Workshop Tools

• Flexible battery system: works with all MILWAUKEE M12 batteries
• Bright LED light for increased visibility of soldering application
• Temperature monitoring to maintain heat throughout tough applications
• Dual colour LED lights to notify user: flashing green when tool is heating up solid green when the tool is ready for operation and solid red when the tool is off but the tip is hot to touch until the red LED turns off
• Tool free replaceable tips
• 3 locking head positions to work in multiple orientations 0° 45° 90°
• Quick heat up time: the tool is ready to use in 20 30 seconds

• Includes AFG4 0-140 psi & 0-9.6 bar 0.53m Hose SCO Connector
• Accuracy Standards - Tested to over 400,000 cycles at 100% accuracy, meets EC 86/217 and compliant with EN12645:2015
• Piston & Seal Design - New design, less drag, reduced friction & less movement inertia means no internal corrosion, no sticking and no skewing of accuracy
• Valve Mechanism - Simplified 2 stage mechanism design prevents user having to in.pushin. against full line pressure on deflate preventing fatigue
• Biomorphic Shape - Ergonomic, easier to use and less prone to damage when dropped
• Lighter Weight - Gauge body weighs 923g, less work strain and easier for repetitive use
• AIRFORCE® MK4 Tyre Inflator is robust and highly accurate, offering leading inflation and deflation rates and high performance for both indoor and outdoor applications

• Accuracy: Meets EC 86/217 Compliant with EN12645:2014 Reading Accuracy: 0.1 bar / 2 psi Maximum Inlet Pressure: 13.8 bar / 200 psi Inflation Flow: 500 l/min / 18 cfm Operating temperature: -25 to 55 °C Hose Length: 0.53 m / 21 in Tyre Valve Connection: Single clip-on Calibration: 0-138 psi / 0-9.6 bar

• For use on Lambda sensors (oxygen sensors) on most modern cars This tool covers a wide variety of options and fits most heated and non-heated sensors
• Sizes: 1/2in.D: 29mm x 90mm long, 27mm x 85mm long, 22mm x 50mm long, 3/8in.D: 11/16in. x 74mm long, 22mm (7/8in.) x 80mm long, 22mm (7/8in.) x 90mm long, 22mm (7/8in.) x 30mm long
• Suitable for most modern cars including: Audi, BMW, Citroën, Ford, Mercedes-Benz, Peugeot, Renault, Skoda, Vauxhall, Volkswagen
• Manufactured from Chrome Molybdenum

• Lanyard hole for easy attachment to the Milwaukee safety range to allow use at heights.
• Gripping zone with integrated wire bender for flat and round material.
• Two component handle design for comfortable handling and ergonomic grip.
• Grey titanium surface finish is non reflective and ensures maximum corrosion resistance.
• Induction hardened cutting edges to cut even the hardest of materials.
• Integrated ring spanner to tighten or untighten metric bolts (M8 to M10).
• Precision machined joint for maximum power transmission with optimum leverage for easy and effortless work.

General Information

Diesel Injector Remover - VAG TDi

• No solenoid removal required
• Use in accordance with OEM instructions
• Equivalent to: OEM T10402, T10415
• Engines: 1.6L TDi CR diesel & 2.0L TDi
• Applications: Volkswagen Golf 2009, Seat Ibiza 2008, Altea 2009, Leon 2009, Altea XL 2009, Altea Freetrack 2009, Toledo 2013 and Audi A3 2009/2013
• Diesel injector remover for VAG vehicles fitted with 1.6 & 2.0 CR TDi engines

• Protected against splashing water at all angles (IP24)
• 2 hooks for hanging
• High powered 2.1A USB charger charges tablets, smart phones, MP3 players and other electronic devices
• Best-in-class performance - outstanding light output 400+ lumens, designed to illuminate large areas
• TRUEVIEW™ high definition lighting
• Job site durability - rugged designed with impact resistant lens to withstand abusive job site conditions
• 180° - 360° adjustable beam - versatile design, allows the user to select between area lighting and task lighting
• Flexible battery system: works with all MILWAUKEE® M12™ batteries

General Information

Timing Tools - VAG 3cyl 6/12 valve. Timing Tools - VAG 3cyl 6/12 valve

• 6v/12v 12v tools are OEM T10123 x2 and T10121x1 with AZQ/BME Engine codes and 6v require T10120x1 and T1021x1 for AWY/BMD engine codes
• 2 and 3 cylinder
• Timing tools for Volkswagen Lupo and Polo 1.2 litre engines

• Textured nose maintains control when grabbing and twisting with serrated nose.
• Single-joint grip force for more control and better grip compared to double joint.
• Multi-function gripping zones for grabbing a wide variety of materials such as screws, cables and round parts.
• Deep-reach cross handles for increased reach in tight spaces for best access.

• Can be used in situ no need to remove trailing link assembly from vehicle.
• Remove/install Fiesta IV rear axle mounting bushes.

• High quality hot-forging process provides a performance exceeding ASME standard
• Full popular range of metric sizes fits most circumstances
• High visibility colour filled size mark for easy identification during use
• Premium Chrome Finish
• 15 degree offset box end
• Anti-Slip and radius corners on open end

• ASME Compliant

• 36 teeth ratcheting mechanism allows for finer adjustments and greater precision when tightening or loosening fasteners compared to wrenches with fewer teeth
• Torque range allows for a high degree accuracy and percision over full range
• Handle provides strong, durable and comfortable hand hold
• Allows for smooth actuation
• New Thrust Bearing System for smooth handle torque adjustments
• 45 teeth gear system
• Aggressive grip
• Recessed switch plate

• 45 teeth gear systemTorque range: 25 - 250 ft lbs
• 50 TO 250LBF.FT
• 67 TO 338Nm

• 72-tooth ratchet allows the user to rotate with a smaller movement of the handle
• High torque accuracy allows for high degree of precision in working conditions
• Handle provides strong, durable and comfortable hand hold
• Two Way Click Design creates a a more versitle tool that can perform multiple functions
• 45 Teeth Round Head
• Durable Anodized Aluminum Handle
• Two Way Click Design (Clockwise / Counter Clockwise)

• 45 Teeth Round HeadTorque Accuracy CW: +/- 4% - CCW: +/- 6%
• 50 to 250Lbf.ft
• 67 to 338Nm

General Information

Engine Timing Tool Kit - Alfa Romeo/Fiat Multiair. Engine Timing Tool Kit - Alfa Romeo/Fiat Multiair

• Fiat Punto Evo/Punto/ Bravo 2009-2013 with engine codes 198A7.000/955A6.000, Lancia Delta 2010-2013 with engine code 955A7.000
• Applications: Alfa Romeo Mito/Giulietta Multiair105/Multiair Turbo135/163/170 from 2009-2013 with engine code/955A6.000/955A2.000/955A7.000/955A8.000/940A2.000
• Supplied in metal storage case with instructions and application list

• All-chrome shafts for increased durability.
• Comfortable Tri-Lobe handles for better grip.
• Hammer-ready strike cap improves leverage when working in tight and tricky spaces.
• All-metal core for improved durability.
• I-Beam design for added durability.
• Curved claw design reduces damage when pulling nails.

• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.

• Over molded handle for more control and better grip.
• Steel reinforced handle for higher durability.
• Durable metal faces preventing chipping on contact.
• Precision balanced design and steel shot-filled head for optimised control.

• Special tool steel
• Applicable to NCCJ500 and CTRNSJ500K
• Suitable for transmission jacks with mounting diameter of 30 mm
• Locking bracket for holding the strut securely
• Prevents the suspension strut from lowering when working on the axle
• Ideal for supporting the suspension strut
• Universal

• Can also be used on cooling systems hoses.
• Features a pressure gauge with shut off valve and pressure release valve.
• Kit supplied with 8 stepped adaptors to fit most hose sizes.
• Used in conjunction with an air line to show the presence of leaks
• sizes; 35 to 95mm

• Citroën: Relay/Jumper III (06-14), Relay/Jumper III (14-): Fiat: Ducato (06-12), Ford: Focus ('98), Mondeo (00), Ranger ('12), Tourneo Custom, Transit ('06), Transit ('14), Transit (00), Transit Custom Jaguar: X-Type (X400)(01-10), Land Rover: Defender, LDV: Convoy, LTI: TXII (02-06), Mazda: BT-50 (UP)(12-), Peugeot: Boxer III (06-14), Boxer III (14-)
• Equivalent to OE reference: 303-682, LDV177, 303-679A, LDV170, 3003-1587, 0198.N, 2.000.018.700, 0198.B2, 2.000.016.500, LDV167, 0198.J, 303-698, 303-675, 303-1562
• ABFA, D3FA, D5BA, D6BA, F3FA, FIFA, FMBA, FMBB, HJBA, HJBB, HJBC, HJBE, N7BA, N7BB, SDBA, CVF5, CVFF, CVR5, CVRA, CVRB, CYF5, CYFA, CYFB CYFC, CYFF, CYFG, CYR5, DRF5, DRFA, DRFB, DRFC, DRFF, DRFG, DRR5, DRRA, DRRB, GBVAJ(QW2R), GBVAJPF, GBVAJQW, MZ-CD, P8FA, P8FB, PGFA PGFB, QJBA, QJBB, QJBC, QJBD, QVFA, QWFA, SRFA, SRFB, SRFC, SRFD, SRFE, UHFA, UHFB, UHR5, USR6, USRA, USRB, UYR6, 4HG, 4HG (P22DTE), 4HH 4HH (P22DTE), 4HJ, 4HJ (P22DTE), 4HM, 4HM (P22DTE), 4HU, 4HU (P22DTE), 4HV, 4HV (P22DTE), BG, CRFF, CVF5, CVFF, CVR5, CVRA, CVRB, CYF5, CYFA, CYFB CYFC, CYFF, CYFG, CYR5, CYRA, CYRB, DRF5, DRFA, DRFB, DRFC, DRFG, DRR5, DRRA, DRRB, GBVAJ(QW2R), GBVAJPF, GBVAJQJ, GBVAJQJ (QJ2R), GBVAJQJ (QJ2S) GBVAJQJ (QJ2W), GBVAJQW, GBVAJQW (QW2S), GBVAJQW (QW2W), ID4/DT224, MZ-CD, P22DTE, P22DTE (4HG), P22DTE (4HH), P22DTE (4HJ), P22DTE (4HM) P22DTE (4HU), P22DTE (4HV), P8FA, P8FB, PGFA, PGFB, QJ2R, QJ2S, QJ2W, QJBA, QJBA (BG), QJBB, QJBC, QJBD, QVFA, QW2S, QW2W, QWFA, SRFA, SRFB, SRFC SRFD, SRFE, UHFA, UHFB, UHR5, USR6, USRA, USRB, UYR6, 244DT, D2FA, D2FB, D4FA, DOFA, F4FA, FXFA, H9FA, H9FB, H9FD, JXFA, JXFC, PD24P, PHFA, PHFC, ZSD 424 MZ-CD, SA2R, SA2S, SA2W, SAFA, SAFB
• C5279 contains the tools to enable the setting and locking of the engine to be undertaken during Timing Chain replacement and also the resetting of the position of the Crankshaft Sensor Carrier during Engine reassembly procedures.
• Citroën, Fiat, Ford, Jaguar, Land Rover, LDV, LTI, Mazda, Peugeot

• Slim profile head with flush direction lever offers better accessibility.
• 90 tooth design with 4 °of arc swing for tight work spaces.

• FOUR FLAT sides on socket deter rolling.
• Wrench ready FOUR FLAT sides.
• Stamped sizes for easy visibility.
• Chrome finish for easy cleaning and corrosion protection.
• Available sizes: 12-24mm.
• Available sets: 13pc.

• Flexible battery system: works with all MILWAUKEE® M18™ batteries
• Protected against splashing water at all angles (IP24)
• 2 adjustable metal hooks for hanging in vertical and horizontal position
• Pivoting 45° forward & backward head allows for 180° coverage
• TRUEVIEW™ high definition lighting
• Thanks to its compact design it operates in locations other lights cannot
• Three LED design with 2 light settings provides 300 lumens on High and 130 lumens on Low setting

• Standard and extended handle lengths for easier access in tight spaces or extra leverage.
• Slim profile head with flush direction lever offers better accessibility.
• Versatile lockable flex head: Switch between 11 locking positions and freely moving head.
• 90 tooth design with 4 degreeof arc swing for tight work spaces.

• Radius corner on working end provides higher torque and better gripping of fastener
• Chamfered drive opening allows a quicker connection between socket and fastener
• Mirror polish chrome-plated finish prevents rust
• Knurled teeth on bottom of socket improve grip when handling
• Chrome Vanadium Alloy Steel

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

General Information

Locking Tool Set - Diesel Engines. Locking Tool Set - Diesel Engines

• Ford TDDi, TDCi in 18 Fiesta Turbo, Focus, Transit
• For setting the timing chain see Part No 4173
• Includes locking strap, flywheel locking tool, TDC setting screw and camshaft sprocket puller
• Supplied in storage case

• Plastic Carry Case With Foam Inlay
• Includes Product Identification & Help Guide
• Fit & Remove TPMS Components With Ease
• Specialist TPMS Hand Tools Kit To Cover All Bases When Fitting & Removing Sensors
• Includes Low Limit Torque Wrench, TPMS Sealing Grommet Removal & Fitting Tool, Pre-Torqued Valve Core Tool, 11mm & 12mm Deep Sockets, Selection Of Torx Bits Presented In Plastic Case With Foam Inlay

General Information

High Voltage Floor Matting - 1 Metre. High Voltage Floor Matting - 1 Metre

• Ribbed on the underside fabric impression on upper side
• Tested to IEC611111 Class 2 rated for working voltages up to 17kV
• Flame retardant oil and acid resistant insulated floor matting

• Dimensions: Width 1000mm, Thickness 3.00mm, Weight 4.0kgs per metre

• .Supplied in carrycase.
• Includes straight and right angled quick connect couplings, nine adaptors, Orings and 890mm long hose.
• Accurately tests oil pump pressure and also low oil warning devices.

• Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
• Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
• QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
• Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
• Impact rated drill bit with ¼″ hex shank optimised for impact drivers.

• Finger squeeze protection at every position.
• Push button for quick and precise adjustments on the workpiece.
• Box-joint design provides highest durability and larger gripping capacity.
• Nail and wire holder.
• Induction hardened teeth with self-locking serration to not slipp on the workpiece.
• Double toothed jaw for maximum grip.

• Length: 14 11/16in. overall
• 32 teeth fixed head w/o quick release
• Torque accuracy CW: +/- 3%, comfort grip handle

• Internal blade storage for extra blades.
• Supplied with 12″ / 24 Tpi blade.
• Tough metal frame, supports higher tension (25,000 PSi / 250 lbs).
• Will accept up to 12″ blades.
• Overmould handle ensures secure grip and user comfort.

• Switch latch for constant power
• Automatic circuit breaker reset
• Auxiliary ground lead holder

• Voltage Detection Range: Detects low to high AC voltages
• Non-Contact Operation: Ensures safety during electrical testing
• LED Indicators: Provides visual feedback for voltage detection
• Compact Design: Small and lightweight for convenient use
• Frequency Compatibility: Operates at standard electrical frequencies
• Durability: Engineered for regular use with robust construction
• Battery Operated: Powered by alkaline batteries
• Compliance: Meets international electrical safety standards.

• Personalized Blowcase
• Gauge with 0.01mm Increments
• Shock-Proof Gauge
• Transverse Arm for Fine Adjustment
• Identifies Vertical and Lateral Wobble
• 3-Point Clamp Stand for Safe Mounting onto Shock Absorber
• Measures Radial and Axial Offsets on Brake Discs

• Equivalent to OE reference: EN-51367, EN-51632, EN-51298
• B10XE/L5Q, B10XFL/LE1, B10XFT/LE1, B10XHL/LE1, B10XL/LWT, D10XE/L5Q, D10XFL/LE1, D10XFT/LE1, B14XE/LV7, B14XFL/LE2, B14XFT/LE2 B14XHL/LE2, B14XHT/LE2, B14XNT/LFE, D14XFL/LE2, D14XFT/LE2, D14XNT/LFE, B15XHT/LFV, D15XHL/LFV, D15XHT/LFV
• C5287 contains the tools required to undertake the Valve Timing Check/ Engine Setting and Locking procedures on 1.0/1.4/1.5 Turbo and Naturally Aspirated Petrol Chain Engines fitted within Vauxhall/Opel applications.
• Vauxhall/Opel
• Adam (M13), Adam Rocks (M13), Astra-K (B16), Corsa-E (X15), Insignia-B (Z18), Insignia-B Country Tourer (Z18), Karl (C16), Karl Rocks (C16), Mokka X (J13) Viva (C16), Viva Rocks (C16)

• Solid and robust construction
• Hand trigger inflate and thumb controlled deflate
• Auto power off
• Backlight
• Long battery life with battery level indicator
• psi, bar kpa units of pressure selectable by button; last selection saved
• Powered by PCL inflation technology and experience
• Suitable for all applications including tyreshop environments
• Low and simple maintenance
• Easy and cost effective to use
• Reliable accuracy (+/- 1 psi up to 60 psi, then 2 psi up to 150 psi) with individual testing and certification
• Large, clear, easy to read LCD display with backlight

• Pressure Range: 5 - 170 psi / 0.34 - 12 bar / 34 - 1200 kPa Maximum Supply Pressure: 218 psi / 15 bar / 1500 kPa Inflation Flow: 910 l/min @ 13 bar supply Battery Life: 1000 hours with backlight off / 40 hours with backlight on Battery Type: 1 x CR2450 (supplied) Hose length: 1.8m Tyre Valve Connection: Euro Clip-on Calibration: 5-170 psi / 0.34-12 bar / 34-1200 kPa

• Flexible material allows for easy install and removal.
• Form-fitting lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.

• FOUR FLAT sides on socket deter rolling.
• Wrench ready FOUR FLAT sides.
• Stamped sizes for easy visibility.
• Chrome finish for easy cleaning and corrosion protection.
• Available sizes: 8-19mm.
• Available sets: 12pc.

• FOUR FLAT sides on socket deter rolling.
• Wrench ready FOUR FLAT sides.
• Stamped sizes for easy visibility.
• Chrome finish for easy cleaning and corrosion protection.
• Available sizes: 8-19mm.
• Available sets: 12pc.

• Recharges in sequence - first in, first to charge - resulting in less time needed to manage charging cycles
• M12™ REDLITHIUM™ 2.0 Ah / 3.0 Ah / 4.0 Ah / 6.0 Ah battery packs recharge in 26 min / 50 min / 52 min / 95 min or less
• M18™ REDLITHIUM™ 2.0 Ah / 4.0 Ah / 5.0 Ah battery packs recharge in 26 min / 52 min / 59 min or less
• Recharges all M18™, M14™ and M12™ REDLITHIUM™ battery packs