Workshop Tools

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

General Information

Flameless Hot Air Blower. Flameless Hot Air Blower

• Net weight without gas 68 grams. Dimensions 110 x 27 x 85mm
• Fueled by 5.5ml butane gas which is available from newsagents and supermarkets (cigarette lighter gas)
• Includes heat shrinking tubes
• Run time approximately 20-25 minutes (at mid setting)
• Variable heat/temperature range up to 650 degrees C
• Features: Instant electronic ignition, refillable tank with see through window, stable catalytic heating system. Stable catalystic heating system

• Variable heat/temperature range up to 650 degrees C
• Run time approximately 20-25 minute
• Net weight without gas 68 grams
• Dimensions 110 x 27 x 85mm

• Qty: 2
• 1/8in. Gas BSP Male
• Flexible rubber
• Swivel ends

• 300mm (12in.)

General Information

Glow Plug Socket Set 1/4"D 3pc Glow Plug Socket Set 1/4"D 3pc.

• Sizes: 8mm, 9mm, 10mm
• Features 1/4in. Drive and universal joint
• Manufactured from Chrome Vanadium
• Super slim for improved access in tight areas

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Long panel wrenches provide additional reach and leverage on stubborn fasteners and feature an aggressive non-slip design.
• Each wrench is constructed from chrome vanadium high alloy steel and is produced using a precision hot forging process with extra emphasis on special heat treatment to provide maximum strength and durability.
• Wrenches are technician's first choice for getting the job done and come backed by unwavering commitment to detail and uncompromising quality from top to bottom of each product. Long panel wrenches feature an aggressive non-slip design.
• Mirror polish chrome-plated finish resists rust while 12-point, 15 Degree offset box ends provide precise fastener control. Non-slip jaw designs allows for higher torque and turning power in tough applications. Includes storage rack.

• Carlyle Metric 12 Point Long Non-Slip Combination Wrench - 11 mm

General Information

Riveter + 30 Rivets Riveter + 30 Rivets.

• Aluminium/Steel Rivets
• Complete with spanner for head change
• Spare jaws available Part No 2804
• Standard riveter with 2.4/3.2/4/4.8mm heads and 30 assorted rivets

• Integrated bolt cutter.
• Integrated crimper.
• Rust protection increases tool life by reducing corrosion.
• Reaming head for smoothing 12 - 25 mm pipe.
• Plier suitable for gripping and bending cables.
• Wire stripper : Strips wire sizes 0.75 mm², 1.0 mm², 1.5 mm², 2.5 mm², 4.0 mm², 6.0 mm².
• Loop maker: Built in loop maker function for wire.
• Wire cutter: With curved laser hardened cutting edges.
• One-handed swing lock: Easy one-handed use and remains locked while in pouch. Spring loaded for easy opening.

General Information

Timing Pins - Renault engines. Timing Pins - Renault engines

• OEM codes MOT 1489/1054/1430, Mercedes 607 589 01 15 00, 607 589 00 15 00
• For Flywheel locking on Mercedes Benz Citan use Laser 3203 (starter motor removal required)
• Renault engine code K9K (2002-on), Mercedes 607951 (K9K) (2012 on)
• Popular with the Nissan Micra 15 Dci
• Crankshaft and Camshaft timing pin set for Renault 15 and 19 DCi engines fitted to Laguna, Kangoo and Clio models

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Range of hose sizes, working lengths and a choice of colour
• Hose recoils to a fraction of it's working length
• 200 m straight ends with spring guard
• Nickel plated 360° swivel fittings
• Polyurethane (PU) material

• Maximum Working Pressure: 200 psi / 14 bar Hose Length: 5 m Hose Inside Diameter: 6.5 mm Hose Outside Diameter: 10 mm Hose Fittings: R 1/4 swivel ends Hose Colour: Blue

General Information

Oil Filter Wrench Set 3/8"D 2pc

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Chrome finish for corrosion and rust protection.
• Laser engraved size ID for quick and easy identification.
• Precision knurling located on the shaft and female drive end for better control when hand threading.

• The unique single pawl design prevents the Gear from slipping during high-speed turning.
• The ratchet gear mechanism head is and designed with High-grade Cr-MO material, providing extra strength and durability.
• The tool has a Super Rust-Resistant finishing, proven through a Salt Spray Test that lasted over 72 hours.
• The handle features a unique ergonomic design made of two components for enhanced comfort.
• The 120-Tooth reversible ratcheting mechanism allows for a minimal sweep of 3 degrees, enabling usage in tight spots.
• The Heavy Duty New Index Flex head mechanism offers the option to fix the head or use it in a flexed position.