Workshop Tools

General Information

Spark Plug Socket 3/8"D 16mm

• Manufactured from Chrome Vanadium
• Suitable for use on BMW motorcycle spark plugs
• Thin wall (maximum diameter 20.8mm)
• Matt finish
• 6 point face drive (Single Hex)

General Information

Drip Tray. Drip Tray

• Also useful when transfering fluids to avoid workshop floor contamination
• Protect your drive and garage floors from oil drips
• Pouring spout in corner
• Manufactured from plastic
• Size: 24in. x 18in. x 3/4in. (609mm x 457mm x 19mm)

General Information

Flexible Air Hose - Blue Flexible Air Hose - Blue.

• Silicone free and resistant to oil, UV, abrasion and weather
• Manufactured from matt finished, super flexible rubber/vinyl hybrid polymer material which lies flat when uncoiled
• 9.5mm x 15m
• Maximum working pressure 300PSI , minimum bursting pressure 900PSI and the hose can stand -40° to +60° C
• Fitted with 1/4in. BSPP fittings

General Information

Timing Tool Kit - 1.3 JTD/HDi Fiat, GM, Suzuki, Ford, PSA

• Application: 1.3 JTD/HDi Diesel engines found in Fiat, GM, Suzuki, Ford, Citroen Nemo and Peugeot Bipper
• Timing tool kit with Camshaft/Crankshaft alignment tools only
• Made in Sheffield
• Full Engine rebuild kit available part number 4773
• Use 6408 (Camshaft Holding Tool) if removing camshaft drive gears

General Information

Cambelt Tool Kit - for VAG Petrol FSI 1.4, 1.6

• Made in Sheffield
• This kit is suitable for use with the following replacement Cam-belt kits INA 530008910, Contitech CT957K1, Gates K025565XS
• Use one belt to transfer the drive across the camshafts depending on the engine specification the cam setting pins may be used with or without the crossbar provided
• A small but essential kit for setting the camshafts and tensioner on the popular 1.4 and 1.6 FSi petrol engines found across the VAG ranges from 1999 to 2008 these engines

General Information

Timing Tool Kit - Ford 1.25, 1.4, 1.6 16V, 1.5, 1.6 TI-VCT

• Made in Sheffield
• Also relevant to the Mazda and Volvo ranges
• Suitable for use with the following replacement belt kits INA530014010, Contitech CT881K2, Gates K025433XS
• This kit includes the alignment tool for VVT system found on many of these engines which extends the kits coverage from 1996 to 2010
• The essential camshaft and crankshaft alignment tools for the popular 1.25, 1.4, 1.6 Ford, petrol, engines

General Information

Ribe Socket Set 1/2"D 3pc

• Sizes: 6S, 8S, 12S
• Manufactured from Chrome Vanadium with Phosphate finish
• For clutches, cylinder heads and balance shaft fixings etc
• Applications: Nissan, Renault
• 1/2in. Drive

General Information

Engine Timing Tool Kit - for VAG 1.0, 1.2, 1.4L

General Information

EU Registered Design

General Information

Fuel Filter Wrench 88mm x 15 Flats

• Pressed steel construction
• Equivalent to Honda OEM 070AA-RL00200
• 88mm (point to flat) x 15 flutes 3/8”D
• Applications include: Honda I-dtec diesel fuel filter
• Also suitable for oil filter removal where dimensions match (Hyundai/Kia 3.3 and 3.8 V6 petrol)

General Information

Engine Cylinder Hone 51-250mm. Engine Cylinder Hone 51-250mm

• Use with cordless drill for efficient results
• Replacement stone set Laser Part No. 2071 (consumable)
• Flexible self-aligning shaft allows use without removing cylinder
• Cleans and de glazes cylinders of carbon deposits quickly and effectively
• Adjusts from 51mm to 260mm