has a wheel size of 115 x 2.2mm (diameter x thickness). Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; bonded abrasives, coated abrasives, and diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people.
- To be used on 115mm angle grinder
- Ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings
- Suitable for sanding metal, wood and paint
- Cloth backed aluminium oxide grain for fast and aggressive sanding
ONLY
£8.52
£8.52
Part number: 0354
Important compatibility info
| Function | Cup Brush, angle grinder |
| Material | Steel |
| Brush Head Shape | Conical |
| Title | Decarb Brush Set - 2 Piece |
| Number of Parts | 2 -part |
| Surface | Brass-plated |
| Type | Cup Brush, angle grinder |
Additional Information
General Information
Decarb Brush Set - 2pc. Decarb Brush Set - 2pc
- For use with an electric drill/cordless drill
- Size: 15mm
- 2 piece set - brass coated
- For cleaning carbon deposits from engine components etc.
ONLY
£15.58
£15.58
Part number: 66623303783
Important compatibility info
| Title | Stripping Disc - Blaze - Depressed Centre - 115mm |
Additional Information
However well you look after your car, there will always be one or two small dents or scratches in the bodywork. These may have been caused by flying stones, minor accidents or rusting. In order to repair these you will need to sand back and blend in the damage in preparation for re-spraying. To make sure you are using the best quality sanding products choose one from the Saint Gobain Abrasives range, Norton. As part of this range they supply a selection of stripping discs for rapid stripping of all coatings. They are a 3D open web structure, prevents clogging & loading with ceramic grain technology. The disc is 115mm in diameter and has a 22mm bore. Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; Bonded Abrasives, Coated Abrasives, and Diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people. Norton is a brand with an exceptional heritage and an excellent brand image. It offers a very complete collection of high performance and high value abrasives for use in all industrial markets, in addition to a merchandising line of pre-packaged abrasives, ideal for Distribution & DIY markets.
- Reduces damage to substrate
- For rapid stripping of all coatings
- Blaze SG Ceramic grain technology
- 3D open web structure, prevents clogging & loading
- 22mm bore
- 115mm diameter
ONLY
£13.51
£13.51
Page 6 of 7
Abrasive Discs & Brushes
