Workshop Tools

General Information

Diesel Injector Puller

• Saves time and money when injectors are difficult to remove
• Incorporating a slide hammer
• Presented in a handy blow mould case
• Diesel Injector Puller with M8/M12/M14 adaptors Assists removal of stubborn Bosch and Lucas diesel injectors

• Textured nose maintains control when grabbing and twisting with serrated nose.
• Single-joint grip force for more control and better grip compared to double joint.
• Multi-function gripping zones for grabbing a wide variety of materials such as screws, cables and round parts.
• Deep-reach cross handles for increased reach in tight spaces for best access.

• Can be used in situ no need to remove trailing link assembly from vehicle.
• Remove/install Fiesta IV rear axle mounting bushes.

• High quality hot-forging process provides a performance exceeding ASME standard
• Full popular range of metric sizes fits most circumstances
• High visibility colour filled size mark for easy identification during use
• Premium Chrome Finish
• 15 degree offset box end
• Anti-Slip and radius corners on open end

• ASME Compliant

• 36 teeth ratcheting mechanism allows for finer adjustments and greater precision when tightening or loosening fasteners compared to wrenches with fewer teeth
• Torque range allows for a high degree accuracy and percision over full range
• Handle provides strong, durable and comfortable hand hold
• Allows for smooth actuation
• New Thrust Bearing System for smooth handle torque adjustments
• 45 teeth gear system
• Aggressive grip
• Recessed switch plate

• 45 teeth gear systemTorque range: 25 - 250 ft lbs
• 50 TO 250LBF.FT
• 67 TO 338Nm

• 72-tooth ratchet allows the user to rotate with a smaller movement of the handle
• High torque accuracy allows for high degree of precision in working conditions
• Handle provides strong, durable and comfortable hand hold
• Two Way Click Design creates a a more versitle tool that can perform multiple functions
• 45 Teeth Round Head
• Durable Anodized Aluminum Handle
• Two Way Click Design (Clockwise / Counter Clockwise)

• 45 Teeth Round HeadTorque Accuracy CW: +/- 4% - CCW: +/- 6%
• 50 to 250Lbf.ft
• 67 to 338Nm

• All-chrome shafts for increased durability.
• Comfortable Tri-Lobe handles for better grip.
• Hammer-ready strike cap improves leverage when working in tight and tricky spaces.
• All-metal core for improved durability.
• I-Beam design for added durability.
• Curved claw design reduces damage when pulling nails.

• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.

• Over molded handle for more control and better grip.
• Steel reinforced handle for higher durability.
• Durable metal faces preventing chipping on contact.
• Precision balanced design and steel shot-filled head for optimised control.

• Special tool steel
• Applicable to NCCJ500 and CTRNSJ500K
• Suitable for transmission jacks with mounting diameter of 30 mm
• Locking bracket for holding the strut securely
• Prevents the suspension strut from lowering when working on the axle
• Ideal for supporting the suspension strut
• Universal

• Can also be used on cooling systems hoses.
• Features a pressure gauge with shut off valve and pressure release valve.
• Kit supplied with 8 stepped adaptors to fit most hose sizes.
• Used in conjunction with an air line to show the presence of leaks
• sizes; 35 to 95mm

• Citroën: Relay/Jumper III (06-14), Relay/Jumper III (14-): Fiat: Ducato (06-12), Ford: Focus ('98), Mondeo (00), Ranger ('12), Tourneo Custom, Transit ('06), Transit ('14), Transit (00), Transit Custom Jaguar: X-Type (X400)(01-10), Land Rover: Defender, LDV: Convoy, LTI: TXII (02-06), Mazda: BT-50 (UP)(12-), Peugeot: Boxer III (06-14), Boxer III (14-)
• Equivalent to OE reference: 303-682, LDV177, 303-679A, LDV170, 3003-1587, 0198.N, 2.000.018.700, 0198.B2, 2.000.016.500, LDV167, 0198.J, 303-698, 303-675, 303-1562
• ABFA, D3FA, D5BA, D6BA, F3FA, FIFA, FMBA, FMBB, HJBA, HJBB, HJBC, HJBE, N7BA, N7BB, SDBA, CVF5, CVFF, CVR5, CVRA, CVRB, CYF5, CYFA, CYFB CYFC, CYFF, CYFG, CYR5, DRF5, DRFA, DRFB, DRFC, DRFF, DRFG, DRR5, DRRA, DRRB, GBVAJ(QW2R), GBVAJPF, GBVAJQW, MZ-CD, P8FA, P8FB, PGFA PGFB, QJBA, QJBB, QJBC, QJBD, QVFA, QWFA, SRFA, SRFB, SRFC, SRFD, SRFE, UHFA, UHFB, UHR5, USR6, USRA, USRB, UYR6, 4HG, 4HG (P22DTE), 4HH 4HH (P22DTE), 4HJ, 4HJ (P22DTE), 4HM, 4HM (P22DTE), 4HU, 4HU (P22DTE), 4HV, 4HV (P22DTE), BG, CRFF, CVF5, CVFF, CVR5, CVRA, CVRB, CYF5, CYFA, CYFB CYFC, CYFF, CYFG, CYR5, CYRA, CYRB, DRF5, DRFA, DRFB, DRFC, DRFG, DRR5, DRRA, DRRB, GBVAJ(QW2R), GBVAJPF, GBVAJQJ, GBVAJQJ (QJ2R), GBVAJQJ (QJ2S) GBVAJQJ (QJ2W), GBVAJQW, GBVAJQW (QW2S), GBVAJQW (QW2W), ID4/DT224, MZ-CD, P22DTE, P22DTE (4HG), P22DTE (4HH), P22DTE (4HJ), P22DTE (4HM) P22DTE (4HU), P22DTE (4HV), P8FA, P8FB, PGFA, PGFB, QJ2R, QJ2S, QJ2W, QJBA, QJBA (BG), QJBB, QJBC, QJBD, QVFA, QW2S, QW2W, QWFA, SRFA, SRFB, SRFC SRFD, SRFE, UHFA, UHFB, UHR5, USR6, USRA, USRB, UYR6, 244DT, D2FA, D2FB, D4FA, DOFA, F4FA, FXFA, H9FA, H9FB, H9FD, JXFA, JXFC, PD24P, PHFA, PHFC, ZSD 424 MZ-CD, SA2R, SA2S, SA2W, SAFA, SAFB
• C5279 contains the tools to enable the setting and locking of the engine to be undertaken during Timing Chain replacement and also the resetting of the position of the Crankshaft Sensor Carrier during Engine reassembly procedures.
• Citroën, Fiat, Ford, Jaguar, Land Rover, LDV, LTI, Mazda, Peugeot

• Slim profile head with flush direction lever offers better accessibility.
• 90 tooth design with 4 °of arc swing for tight work spaces.

• FOUR FLAT sides on socket deter rolling.
• Wrench ready FOUR FLAT sides.
• Stamped sizes for easy visibility.
• Chrome finish for easy cleaning and corrosion protection.
• Available sizes: 12-24mm.
• Available sets: 13pc.

• Designed for use with the part numbers 77099 and 77066 with the wheels on and the vehicle sitting on the ground
• Fully adjustable for wheels up to 18 inch diameter and designed to hang on the tyre giving hands free operation
• Can be used without the top bracket (held in place by hand) for vehicles with a low wheel arch
• Ideal for quick checking of camber, caster and KPI when used with Gunson 77099/77066

• Flexible battery system: works with all MILWAUKEE® M18™ batteries
• Protected against splashing water at all angles (IP24)
• 2 adjustable metal hooks for hanging in vertical and horizontal position
• Pivoting 45° forward & backward head allows for 180° coverage
• TRUEVIEW™ high definition lighting
• Thanks to its compact design it operates in locations other lights cannot
• Three LED design with 2 light settings provides 300 lumens on High and 130 lumens on Low setting

• Standard and extended handle lengths for easier access in tight spaces or extra leverage.
• Slim profile head with flush direction lever offers better accessibility.
• Versatile lockable flex head: Switch between 11 locking positions and freely moving head.
• 90 tooth design with 4 degreeof arc swing for tight work spaces.

• Radius corner on working end provides higher torque and better gripping of fastener
• Chamfered drive opening allows a quicker connection between socket and fastener
• Mirror polish chrome-plated finish prevents rust
• Knurled teeth on bottom of socket improve grip when handling
• Chrome Vanadium Alloy Steel

• Plastic Carry Case With Foam Inlay
• Includes Product Identification & Help Guide
• Fit & Remove TPMS Components With Ease
• Specialist TPMS Hand Tools Kit To Cover All Bases When Fitting & Removing Sensors
• Includes Low Limit Torque Wrench, TPMS Sealing Grommet Removal & Fitting Tool, Pre-Torqued Valve Core Tool, 11mm & 12mm Deep Sockets, Selection Of Torx Bits Presented In Plastic Case With Foam Inlay

• Personalized Blowcase
• Gauge with 0.01mm Increments
• Shock-Proof Gauge
• Transverse Arm for Fine Adjustment
• Identifies Vertical and Lateral Wobble
• 3-Point Clamp Stand for Safe Mounting onto Shock Absorber
• Measures Radial and Axial Offsets on Brake Discs

General Information

High Voltage Floor Matting - 1 Metre. High Voltage Floor Matting - 1 Metre

• Ribbed on the underside fabric impression on upper side
• Tested to IEC611111 Class 2 rated for working voltages up to 17kV
• Flame retardant oil and acid resistant insulated floor matting

• Dimensions: Width 1000mm, Thickness 3.00mm, Weight 4.0kgs per metre

• .Supplied in carrycase.
• Includes straight and right angled quick connect couplings, nine adaptors, Orings and 890mm long hose.
• Accurately tests oil pump pressure and also low oil warning devices.

• Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
• Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
• QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
• Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
• Impact rated drill bit with ¼″ hex shank optimised for impact drivers.

• Finger squeeze protection at every position.
• Push button for quick and precise adjustments on the workpiece.
• Box-joint design provides highest durability and larger gripping capacity.
• Nail and wire holder.
• Induction hardened teeth with self-locking serration to not slipp on the workpiece.
• Double toothed jaw for maximum grip.

• Length: 14 11/16in. overall
• 32 teeth fixed head w/o quick release
• Torque accuracy CW: +/- 3%, comfort grip handle