Workshop Tools

• Comes complete with a handy storage case
• Range 0-99 psi / 0-7 bar
• Measures in PSI, bar, kpa, Kg/Cm2
• Tread depth gauge to measure tyre tread depth
• Unique 360 degree rotating nozzle and LED light to assist in locating tyre valve

• Dimensions (MM): H 141 x W 40 x D 29
• Weight (kg): 0.094
• Batteries: 2x CR2032 Included

• Complete with 2 piece adaptor kit for bikes; air beds and other inflatables
• Easy to read digital display
• Compact for easy storage and transportation
• Built in white LED light
• Rechargeable with power bank function
• 4 programmable pressure settings with digital autostop for ease of use
• Inflates bicycle tyre in <2 minutes
• Versatile - Ideal for cars; motorbikes and bicycles

• EU Conforms: Electromagnetic Compatibility - Directive 2014/30/EU Restriction of Hazardous Substances (RoHS) - Directive 2015/863/EU Regulation (EC) No1907/2006 - REACH Machinery Directive 2006/42/EC UK Comforms: Electromagnetic Compatibility Regulations 2016 Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 Regulation (EC) No1907/2006 - REACH Supply of Machinery (Safety) Regulations 2008

• Large digital display that indicates to one decimal
• Able to show psi, bar and kPa
• Compact tyre inflator
• Inflates a 13” tyre in 4.5 minutes
• 3m power cable
• Easy to use
• Complete with three-piece adaptor kit

Safety information

Safety First Read the operating and safety instruction. Follow them carefully. Maximum safe operating pressure 9 bar (125 psi). Air lines are dangerous - use them correctly Putting into service Before use check cap-retaining screws are secure.If the Air tool is dropped check for cracked components. Check air line pressure before connecting the Air tool.The Air tool should be used only by people trained in the use of pneumatically operated tools. Use Keep hands away from moving parts. Never operate the Air tool near the face or body. Only use Air tool to fit CV boots. If air line pressure exceeds 9 bar fit a regulator. Disconnect the Air tool from the air supply after use.

Installation Information

Operation: 1. Slide boot onto arms, large end first. The arms should just protrude from the small end of the boot. To fit a boot to an inner joint, turn the boot inside out before sliding i onto the Airtools´s arm. 2. Press " + " button until arms open enough to pass over the joint. Keep hands clear of moving parts. The air line can now be disconnected. The arms will remain open until the " - " button is pressed. 3. Place Airtool over CV joint and press release button (" -"). Keep hands away from moving parts. 4. Withdraw the Airtool, leaving the boot in position. Complete the installation in the normal way.