Proud to be a UK-based company
Contact usWorkshop Tools
Categories
Brand:
Select Brand
invoice Page 10 of 104
Results 181 - 200 of 2077
Part number: 4932498798
Important compatibility info
Additional Information
- FOUR FLAT sides on socket deter rolling.
- Wrench ready FOUR FLAT sides.
- Stamped sizes for easy visibility.
- Chrome finish for easy cleaning and corrosion protection.
- Available sizes: 12-24mm.
- Available sets: 13pc.
ONLY
£122.04
£122.04
Part number: 4932498797
Important compatibility info
Additional Information
- FOUR FLAT sides on socket deter rolling.
- Wrench ready FOUR FLAT sides.
- Stamped sizes for easy visibility.
- Chrome finish for easy cleaning and corrosion protection.
- Available sizes: 12-24mm.
- Available sets: 13pc.
ONLY
£81.63
£81.63
Part number: 4932498796
Important compatibility info
Additional Information
- FOUR FLAT sides on socket deter rolling.
- Wrench ready FOUR FLAT sides.
- Stamped sizes for easy visibility.
- Chrome finish for easy cleaning and corrosion protection.
- Available sizes: 8-19mm.
- Available sets: 12pc.
ONLY
£73.85
£73.85
Part number: 4932498795
Important compatibility info
Additional Information
- FOUR FLAT sides on socket deter rolling.
- Wrench ready FOUR FLAT sides.
- Stamped sizes for easy visibility.
- Chrome finish for easy cleaning and corrosion protection.
- Available sizes: 8-19mm.
- Available sets: 12pc.
ONLY
£73.85
£73.85
Part number: 4932498770
Important compatibility info
Additional Information
- Standout: Measure distances in the air of up to 4.5 m.
- Straighter stiffer blade for more precise measurement of long distances in the air.
- Blade width of 30 mm ensures blade stability and stiffness.
- Smoothest blade retraction with more speed and less blade rollover.
- Finger-Stop feature for quick, controlled retraction of the blade.
- Highest blade durability with Double-Sided Anti-Tear coating for the first 15 cm of the blade.
- Impact resistant body for the toughest conditions on the job site.
- Double-Sided printing with vertical and horizontal scale for versatile measurements.
- Architectural scale to measure scaled drawings, such as blueprints.
- Strong magnetic hook for maximum holding power.
- Available lengths: 5m, 5m/16ft, 8m, 8m/26ft.
ONLY
£26.60
£26.60
Part number: 4932498751
Important compatibility info
ONLY
£128.42
£128.42
Part number: 4932498750
Important compatibility info
ONLY
£131.62
£131.62
Part number: 4932498677
Important compatibility info
Additional Information
- T-STRIKE provides a striking cap for protection to the tool itself and better access to rounded or rusted bolts, while having an all-metal core for extra-durability.
- Hex ball end on the long side allows 30°access to any hex screw.
- Quick and easy size identification with markings on the tool and on the storage holder.
- Magnetic storage tray with pre-drilled holes for best and easy organization in the workshop.
ONLY
£129.66
£129.66
Part number: 4932498607
Important compatibility info
Additional Information
- UNIVERSAL fitting to all angle grinders from 115 - 230mm.
- Suitable for grinders with automatic / rapid braking systems.
- Tool free disc changing in 12 seconds – NO tools required.
- Only 8mm thick: allowing for more disc surface and for improved use in restricted areas.
- Integrated keyholes for removing the nut with a standard spanner in case of over tightening during operation.
ONLY
£13.97
£13.97
Part number: 4932498382
Important compatibility info
Additional Information
- Better access
- Unique FOUR FLAT sides
- Flexible head design spanner
- MILWAUKEE ratchet with 90 ratcheting teeth for only 4° of arc swing and stubby handle design for better access.
- FOUR FLAT sides on socket deter rolling and wrench-ready design.
- Flex head ratcheting spanner with 144 tooth count providing an arc swing of 2.5° allowing access in tighter spaces.
- SHOCKWAVE IMPACT DUTY Screwdriver bits
ONLY
£174.88
£174.88
Part number: 4932498381
Important compatibility info
| Title | 1/4in. Ratchet Driver Socket Set 38pc |
Additional Information
1/4in. Ratchet Driver Socket Set 38pc
- SHOCKWAVE™ IMPACT DUTY Screwdriver bits
- Comfortable Tri-Lobe screwdriver handle optimised for maximum user comfort and high torque applications.
- Sockets are stamped with measurements on the flat side for easy-to-read visibility.
- FOUR FLAT™ sides on socket deter rolling.
- 90 tooth design with 4 °of arc swing for tight work spaces.
ONLY
£109.19
£109.19
Part number: 4932498267
Important compatibility info
Additional Information
- 3 in 1 combination HSS-G drill bit: drilling, threading and deburring in one single operation.
- Suitable for use with battery powered or corded drills.
- Reception: ¼″ hex, E6.3.
- Impact rated : suitable for use with cordless impact drivers when keeping to recommended drilling speed.
- Thread type: metric ISO-thread DIN 13.
- Suitable for drilling in plastics, sheet steel and non-alloyed material up to 800 N/mm².
- Always use a suitable cutting oil.
ONLY
£95.47
£95.47
Part number: 4932498201
Important compatibility info
| Title | 1Pc Thin Metal Cutting Disc Pro+ SCS42 125x0.8mm |
Additional Information
Thin Metal Cutting Disc Pro+ SCS42 125x0.8mm-1pc
- *Orders are only possible in master carton (with 50 x 4932498201). Minimum order quantity is 50 x 4932498201 (=1 master carton). Order quantities greater than 50 pcs are to be ordered in multiples of 50 pcs (ie. 100, 150, 200...).
- Characteristics: Pro+ technology for best lifetime: Hydro-protected against moisture for longer lasting power. Greater performance and longer runtime than the 1 mm pro+ and therefore cordless optimised. Lower material loss, less sparks. Made in Germany.
- Most suitable for stainless and acid-resistant steel, hardox, heat-resistant cast steel, spring steel, mild and tool steel.
ONLY
£5.61
£5.61
Part number: 4932498179
Important compatibility info
Additional Information
- 3 SHOCKWAVE IMPACT DUTY flip nut drivers with 7, 8, 10, 12, 13 and 17mm.
- Designed to hold more nut drivers in one solution.
- Shank and nut drivers compatible with impact drivers.
- Magnetic SHOCKWAVE IMPACT DUTYshank.
- On shank storage for easy access.
- Anti-peel cushion grip provides the best ergonomics.
- Available sizes: 6-in-1, 9-in-1.
ONLY
£41.21
£41.21
Part number: 4932493960
Important compatibility info
| Title | 1Pc 1/4Dr Drive Spinner Handle |
Additional Information
¼in. Drive Spinner Handle -1pc
- Lanyard hole for easy attachment to the Milwaukee safety range to allow use at heights.
- Ball detent for a secure hold onto sockets.
- Anti-roll protection due to TRI-LOBE design.
- Ergonomically shaped TRI-LOBE handle design to comfortable apply high torque.
ONLY
£15.69
£15.69
Part number: 4932493870
Important compatibility info
| Title | 25Pc Thunderweb HSS-Ground set |
Additional Information
Thunderweb HSS-Ground set -25pc
- Accepts higher feed pressure and torque equalling less breakages.
- Impact resistant ABS case with added rubber corner protection.
- Polished finish reduces friction and extends drill bit life.
- 135° Split point - Precision starting, drill bit won't walk on material surface.
- Flute geometry - THUNDERWEB flute form ejects hot chips rapidly. Dissipates heat better increasing life time.
- Parabolic web cross section: Large web thickness. Strength built in.
- THUNDERWEB design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the THUNDERWEB core is thicker than that of
ONLY
£106.08
£106.08
Part number: 4932493869
Important compatibility info
| Title | HSS-G THUNDERWEB 19PC METAL DRILL SET |
Additional Information
- Kit includes: 1 x 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5 and 10mm
- Thunderweb metal drill bits have a conical shaped web which gets thicker towards the back of the drill bit making them more durable
- 135 degree point angle with split point for precision drilling
- Supplied in a Packout compatible case
- 4932493869
ONLY
£50.05
£50.05
Part number: 4932493868
Important compatibility info
| Title | RED COBALT HSS-Ground set (25pc) |
Additional Information
RED COBALT HSS-Ground set (25pc)
- Colour: bronze.
- 3-flat shank from ⌀ 5 mm for better grip and prevents chuck slippage.
- Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
- Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
- QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
- Suitable for drilling high alloy content steels and metals with tensile strengths over 1000 N/mm² like stainless steel.
- Metal drill bits ground from solid, extremely heat resistant 5% cobalt-alloyed high speed steel produced according to DIN 338.
ONLY
£153.00
£153.00
Part number: 4932493867
Important compatibility info
| Title | RED COBALT HSS-Ground set (19pc) |
Additional Information
RED COBALT HSS-Ground set (19pc)
- Colour: bronze.
- 3-flat shank from ⌀ 5 mm for better grip and prevents chuck slippage.
- Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
- Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
- QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
- Suitable for drilling high alloy content steels and metals with tensile strengths over 1000 N/mm² like stainless steel.
- Metal drill bits ground from solid, extremely heat resistant 5% cobalt-alloyed high speed steel produced according to DIN 338.
ONLY
£65.72
£65.72
Part number: 4932493866
Important compatibility info
| Title | 19Pc Shockwave HSS-G Tin Red Hex Set |
Additional Information
Shockwave HSS-G Tin Red Hex Set -19pc
- Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
- Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
- QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
- Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
- Impact rated drill bit with ¼″ hex shank optimised for impact drivers.
ONLY
£76.67
£76.67
Page 10 of 104
Workshop Tools
