Proud to be a UK-based company
Contact usWorkshop Tools
Categories
Brand:
Select Brand
invoice Page 4 of 42
Results 151 - 200 of 2082
Part number: M12BPS-0
Important compatibility info
| Other Part Number | M12 BPS-0 |
| Title | M12 Sub Compact Polisher / Sander Bare Unit Bare Unit |
| Other Part Number | 4933447791 |
Additional Information
M12 BPS-0 - M12™ sub compact polisher / sander
- Supplied with polishing pad, sanding pad, polishing sponge white, polishing sponge yellow, lambswool, side handle
- Flexible battery system: works with all MILWAUKEE M12 batteries
- REDLITHIUM battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life
- Individual battery cell monitoring optimises tool run time and ensures long term pack durability
- Detachable 2 position side handle
- Spindle lock allows fast, tool free accessory change
- Compact design with only 130 mm allows access to hard areas
- Long run time allows frequent task completion with one battery charge
- Large capacity of 76 mm polishing sponge and 50 mm sanding pad size for fast job completion
- REDLINK overload protection electronics in tool and battery pack deliver best in class system durability
- Variable 2 speed selection (0-2800 / 0-8300 RPM) for both polishing and sanding applications
ONLY
£106.71
£106.71
Part number: M12BPRT-0
Important compatibility info
| Title | M12 Sub Compact Rivet Tool Battery & Charger Not Included |
| Other Part Number | M12 BPRT-0 |
Additional Information
M12 BPRT-0 M12 sub compact rivet tool
- Flexible battery system: works with all MILWAUKEE M12 batteries
- REDLITHIUM battery pack provides superior pack construction electronics and fade-free performance to deliver more run time and more work over pack life
- Rivets in one stroke with a 20.32 mm stroke length
- On board fuel gauge and LED light for added user convenience and illumination in low lit working conditions
- Tool-free access to easily clean jaws. On-board nose piece storage and removal tool for user convenience
- Integrated belt hook and lanyard tie off point
- Ergonomic design with 273 mm H x 66.8 mm W x 165 mm in length without mandrel collector
- Retention nose pieces hold rivets in any orientation
- Up to 325 x 4.8 mm stainless steel rivets on a single charge with a 2.0 Ah battery pack
- Supplied with 4 x retaining tips
- Suitable for all aluminium steel stainless steel and copper rivets up to 4.8 mm
ONLY
£203.92
£203.92
Part number: M12BLROT-0
Important compatibility info
| Title | M12™ Brushless Rotary Tool |
| Other Part Number | 4933493591 |
Additional Information
M12 BLROT-0 - M12™ Brushless Rotary Tool
- Spindle lock for easy accessory change
- Low weight only 0.36 kg
- LED light illuminates the work piece
- Soft grip and low vibration allows user to work comfortably and for longer periods
- 3.2 mm collet included, compatible with most common accessories
- Variable speed from 5000 rpm to 27,500 rpm with 12 speed settings allows the user to dial in the correct speed for each application
- Compact and balanced in all orientation design allow the user to hold the tool close to the work piece
ONLY
£167.06
£167.06
Part number: M12B6
Important compatibility info
| Other Part Number | M12 B6 |
| Title | M12 6.0 Ah battery |
| Other Part Number | 4932451395 |
Additional Information
M12 B6 - M12™ 6.0 Ah battery
- Discharge protection prevents cell damage from over-discharge
- Can be used in extreme temperatures down to -20 °C without compromising on runtime and battery life
- REDLITHIUM™ protection with REDLINK™ digital overload protection to prevent users from damaging their cordless power tool investment in abusive situations
- Individual cell monitoring ensures optimal charge and discharge for maximum life
- Integrated welded frame battery construction with shock responsive separators preventing pack failure from excessive vibrations or drops
- Delivers up to 3x more run time, up to 20% more power and up to 2x more battery life compared with other Lithium-Ion technologies and/or with previous MILWAUKEE® battery technology (Results depend on tool and application)
ONLY
£57.98
£57.98
Part number: M12ATB-0C
Important compatibility info
| Other Part Number | 4933493136 |
| Title | M12 Automotive Tech. Borescope |
Additional Information
A MILWAUKEE® inspection camera allows you to discover the smallest problems inside pipes, drains and sewers before you start to roll up your sleeves.
- IP67 camera head and camera cable
- Included 32 GB micro SD card
- 5 modes of brightness
- 720p camera resolution with 3 level zoom
- 270° rotating screen
- Front and side view camera
- 5.0 mm camera head
- 4.3″ LCD screen delivers sharp and clear images
ONLY
£437.60
£437.60
Part number: M12AL-0
Important compatibility info
| Title | M12 Led Area Light Bare Unit |
| Other Part Number | 4933451394 |
Additional Information
M12 AL-0 - M12™ LED area light
- Low battery indicator, light flashes when battery pack is low on charge
- IP54 rating, the light is protected from dust and splashing water
- Integrated magnets, clamping mechanism, and key hole for screws / nails provide multiple mounting options for different surfaces
- Highly durable and impact resistant polycarbonate lens to withstand drops up to 2.7 metres
- Most compact flood light designed for the on-the-go needs of service and maintenance trades
- Five high performance LEDs provide 1000 lumens of light output replacing 250 W halogen lights
- TRUEVIEW™ high definition lighting
- Flexible battery system: works with all MILWAUKEE® M12™ batteries
ONLY
£114.04
£114.04
Part number: M12-18FC
Important compatibility info
| Other Part Number | 4932451080 |
| Title | M12 - M18 fast charger |
Additional Information
M12-18 FC - M12™ - M18™ fast charger
- Recharges in sequence - first in, first to charge - resulting in less time needed to manage charging cycles
- M12™ REDLITHIUM™ 2.0 Ah / 3.0 Ah / 4.0 Ah / 6.0 Ah battery packs recharge in 26 min / 50 min / 52 min / 95 min or less
- M18™ REDLITHIUM™ 2.0 Ah / 4.0 Ah / 5.0 Ah battery packs recharge in 26 min / 52 min / 59 min or less
- Recharges all M18™, M14™ and M12™ REDLITHIUM™ battery packs
ONLY
£72.77
£72.77
Part number: M12-18AC
Important compatibility info
| Title | M12-M18 car charger |
| Other Part Number | 4932459205 |
Additional Information
M12-18 AC - M12™-M18™ car charger
- M18™ REDLITHIUM™ 2.0 Ah / 4.0 Ah / 5.0 Ah / 6.0 Ah / 9.0 Ah battery packs recharge in 40 min / 80 min / 100 min / 124 min/ 180 min or less
- Recharges all M18™ and M12™ REDLITHIUM™ battery packs
- Recharges in sequence - first in, first to charge - resulting in less time needed to manage charging cycles
- M12™ REDLITHIUM™ 2.0 Ah / 3.0 Ah / 4.0 Ah / 6.0 Ah battery packs recharge in 40 min / 70 min / 80 min / 90 min or less
- Charges MILWAUKEE® batteries on the go, perfect for tradesmen and other professional that can use the down time to re-charge their batteries using conventional 12V sockets
ONLY
£105.73
£105.73
Part number: M12FDSS-0B
Important compatibility info
| Other Part Number | M12 FDSS-0B |
| Title | M12 FDSS-0B - M12 FUEL sub compact spot sander -1pc |
Additional Information
M12 FDSS-0B - M12 FUEL™ sub compact spot sander -1pc
- Flexible battery system: works with all MILWAUKEE® M12™ batteries
- Sponge interface pad included optimises the tool for profiles and contours which increases the precision and removal of material
- Low vibration at only 4.3 m/s²
- Hook and loop pad allows the user to change quickly between different grit types
- Compact detail sander with a penta shaped pad allows uncompromised corner accessibility
- The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering outstanding power, run time and durability
- LED lights up your work area for better visibility
- Four speed modes allows the correct speed to be set for different types of material
ONLY
£166.99
£166.99
Part number: M12FDGS-0
Important compatibility info
| Other Part Number | 4933471435 |
| Title | M12 Fuel Straight Die Grinder Battery & Charger Not Included Bare Unit |
| Other Part Number | M12 FDGS-0 |
Additional Information
M12 FDGS-0 - M12 FUEL™ straight die grinder
- The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE's POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power, run time and durability
- Supplied with 6 and 8 mm collets
- To be used with discs up to 50 mm
- Features a 3-mode speed control and responsive variable speed trigger enabling outstanding control
- Best-in-class size (262 mm long) to help reach in tight places, and offers great mobility and access
- The first cordless in-line die grinder that delivers more power vs. pneumatic models
ONLY
£159.13
£159.13
Part number: M12FNB16-0X
Important compatibility info
| Title | M12 Fuel 1.6 mm Nibbler |
Additional Information
M12 FNB16-0X M12 FUEL 1.6 mm nibbler
- The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE brushless motor REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power run time and durability
- Integrated belt hook and lanyard tie off point
- Maximum control for any material with a 5-step speed dial it is ideal for working with stainless steel and aluminium
- Tool-free die holder and punch change
- Tool-free change of cutting direction in 90dgsteps
- LED lights up your work area for better visibility
- Chip collection bag for a clean working environment
- Auto-control start feature it starts slow and ramps to full speed when the tool detect the user is making a cut
- First 12V Nibbler with max. cutting capacity in mild Steel: 1.6 mm in Stainless Steel: 1.2 mm in Aluminium: 2.1 mm
- Flexible battery system: works with all MILWAUKEE M12 batteries
- With only 1.6 kg (6.0 Ah battery included) it is the lightest cordless Nibbler on the market while still outperforming 18V brushed competitors
ONLY
£274.42
£274.42
Part number: C12RAD-0
Important compatibility info
| Other Part Number | 4933416900 |
| Title | M12 Sub Compact Right Angle Drill Bare Unit |
Additional Information
C12 RAD-0 - M12™ sub compact right angle drill
- Individual battery cell monitoring optimises tool run time and ensures long term pack durability
- Electronic clutch with indicator light for complete control
- Flexible battery system: works with all MILWAUKEE® M12™ batteries
- REDLITHIUM™ battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life
- 10 mm chuck for quick bit changes and bit retention
- Variable speed paddle switch trigger for comfortable working in any situation
- REDLINK™ overload protection electronics in tool and battery pack deliver best in class system durability
- Heavy Duty full metal gearbox and gears for superior durability and maximum torque
- On board fuel gauge and LED light - added user convenience and illumination in low lit working conditions
ONLY
£135.77
£135.77
Part number: C12C
Important compatibility info
| Other Part Number | C12 C |
Additional Information
C12 C - M12™ charger
- REDLITHIUM™ 1.5 Ah / 2.0 Ah battery packs recharge in 30 min / 40 min or less
- Encapsulated circuit board protects the electronics from dust, moisture and impact
- Progressive charge indication: battery LED's light up incrementally to give feedback on current charge level of battery pack
- REDLITHIUM™ 3.0 Ah / 4.0 Ah battery packs recharge in 60 min / 80 min or less
- Temperature protection electronics optimises the charger rate in extreme temperatures to extend battery life
ONLY
£48.73
£48.73
Part number: 49560260
Important compatibility info
| Title | Holesaw Adjustable 51-178mm-5pc |
Additional Information
Holesaw Adjustable 51-178mm-5pc
- Laser marked preset diameters at 51 178 mm.
- Diameter is adjustable from 51 mm to 178 mm in 6.4 mm steps.
- Dust collection shroud for 100% dust free work when overhead drilling.
- For cutting large diameter holes for air conditioning pipes fans downlights and ceiling speakers.
- Suitable for use on drywall (max. 25 mm) and ceiling tile. Not suitable for OSB wood boards.
ONLY
£36.66
£36.66
Part number: 4933499412
Important compatibility info
Additional Information
M12 FUEL™ INSIDER™ PASS-THROUGH RATCHET
- Flexible battery system: works with all MILWAUKEE® M12™ batteries
- The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering outstanding power, run time and durability
- The dual LED lights illuminate the work area while the on-board fuel gauge displays remaining run time
- Premium rubber overmold withstands corrosive materials and provides increased comfort when in use
- Variable speed metal trigger provides ultimate control of the tool
- The included ¼″ and ⅜″ anvil adapters and ¼″ Hex bit holder makes it the most versatile ratcheting solution
- Includes sockets from 8 mm to 19 mm as well as 21 mm
- Pass-through sockets up to a size of 15 mm allow users to comfortably fasten and unfasten nuts on bolts of any length
- The extended neck allows users better access in hard-to-reach places
- Features the lowest-profile head for best-in-class access in confined spaces
- With up to 81 Nm of max torque and 350 rpm’s, this tool offers the perfect combination of power and speed
ONLY
£449.03
£449.03
Part number: 4933499163
Important compatibility info
| Title | M18 FUEL HIGH TORQUE 1/2in. IMPACT WRENCH WITH FRICTION RING BARE UNIT |
Additional Information
- The M18 FUEL high torque impact wrench with ONE-KEY technology delivers 1356 Nm of fastening torque in a compact size of 213 mm, which gives more access in tight spaces
- The 4 -Mode drive control allows the user to shift into four different speed and torque settings to maximise application versatility
- Mode 4 bolt removal, provides a maximum nut-busting torque of 1898 Nm then shifts to 750 rpm for outstanding control when removing fasteners
- The integrated blow counting sensor enhances the consistent repeatability of the chosen torque setting
- ONE-KEY tool customisation allows the user to optimise their tool for specific applications
- ONE-KEY tool tracking & security offers a cloud-based inventory management platform that supports both location tracking and theft prevention
- Flexible battery system: works with all Milwaukee M18 batteries
- 1/2in. Friction ring reception
ONLY
£301.25
£301.25
Part number: 4933498065
Important compatibility info
| Title | M18 FUEL MULTI-TOOL BARE UNIT |
Additional Information
- POWERSTATE brushless motor pairs with an aggressive oscillation angle of 2.1° (left/ right) and 10,000 – 20,000 OPM to deliver one of the fastest cut speeds in the industry
- Suitable for many demanding applications with ease, such as rip cuts through hardwoods and nail embedded wood
- 10-setting dial with an auto-load feature allows users to adjust the speed to the application
- FIXTEC tool free blade change with universal blade change adaptor included to accept all major competitor blades
- Integrated 180 degree LED light for maximum visibility in low-light situations
- Supplied with 1x universal fit OPEN-LOK oscillating multi-tool wood blade, 1x multi-tool sanding pad, 1x 60 grit sand paper, 1x 80 grit sand paper, 2x 120 grit sand paper, and 1x 240 grit sand paper
- The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE's POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power, run time and durability
- Flexible battery system: works with all MILWAUKEE M18 batteries
ONLY
£228.66
£228.66
Part number: 4933493444
Important compatibility info
| Title | M18 Air Fan Gen 2 Bare Unit |
Additional Information
- Variable speed dial and a 180 mm blade diameter for optimised air flow up to 1.444 m³/h
- Adjustable head allows the user to utilise the fan in various heights and positions over a range of 300°
- Compact design with integrated carry handle to maximise portability
- Compatible with the MILWAUKEE PACKOUT system
- Key holes on the bottom gives the user the option to wall mount the fan if needed and pass thru holes on the sides allow for additional hanging capability
- 3 hours run time on speed high with a M18 REDLITHIUM 5.0 Ah battery pack
- Flexible battery system: works with all MILWAUKEE M18 batteries
- AC/DC, allows the user to run on M18 REDLITHIUM or AC power when available
- AC adaptor supplied
ONLY
£153.36
£153.36
Part number: 4933493301
Important compatibility info
Additional Information
- Up to 14.2 m³/min of air volume at 193 km/h to clear debris
- Consistent blowing force of 12.2 N throughout the entire battery discharge
- Reaches full throttle in under 1 second
- Ambidextrous variable speed lock allowing the user to lock on to any speed for precise applications and optimum run time
- Compatible with interchangeable nozzle attachments to optimise the blowing pattern for various applications
- The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE's POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power, run time and durability
- Flexible battery system: works with all MILWAUKEE M18 batteries
ONLY
£186.19
£186.19
Part number: 4933493293
Important compatibility info
| Title | M18 FUEL Hedge Trimmer 45 cm Bare Unit |
Additional Information
- Double sharpened blade for clean cuts and removal of thicker material
- 45 cm blade for more flexibility and the power to cut 19 mm branches
- Sustains power under load without bogging down
- Up to 2 hours run time with an M18 HIGH OUTPUT 8.0 Ah battery pack
- All metal gear case fully encloses and completely protects the gear drive system from jobsite abuse
- Blade tip guard to protect the blades and prevent accidental damage of fences or other objects
- Bail handle placement and weight distribution provide the best combination of balance and control
- Flexible battery system: works with all MILWAUKEE M18 batteries
ONLY
£389.45
£389.45
Part number: 4933492663
Important compatibility info
| Title | M18 FUEL OUTDOOR POWER HEAD GRASS TRIMMER BARE UNIT |
Additional Information
- 30% increase in power and thermal performance: unlocks unmatched capabilities for superior performance
- 3-speed settings with variable speed trigger best suited for numerous applications
- Versatile outdoor power equipment system, powered by a single power head
- Delivers the capability to swap between multiple attachments to complete a wide range of applications
- Full throttle in under 1 second for immediate power delivery
- Adjustable auxiliary handle, strap and carrying ring help set the tool up for the optimum user comfort and control
- Flexible battery system: works with all MILWAUKEE M18 batteries
- The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE's POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power, run time and durability
ONLY
£403.45
£403.45
Part number: 4933446216
Important compatibility info
| Title | M18 Battery Blower Bare Unit |
Additional Information
M18 BBL-0 M18 battery blower
- Versatile attachments nozzle extension (228.6 mm) universal inflator/deflator attachment
- Flexible battery system: works with all MILWAUKEE M18 batteries
- Lock-on switch
- Removable nozzle for easy convenient storage
- Compact body clears dirt and debris in tight spaces
- Power control 3 speed settings with variable speed trigger
ONLY
£101.71
£101.71
Part number: 4932860932
Important compatibility info
ONLY
£61.17
£61.17
Part number: 4932500041
Important compatibility info
Additional Information
- Tool free blade change for changing blades up to 10x faster.
- Compact design, ideal for versatile cutting in tight spaces.
- Adjustable blade length for easier flush cutting.
- Rubber overmold grip for increased comfort.
- Accepts 12″ blades.
- Supplied with 10″ / 24 Tpi blade.
ONLY
£21.26
£21.26
Part number: 4932499471
Important compatibility info
Additional Information
- HOOK AND PICK SET 4PC
ONLY
£44.69
£44.69
Part number: 4932499410
Important compatibility info
Additional Information
- Adapter to be able to use conventional sockets with ¼″, ⅜″ or ½″ tool reception.
- Locking mechanism for a firm hold in the tool head.
- Compatible with M12 FUEL INSIDER pass-through ratchet.
ONLY
£25.15
£25.15
Part number: 4932499365
Important compatibility info
Additional Information
- Form-fitting, lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
- Flexible material allows for easy install and removal.
- Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.
- Not for use on or near live electrical circuits.
- Use on any other product than advised may result in damage to tool motor and may void tool warranty.
ONLY
£35.71
£35.71
Part number: 4932499025
Important compatibility info
Additional Information
- 3 crimping cavities to crimp multiple size connectors with one tool. Red (0.3 - 1.0mm² ), blue (1.5 - 2.5mm²) and yellow (4.0 - 6.0mm²).
- Dual-ratcheting action provides a full, complete crimp that ensures secure connections.
- High-contrast color-coded markings provides better visibility.
- Quick-release lever for increased productivity.
- Ergonomic handle designed with comfort grips that will not peel.
ONLY
£112.04
£112.04
Part number: 4932498799
Important compatibility info
Additional Information
- FOUR FLAT sides on socket deter rolling.
- Wrench ready FOUR FLAT sides.
- Stamped sizes for easy visibility.
- Chrome finish for easy cleaning and corrosion protection.
- Stored on a socket rail for better tool organization.
ONLY
£89.40
£89.40
Part number: 4932498798
Important compatibility info
Additional Information
- FOUR FLAT sides on socket deter rolling.
- Wrench ready FOUR FLAT sides.
- Stamped sizes for easy visibility.
- Chrome finish for easy cleaning and corrosion protection.
- Available sizes: 12-24mm.
- Available sets: 13pc.
ONLY
£122.04
£122.04
Part number: 4932498797
Important compatibility info
Additional Information
- FOUR FLAT sides on socket deter rolling.
- Wrench ready FOUR FLAT sides.
- Stamped sizes for easy visibility.
- Chrome finish for easy cleaning and corrosion protection.
- Available sizes: 12-24mm.
- Available sets: 13pc.
ONLY
£81.63
£81.63
Part number: 4932498796
Important compatibility info
Additional Information
- FOUR FLAT sides on socket deter rolling.
- Wrench ready FOUR FLAT sides.
- Stamped sizes for easy visibility.
- Chrome finish for easy cleaning and corrosion protection.
- Available sizes: 8-19mm.
- Available sets: 12pc.
ONLY
£73.85
£73.85
Part number: 4932498795
Important compatibility info
Additional Information
- FOUR FLAT sides on socket deter rolling.
- Wrench ready FOUR FLAT sides.
- Stamped sizes for easy visibility.
- Chrome finish for easy cleaning and corrosion protection.
- Available sizes: 8-19mm.
- Available sets: 12pc.
ONLY
£73.85
£73.85
Part number: 4932498770
Important compatibility info
Additional Information
- Standout: Measure distances in the air of up to 4.5 m.
- Straighter stiffer blade for more precise measurement of long distances in the air.
- Blade width of 30 mm ensures blade stability and stiffness.
- Smoothest blade retraction with more speed and less blade rollover.
- Finger-Stop feature for quick, controlled retraction of the blade.
- Highest blade durability with Double-Sided Anti-Tear coating for the first 15 cm of the blade.
- Impact resistant body for the toughest conditions on the job site.
- Double-Sided printing with vertical and horizontal scale for versatile measurements.
- Architectural scale to measure scaled drawings, such as blueprints.
- Strong magnetic hook for maximum holding power.
- Available lengths: 5m, 5m/16ft, 8m, 8m/26ft.
ONLY
£26.60
£26.60
Part number: 4932498751
Important compatibility info
ONLY
£128.42
£128.42
Part number: 4932498750
Important compatibility info
ONLY
£131.62
£131.62
Part number: 4932498677
Important compatibility info
Additional Information
- T-STRIKE provides a striking cap for protection to the tool itself and better access to rounded or rusted bolts, while having an all-metal core for extra-durability.
- Hex ball end on the long side allows 30°access to any hex screw.
- Quick and easy size identification with markings on the tool and on the storage holder.
- Magnetic storage tray with pre-drilled holes for best and easy organization in the workshop.
ONLY
£129.66
£129.66
Part number: 4932498607
Important compatibility info
Additional Information
- UNIVERSAL fitting to all angle grinders from 115 - 230mm.
- Suitable for grinders with automatic / rapid braking systems.
- Tool free disc changing in 12 seconds – NO tools required.
- Only 8mm thick: allowing for more disc surface and for improved use in restricted areas.
- Integrated keyholes for removing the nut with a standard spanner in case of over tightening during operation.
ONLY
£13.97
£13.97
Part number: 4932498382
Important compatibility info
Additional Information
- Better access
- Unique FOUR FLAT sides
- Flexible head design spanner
- MILWAUKEE ratchet with 90 ratcheting teeth for only 4° of arc swing and stubby handle design for better access.
- FOUR FLAT sides on socket deter rolling and wrench-ready design.
- Flex head ratcheting spanner with 144 tooth count providing an arc swing of 2.5° allowing access in tighter spaces.
- SHOCKWAVE IMPACT DUTY Screwdriver bits
ONLY
£174.88
£174.88
Part number: 4932498381
Important compatibility info
| Title | 1/4in. Ratchet Driver Socket Set 38pc |
Additional Information
1/4in. Ratchet Driver Socket Set 38pc
- SHOCKWAVE™ IMPACT DUTY Screwdriver bits
- Comfortable Tri-Lobe screwdriver handle optimised for maximum user comfort and high torque applications.
- Sockets are stamped with measurements on the flat side for easy-to-read visibility.
- FOUR FLAT™ sides on socket deter rolling.
- 90 tooth design with 4 °of arc swing for tight work spaces.
ONLY
£109.19
£109.19
Part number: 4932498267
Important compatibility info
Additional Information
- 3 in 1 combination HSS-G drill bit: drilling, threading and deburring in one single operation.
- Suitable for use with battery powered or corded drills.
- Reception: ¼″ hex, E6.3.
- Impact rated : suitable for use with cordless impact drivers when keeping to recommended drilling speed.
- Thread type: metric ISO-thread DIN 13.
- Suitable for drilling in plastics, sheet steel and non-alloyed material up to 800 N/mm².
- Always use a suitable cutting oil.
ONLY
£95.47
£95.47
Part number: 4932498201
Important compatibility info
| Title | 1Pc Thin Metal Cutting Disc Pro+ SCS42 125x0.8mm |
Additional Information
Thin Metal Cutting Disc Pro+ SCS42 125x0.8mm-1pc
- *Orders are only possible in master carton (with 50 x 4932498201). Minimum order quantity is 50 x 4932498201 (=1 master carton). Order quantities greater than 50 pcs are to be ordered in multiples of 50 pcs (ie. 100, 150, 200...).
- Characteristics: Pro+ technology for best lifetime: Hydro-protected against moisture for longer lasting power. Greater performance and longer runtime than the 1 mm pro+ and therefore cordless optimised. Lower material loss, less sparks. Made in Germany.
- Most suitable for stainless and acid-resistant steel, hardox, heat-resistant cast steel, spring steel, mild and tool steel.
ONLY
£5.61
£5.61
Part number: 4932498179
Important compatibility info
Additional Information
- 3 SHOCKWAVE IMPACT DUTY flip nut drivers with 7, 8, 10, 12, 13 and 17mm.
- Designed to hold more nut drivers in one solution.
- Shank and nut drivers compatible with impact drivers.
- Magnetic SHOCKWAVE IMPACT DUTYshank.
- On shank storage for easy access.
- Anti-peel cushion grip provides the best ergonomics.
- Available sizes: 6-in-1, 9-in-1.
ONLY
£41.21
£41.21
Part number: 4932498176
Important compatibility info
| Title | 27 in 1 Precision Multi-Bit Screwdriver |
Additional Information
27 in 1 Precision Multi-Bit Screwdriver
- The 39 in 1 precision multi-bit screwdriver features a dual-length shank providing a compact and a standard size. Supplied in a durable PACKOUT™ compatible case designed to get the bits out easily.
- On-board bit storage with double-sided bits in the 4 in 1 Torx precision multi-bit screwdriver and the 27 in 1 precision multi-bit screwdriver for a quick bit switching.
- 360° rotating back cap, giving greater control for speed and precision and optimised for any kind of maintenance applications.
ONLY
£44.84
£44.84
Part number: 4932493960
Important compatibility info
| Title | 1Pc 1/4Dr Drive Spinner Handle |
Additional Information
¼in. Drive Spinner Handle -1pc
- Lanyard hole for easy attachment to the Milwaukee safety range to allow use at heights.
- Ball detent for a secure hold onto sockets.
- Anti-roll protection due to TRI-LOBE design.
- Ergonomically shaped TRI-LOBE handle design to comfortable apply high torque.
ONLY
£15.69
£15.69
Part number: 4932493870
Important compatibility info
| Title | 25Pc Thunderweb HSS-Ground set |
Additional Information
Thunderweb HSS-Ground set -25pc
- Accepts higher feed pressure and torque equalling less breakages.
- Impact resistant ABS case with added rubber corner protection.
- Polished finish reduces friction and extends drill bit life.
- 135° Split point - Precision starting, drill bit won't walk on material surface.
- Flute geometry - THUNDERWEB flute form ejects hot chips rapidly. Dissipates heat better increasing life time.
- Parabolic web cross section: Large web thickness. Strength built in.
- THUNDERWEB design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the THUNDERWEB core is thicker than that of
ONLY
£106.08
£106.08
Part number: 4932493869
Important compatibility info
| Title | HSS-G THUNDERWEB 19PC METAL DRILL SET |
Additional Information
- Kit includes: 1 x 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5 and 10mm
- Thunderweb metal drill bits have a conical shaped web which gets thicker towards the back of the drill bit making them more durable
- 135 degree point angle with split point for precision drilling
- Supplied in a Packout compatible case
- 4932493869
ONLY
£50.05
£50.05
Part number: 4932493868
Important compatibility info
| Title | RED COBALT HSS-Ground set (25pc) |
Additional Information
RED COBALT HSS-Ground set (25pc)
- Colour: bronze.
- 3-flat shank from ⌀ 5 mm for better grip and prevents chuck slippage.
- Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
- Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
- QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
- Suitable for drilling high alloy content steels and metals with tensile strengths over 1000 N/mm² like stainless steel.
- Metal drill bits ground from solid, extremely heat resistant 5% cobalt-alloyed high speed steel produced according to DIN 338.
ONLY
£153.00
£153.00
Part number: 4932493867
Important compatibility info
| Title | RED COBALT HSS-Ground set (19pc) |
Additional Information
RED COBALT HSS-Ground set (19pc)
- Colour: bronze.
- 3-flat shank from ⌀ 5 mm for better grip and prevents chuck slippage.
- Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
- Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
- QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
- Suitable for drilling high alloy content steels and metals with tensile strengths over 1000 N/mm² like stainless steel.
- Metal drill bits ground from solid, extremely heat resistant 5% cobalt-alloyed high speed steel produced according to DIN 338.
ONLY
£65.72
£65.72
Part number: 4932493866
Important compatibility info
| Title | 19Pc Shockwave HSS-G Tin Red Hex Set |
Additional Information
Shockwave HSS-G Tin Red Hex Set -19pc
- Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
- Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
- QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
- Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
- Impact rated drill bit with ¼″ hex shank optimised for impact drivers.
ONLY
£76.67
£76.67
Page 4 of 42
Workshop Tools
