Workshop Tools

• Chrome finish for corrosion and rust protection.
• Laser engraved size ID for quick and easy identification.
• Precision knurling located on the shaft and female drive end for better control when hand threading.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Lacquer finish for exceptional rust prevention
• Hardened jaws and cutting edges
• Comfort grip handle
• Chrome-moly
• Professional grade

• Suitable for Cars / Motorbikes / Trucks and Vans
• Oil Drain Plugs may need to be replaced because of stripped threads

• 90 Tooth Ratchet Design allows access to confirmed spaced with a 4 degree arc swing
• Flip lever mechanism provides quick and easy forward or reverse operation.
• Full polish finish prevents corrosion and rust.
• 4 Degree Arc Swing
• Designed with professional techincians input and application in mind
• Full polish finish

• Exceeds ASME standards by 1.5 times

• 15° offset box for better accessibility.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.

• Pin-less design for increased durability.
• Dual hole design and groove for security accessories.
• Ball detent design for superior impact socket retention.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Swivel for access In hard to reach places.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Integrated wire cutter that can cut up to 1/4in. bolt
• Nickel-plated finish for corrosion resistance
• Durable forged CR-V jaws with induction hardened teeth for ulitimate durability
• Complies with ASME specs B107.24
• Pull-up release allows for one-handed opening when locked
• Tested to exceed 2,500 lbs. jaw pressure
• Hard rubber grip on handle helps prevent hand slippage

• Radius corner on working end provides higher torque and better gripping of fastener
• Chamfered drive opening allows a quicker connection between socket and fastener
• Mirror polish chrome-plated finish prevents rust
• Knurled teeth on bottom of socket improve grip when handling
• Chrome Vanadium Alloy Steel

• 15° offset box for better accessibility.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.

• V-Jaw design for versatile gripping of round objects
• Twice as fast as standard groove joint pliers
• Dipped handle for comfortable grip
• Black oxide finish resists rust and corrosion
• Maintains parallel jaws for optimal grip

• Set Also Features Short Hex Arm For Tight Fit Access, & Color Coded Hex Key Holder For Convenient Storage & Identification
• Magnetic Ball On Long Arm Allows Better Angle Of Entry For Hard To Reach Areas Plus Fastener Control.
• Made From Durable Chrome Vanadium w/ Rugged Black Phosphate Finish For Long Life & Added Strength

• Hex Key Set Long Magnetic Hex Ball SAE Carlyle Hand Tools

• High quality hot-forging process provides a performance
• Longer beam provides more torque during use
• Patented anti-slip open end grasps nut tight , Zero chamfer box end offer better bite on worn fasterners
• High visibility colour filled size mark for easy identification during use
• Premium Chrome Finish
• Anti-Slip and radius corners on open end
• Zero chamfer box end

• ASME Compliant

• Imperial Thread
• 45 Degree Angle Profile
• Qty: 50

• Two delivery tubes included - angled steel tube and flexible tube
• Standard 400g cartridge
• 3-way filling operation, standard 400g cartridge, suction or bulk fill up to 500cc
• Heavy duty manual grease gun

• 7 Star sockets on a rail: E6/E7/E8 in 1/4in. drive and E10/E12/E14/E16 in 3/8in. drive
• Socket rail included
• Black finish
• Chrome Vanadium

• CR-V alloy steel for long lasting durability.
• Worldwide patent.
• Meet ANSI, DIN torque spec.
• Processing without tolerance to true present the 90 teeth 4 degrees of operation function.
• Meet DIN torque spec.
• 180 degrees flex head & extra long beam offers extreme reach and loads of leverage.
• Ratcheting box ends are designed to accommodate a variety of fasteners including both 6-and 12-point nuts.
• Reversible wrenches feature an easy-to-use reversing mechanism
• Wrenches feature a sleek, offset-head design for tight access points, slim dimensions for confined areas.

• Radius corner on working end provides higher torque and better gripping of fastener
• Chamfered drive opening allows a quicker connection between socket and fastener
• Mirror polish chrome-plated finish prevents rust
• Knurled teeth on bottom of socket improve grip when handling
• Chrome Vanadium Alloy Steel

• 180 degree rotating flexible heads allow you to apply leverage at any desired angle and get around obstructions in tight areas.
• Premium chrome vanadium steel provides durable life
• Heat treated for maximum strength
• 72 tooth ratchet
• Dual 180 degree swivel ratchet head design
• Mirror Polish Finish

• ASME Compliant

• EP20, EP22, EP24
• Black Phosphate
• Heat treated for longer life, & chamfered openings for faster socket fit over fastener
• Radius corner design for better gripping of fastener & chamfered openings for faster socket fit over fastener
• Forged from high quality Chrome Molybdenum alloy steel

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening
• Chrome Molybdenum Alloy Steel
• Phosphate Outer Finish

• 180-Degree pivoting drive gives you the power you need in tight spaces
• Mirror polish chrome-plated finish prevents rust
• 180-Degree Pivoting Drive
• Mirror Polish Chrome-Plated

• Chrome Vanadium Alloy Steel

• Metal housing for increased durability.
• Ergonomic handle provides comfortable and secure grip.
• High contrast size callouts for quick and easy identification.
• Foldable keys enable easy access & storage solution.

• Rust protection: Chrome plated tool increases life by reducing corrosion.
• Lever release design: Traditional release lever for jobsite convenience.
• TORQUE LOCK™: Faster set up and easy release when clamping flat and round material. Extra force can be applied to the TORQUE LOCK™ screw for better and more secure grip. Can also be used for hanging / storage purposes.
• MAXBITE™ pliers have special jaw geometry for maximum grip.
• Hardened jaws: Better grip force on jobsite material.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Comfort non-slip grip
• Self locking with more gripping capacity
• Slim head design allows for greater accessibility

• 1/4 BSP fitting
• Tyre chuck connection with 350mm rubber hose
• Robust pressure gauge with four scales 0-220PSI/ 0-15BAR / 0-15kg/cm2 / 0-1500 kPa
• Die-cast metal body

• Lacquer finish for exceptional rust prevention.
• Hardened jaws for improved strength and durability.
• Comfort non slip grip provides the user good control when using.
• Slim head design allows for greater accessibility.
• Professional grade pliers constructed from chrome-moly material
• Comfort non slip handles
• Lifetime Warranty

• 3-Way fill with cartridge, bulk or manual capability.
• Supplied with rigid delivery tube hydraulic 4-jaw coupling.
• Fits standard 400g cartridges.
• Die-cast pump head with air-bleed valve.
• Can be used with NAPA NGR7400 Grease and other brands.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• 180 position mechanism provides 2 degree swing arc for tight access areas
• 1.5 times ASME standard torque provides strength for the professional user
• Patented anti-slip open end provides secure grip on new and worn fasteners
• 180 Positon Ratcheting Mechanism
• Anti-Slip and radius corners on open end
• Mirror Polish Finish

• ASME Compliant

• 180 position mechanism provides 2 degree swing arc for tight access areas
• 1.5 times ASME standard torque provides strength for the professional user
• Patented anti-slip open end provides secure grip on new and worn fasteners
• 180 Positon Ratcheting Mechanism
• Anti-Slip and radius corners on open end
• Mirror Polish Finish

• ASME Compliant

General Information

Engine Timing Tool Kit - Ford 1.4/1.5/1.6 TDCi, PSA 1.4/1.6. Engine Timing Tool Kit - Ford 1.4/1.5/1.6 TDCi, PSA 1.4/1.6

• Crankshaft locking tool
• Crankshaft alignment tool
• Camshaft alignment tool
• This engine timing tool kit is suitable for Ford Focus 1.4 | 1.6 TDCi chain engines with codes G8DA | G8DB | HNDA 2004-2006.The kit includes:

• Zero setting in any position
• x1 SR44 1.5 v battery supplied
• Large LCD display
• Metric, decimal inch and fraction inch (1/64 in) toggle
• Made from extra strong carbon fibre composite

• Accuracy: 0.2 mm
• Calibration: 0-25 mm / 0-1 in
• Reading Accuracy: 0.01 mm / 0.0005 in / 1/64 in

• Part of PACKOUT™ Shop Storage.
• Fully customise your shop according to your needs.
• Most secure and easy mounting with click & lock mechanism.
• Easy and fast access to all batteries.
• Clip in batteries for secure storage.

• Phosphate
• 4, 5, 6, 7, 8, 10, 12 mm
• Includes Blow Mold Case
• Radius corner design for better gripping of fastener & chamfered openings for faster socket fit over fastener
• Forged from high quality chrome molybdenum alloy steel

General Information

Cable End Shroud with Grip Collar - 35mm. Cable End Shroud with Grip Collar - 35mm

• Will also fit over cable connectors and lugs
• Push on shrouds for un-insulated cable ends - 1000v insulated
• Flexible gripping collar prevents damage to the cable insulation
• Also available: 15mm x 100mm length and 25mm x 110mm length
• 35mm diameter x 130mm length

• L-keys for Hex Screws – 3 mm, 4 mm, 5 mm, 6 mm, 8 mm & 10 mm
• S2 steel with PP/TPR handle
• ideal for use by mechanics working on electric vehicles
• safe use for live voltages up to 1000V AC/1500 DC

• High quality hot-forging process provides a performance
• Premium chrome finish to protect against corrosion
• High visibility colour filled size mark for easy identification during use
• Premium Chrome Finish
• 15 degree offset box end
• Anti-Slip and radius corners on open end

• ASME Compliant

• 180 position mechanism provides 2 degree swing arc for tight access areas
• 1.5 times ASME standard torque provides strength for the professional user
• Patented anti-slip open end provides secure grip on new and worn fasteners
• 180 Positon Ratcheting Mechanism
• Anti-Slip and radius corners on open end
• Mirror Polish Finish

• ASME Compliant

This grease gun from Comma comes ready to use and is compatible with 400ml grease cartridges (sold separately). Quick and easy to use this heavy duty grease gun allows for accurate and controlled application.

Comma Oil and Chemicals was founded on a real ‘passion for performance’ in 1965 as a UK-based, independent oil 'blender'. Quickly establishing their products as being the first-choice supplier of engine oils to independent workshop mechanics in the UK, Comma has recently grown to distribute to more than 40 other countries around the world.

• Detachable threaded applicator tube
• Handheld
• For accurate dispensing of 400ml cartridges

• Cutting edges for medium 3 mm and hard 2 mm
• Red and Yellow color symbolize the international color for safety
• Insulated, dual layered TPR handles
• Hardened, CR-MO jaws for added strength and durability

General Information

Brake Cylinder Hone Brake Cylinder Hone.

• 22mm - 69mm
• For honing out brake cylinders
• For use with a standard drill
• Spare stones set is sold separately (Part 2244A)
• Packaged in a sliding blister

• Holds shallow or deep, SAE or metric
• Locks sockets in place by a simple twist to the right
• Non-Skld Lock-a-Socket[TM] is the most versatile product for socket organization. It's made of lightweight plastic with rubber grips on the bottom.

• Socket Holder
• Carlyle Tools