Workshop Tools

• Pack of 100
• Ideal for body shop use
• Height 76mm diameter 40mm
• Volume 60ml
• Leak protection in liner
• Built in brush

• Flexible battery system: works with all MILWAUKEE® M18™ batteries
• Protected against splashing water at all angles (IP24)
• 2 adjustable metal hooks for hanging in vertical and horizontal position
• Pivoting 45° forward & backward head allows for 180° coverage
• TRUEVIEW™ high definition lighting
• Thanks to its compact design it operates in locations other lights cannot
• Three LED design with 2 light settings provides 300 lumens on High and 130 lumens on Low setting

• Textured nose maintains control when grabbing and twisting with serrated nose.
• Single-joint grip force for more control and better grip compared to double joint.
• Multi-function gripping zones for grabbing a wide variety of materials such as screws, cables and round parts.
• Deep-reach cross handles for increased reach in tight spaces for best access.

• Designed for use with impact drivers the SHOCKWAVE™ IMPACT DUTY accessory line is not only ideal for heavy duty impact applications, but also delivers a full system solution for all the user's drilling and fastening needs.
• Laser hardened WEAR GUARD TIP™ for improved wear resistance and protection of the fit over the life of the bit.
• Custom engineered steel - Milwaukee® custom metal formula makes the SHOCKWAVE™ bits more resistant to shock from impacting.
• SHOCK ZONE™ reduces stress at the tip resulting in less tip breakages. The combination of the SHOCK ZONE™ design and special heat treatment absorbs impacts and allows the bit to flex with spring like action.
• SHOCK ZONE™ Geometry - designed to flex:

General Information

Engine Timing Tool Kit - VAG 1.2-1.4 TSI. Engine Timing Tool Kit - VAG 1.2-1.4 TSI

• Use with tensioner wrench Part No 6199
• Fitted to Audi A1, A3, Q3, Volkswagen Golf VII, Passat, SV, Sportsvan, Polo, Jetta, Seat, Leon, Leon ST, and Skoda Octavia III, Fabia III from 2012 onwards
• Application for late 1.2/1.4TSI four cylinder, petrol engines (for three cylinder engines please use Laser 6230)
• Parts of this kit are design registered
• Made in Sheffield
• Unique camshaft locking tool design, equivalent to OEM T10494

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Contents include 5 x 1/4in. Drive UJ Sockets: E4, E5, E6, E7, E8 x 40mm long
• 4 x 3/8in. Drive: E10, E12, E14, E16 x 60mm long
• Manufactured from Chrome Molybdenum
• Fully polished finish
• Supplied in EVA foam with clear lid

• Solid and robust construction
• Hand trigger inflate and thumb controlled deflate
• Auto power off
• Backlight
• Long battery life with battery level indicator
• psi, bar kpa units of pressure selectable by button; last selection saved
• Powered by PCL inflation technology and experience
• Suitable for all applications including tyreshop environments
• Low and simple maintenance
• Easy and cost effective to use
• Reliable accuracy (+/- 1 psi up to 60 psi, then 2 psi up to 150 psi) with individual testing and certification
• Large, clear, easy to read LCD display with backlight

• Pressure Range: 5 - 170 psi / 0.34 - 12 bar / 34 - 1200 kPa Maximum Supply Pressure: 218 psi / 15 bar / 1500 kPa Inflation Flow: 910 l/min @ 13 bar supply Battery Life: 1000 hours with backlight off / 40 hours with backlight on Battery Type: 1 x CR2450 (supplied) Hose length: 1.8m Tyre Valve Connection: Euro Clip-on Calibration: 5-170 psi / 0.34-12 bar / 34-1200 kPa

• Rounded tips to grab hoses without damaging these.
• Single-joint grip force for more control and better grip compared to double joint.
• Multi-function gripping zones for grabbing a wide variety of materials such as screws, cables and round parts.
• Deep-reach cross handles for increased reach in tight spaces for best access.

• Turn PACKOUT™ into stationary shop storage.
• Multiple mounting configurations.
• Organise your shop together with PACKOUT™ boxes and wall accessories.
• Metal reinforced mounting points for carrying high weights.
• Constructed with impact resistant polymers for highest durability.
• Connects to all MILWAUKEE® PACKOUT™ modular storage.

• Colour: bronze.
• 3-flat shank from ⌀ 5 mm for better grip and prevents chuck slippage.
• Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
• Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
• QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
• Suitable for drilling high alloy content steels and metals with tensile strengths over 1000 N/mm² like stainless steel.
• Metal drill bits ground from solid, extremely heat resistant 5% cobalt-alloyed high speed steel produced according to DIN 338.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Durable socket rail for long-term storage.
• Stamped sizes for better visibility in all lighting conditions.
• Single forged piece adds durability in high torque applications.
• Slim design for better access in tight spaces.
• FOUR FLAT™ sides on socket deter rolling and provide a wrench-ready design.

• Over molded handle for more control and better grip.
• Steel reinforced handle for higher durability.
• Durable metal faces preventing chipping on contact.
• Precision balanced design and steel shot-filled head for optimised control.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Corrosion resistant & non-magnetic
• The double-faced head is a cast barrel shape offering maximum striking surface while enhancing balance
• Shock reducing cushion grips minimize vibration & provide a non-slip grip while maximizing comfort when striking
• Non-Marring: Helps reduce impact and helps reduce work damage where surface protection is critical
• Non-sparking: For safe use near combustible materials