Proud to be a UK-based company
Contact usWorkshop Tools
Categories
Brand:
Select Brand
invoice Page 28 of 106
Results 541 - 560 of 2101
Part number: 4932471727
Important compatibility info
| Title | 280mm Torque Locking C-Clamp w. Sw.Jaws-1pc |
Additional Information
11 Torque Locking C-Clamp w. Sw.Jaws-1pc
- Rust protection: Chrome plated tool increases life by reducing corrosion.
- Lever release design: Traditional release lever for jobsite convenience.
- TORQUE LOCK™: Faster set up and easy release when clamping flat and round material. Extra force can be applied to the TORQUE LOCK™ screw for better and more secure grip. Can also be used for hanging / storage purposes.
- Hardened jaws: Better grip force on jobsite material.
ONLY
£37.70
£37.70
Part number: 4932480674
Important compatibility info
| Title | 3/8in. Drive 9/16in. Spark Plug Socket -1pc |
Additional Information
3/8″ Drive 9/16in. Spark Plug Socket -1pc
- Pin hole to enable securing of socket.
- Knurling area for better finger grip.
- Stamped sizes for quick and easy identification.
- Dual-material rubber retainer prevents wear down and enables secure hold.
ONLY
£37.57
£37.57
Part number: ACB9102
Important compatibility info
| Type | Screw |
| Function | Screw |
ONLY
£37.46
£37.46
Part number: 48227408
Important compatibility info
| Title | 200mm adjustable wrench. |
Additional Information
200 mm Adjustable Wrench - 1 pc
- Lanyard hole.
- 8? adjustable wrench (48227508) has an extra wide jaw of 38 mm for increased jaw capacity in confined environments.
- Permanent lasered inch and mm markings for accurate adjustment
- Parallel jaws won't slip or damage finish surfaces.
- Slim head design for reaching into tight spaces.
- Ergonomic rounded handle design for a comfortable fit in the hand and less pressure points on the palm.
- Chrome plating for best-in-class rust protection and increased durability.
- Precision adjustment screw with accurate threads and tight tolerances. The jaws won't back off during use.
ONLY
£37.42
£37.42
Part number: 4932480189
Important compatibility info
| Title | 16 mm MAX BITE flexible head ratcheting combination spanner -1pc |
Additional Information
16 mm MAX BITE™ flexible head ratcheting combination spanner -1pc
- Rounded I-Beam handle for comfortable handling grip.
- 180° pivoting head for greater access to tight spaces.
- MAX BITE™ open-end grip reduces rounding and stripping.
- Chrome alloy steel, chrome plated.
- Durable double stacked pawls for longer ratchet life.
- 144 ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.
- Ink-filled labels for better visibility.
ONLY
£37.32
£37.32
Part number: 4932471511
Important compatibility info
| Title | 18 mm MAX BITE ratcheting combination spanner |
Additional Information
Maxbite Ratcheting Metric Combination Spanner 18mm - 1pc
- Chrome alloy steel, chrome plated.
- Ink-filled labels for better visibility.
- Rounded I-Beam handle for comfortable handling grip.
- MAX BITE™ open-end grip reduces rounding and stripping.
- Durable double stacked pawls for longer ratchet life.
- 144 Ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.
ONLY
£37.21
£37.21
Part number: CCWS1210M
Important compatibility info
| Title | 10 PC Metric 12 PT Stubby Combination Wrench Set 10mm to19mm |
Additional Information
- High quality hot-forging process provides a performance exceeding ASME standard
- Short beam excels for use in limited space applications
- Set contains 10 popular Metric sizes for all Professional technician's needs
- High visibility colour filled size mark for easy identification during use
- Premium Chrome Finish
- 15 degree offset box end
- ASME Compliant
- 10mm to19mm
ONLY
£37.13
£37.13
Part number: 4932480426
Important compatibility info
| Title | Hex socket ShW 1in deep 32mm-1pc |
Additional Information
Hex socket ShW 1in deep 32mm-1pc
- Dual hole design and groove for security accessories.
- Stamped and ink filled diameter markings and laser etched part number for wear resistance.
- Non-slip hex geometry to prevent socket and fastener rounding.
- Best fitting thanks to 6 gripping points.
- SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
ONLY
£37.03
£37.03
Part number: QP8066H
Important compatibility info
Additional Information
If you are looking for a quality and reliable blow torch, then look no further! The quick pro auto swivel torch features a versatile multi angle head, ideal for confined areas. It is a durable high power, high temperature torch, which is instantly FLARESAFE; so can be used at any angle. It also features a swirl flame for more even heat distribution, wrapping around the target. Ideal applications include plumbing, brazing and automotive repair. With over 20 years of experience, GoSystem Limited is committed to technological advancement in the specialist portable gas appliance market. Their new product development programme covers a variety of blow torches & portable gas stoves, all designed and tested to comply with relevant European and international standards.
Need a handy tool? Then look no further! The Quick Pro Auto Swivel Torch features a versatile multi angle head, ideal for confined areas. It is a durable high power, high temperature (up to 1800°C) gas torch, which is instantly FLARESAFE; use at any angle. It also features a swirl flame for more even heat distribution, wrapping around the target. Ideal for plumbing, brazing, automotive. With over 20 years of experience, GoGas Limited is committed to technological advancement in the specialist portable gas appliance market. Their new product development programme covers a variety of blow torches & portable gas stoves, all designed and tested to comply with relevant European and international standards.
- Gas cartridge sold separately
- For use with G2400 Go System propane gas cylinder
- Fitted with CGA600 connection
- Safety checked and test burned
- Ideal for plumbing, brazing and automotive
- Auto start Piezo ignition
- Swirl flame for more even heat distribution, wrapping around the target
- Instantly FLARESAFE; use at any angle
- A durable high power, high temperature (up to 1630 C) gas torch
- Versatile, multi angle head, ideal for confined areas
- Conforms to BS:EN521
ONLY
£36.96
£36.96
Part number: CIEXT0110
Important compatibility info
| Title | 1in Drive 10in Length Impact Socket Extension |
Additional Information
- Radius corner on working end provides better gripping of fastener
- Chamfered drive opening smooths connection between socket and drive tool
- Made from Chrome Molybdenum Alloy Steel for strength and durability
- Black phosphate finish resists corrosion
- For use with impact power / air tools
- Radius Corner Design
- Chamfered Drive Opening
- Phosphate Outer Finish
- Chrome Molybdenum Alloy Steel
ONLY
£36.83
£36.83
Part number: CISD3460M
Important compatibility info
Additional Information
3/4in Drive 60mm 6 PT Deep Impact Socket
- Radius corner on working end provides better gripping of fastener
- Chamfered drive opening smooths connection between socket and drive tool
- Made from Chrome Molybdenum Alloy Steel for strength and durability
- Black phosphate finish resists corrosion
- For use with impact power / air tools
- Radius Corner Design
- Chamfered Drive Opening
ONLY
£36.80
£36.80
Part number: 61-0406
Important compatibility info
| Socket Type/Version | Impact |
| Imperial/Metric | Metric |
| Number in Pack | 5 Piece |
| Title | Socket Set - Truck Service - Metric - Shallow & Deep |
| Socket Driver | 3/4 inch |
| Spanner Size | Various |
| Material | Chrome Molybdenum |
Additional Information
- Shallow 27, 30 mm, Deep 33, 35 mm, Double Square 17 mm
- Black Phosphate
- Heat treated for longer life, & chamfered openings for faster socket fit over fastener
- Radius corner design for better gripping of fastener & chamfered openings for faster socket fit over fastener
- Forged from high quality Chrome Molybdenum alloy steel
ONLY
£36.76
£36.76
Part number: CGJP16
Important compatibility info
Additional Information
400mm Groove Joint Pliers
- Lacquer finish for exceptional rust prevention.
- Hardened jaws for improved strength and durability.
- Jaw design provides exceptional gripping force.
- Professional grade pliers constructed from chrome-moly material
- Comfort grip handles
- Positive joint engagement.
- Lifetime Warranty
- Lifetime Warranty
ONLY
£36.75
£36.75
Part number: C4839
Important compatibility info
| Material | Steel |
| Colour | black/silver |
| Type | Mounting Tools, timing belt |
| Function | Mounting Tools, timing belt |
| Extra Description | Carlyle |
| Number of Parts | 5 -part |
ONLY
£36.73
£36.73
Part number: C4834
Important compatibility info
| for OE number | OEM ref 21-168, OEM ref 303-393 |
| Type | Retaining Pin, flywheel |
| Function | Retaining Pin, flywheel |
| Extra Description | Carlyle |
| Number of Parts | 3 -part |
ONLY
£36.72
£36.72
Part number: CISD3455M
Important compatibility info
Additional Information
3/4in Drive 55mm 6 PT Deep Impact Socket
- Radius corner on working end provides better gripping of fastener
- Chamfered drive opening smooths connection between socket and drive tool
- Made from Chrome Molybdenum Alloy Steel for strength and durability
- Black phosphate finish resists corrosion
- For use with impact power / air tools
- Radius Corner Design
- Chamfered Drive Opening
ONLY
£36.71
£36.71
Part number: CSDSP8
Important compatibility info
| Title | 8 PC Phillips Screwdriver Set |
Additional Information
8 PC Phillips Screwdriver Set
- Tri molded grip provides comfort to user.
- Vapor blast tips adds durabilty and performance.
- SVCM provides strength by providing torsion elasticity.
- Constructed from SVCM
- Tri molded comfort grip handle
- Easy size identification
- Vapor blasted tips
ONLY
£36.69
£36.69
Part number: 49560260
Important compatibility info
| Title | Holesaw Adjustable 51-178mm-5pc |
Additional Information
Holesaw Adjustable 51-178mm-5pc
- Laser marked preset diameters at 51 178 mm.
- Diameter is adjustable from 51 mm to 178 mm in 6.4 mm steps.
- Dust collection shroud for 100% dust free work when overhead drilling.
- For cutting large diameter holes for air conditioning pipes fans downlights and ceiling speakers.
- Suitable for use on drywall (max. 25 mm) and ceiling tile. Not suitable for OSB wood boards.
ONLY
£36.66
£36.66
Part number: 4932492509
Important compatibility info
| Title | 3/8in. Drive 10 PC Metric Deep Chrome Sockets -10pc |
Additional Information
3/8″ Drive 10 PC Metric Deep Chrome Sockets -10pc
- Stored on a socket rail for better tool organization
- Chrome finish for easy cleaning and corrosion protection
- Stamped sizes for easy visibility
- Wrench ready FOUR FLAT sides
- FOUR FLAT sides on socket deter rolling
ONLY
£36.55
£36.55
Part number: 4932493619
Important compatibility info
| Title | 305mmTORQUE LOCK™ Large Jaw Locking Plier |
Additional Information
12″ - 305mmTORQUE LOCK™ Large Jaw Locking Plier -1pc
- Chrome plated tool increases life by reducing corrosion.
- Hardened jaws for better grip force on jobsite material.
- Large jaws maximize pressure points for range of applications with an efficient, easy one-handed control release.
- TORQUE LOCK™ enables faster set up and extra force can be applied to the TORQUE LOCK™ screw for better and more secure grip. Can also be used for hanging / storage purposes.
ONLY
£36.51
£36.51
Page 28 of 106
Workshop Tools
