Workshop Tools

• 1.6 mm illegal tyre tread depth mark
• Accurate measurement of tread 1-26 mm
• DVSA approved for MOT testing
• Self-adjusting friction device
• A positive sealing washer ensures reliability

• Accuracy: +/- 2 psi
• Calibration: 6-50 psi / 0.5-3.4 bar
• Reading Accuracy
• 1 psi / 0.1 bar

• Gas cartridge sold separately
• For use with G2350 or 2175A Go System threaded gas cartridges
• Safety checked and test burned
• Ideal for general DIY, paint stripping, plumbing and intermediate soldering
• Stability base included
• Simple and safe to use
• Auto start Piezo ignition
• Rapid 1 minute warm up, use at any angle with precise flame control
• Stable powerful fine flame (up to 1400 C)

• Conforms to BS:EN521

• Laser edged ruler markings on the blade allows to measure and cut in one go.
• Index finger groove for more comfort.
• Jobsite offset scissors with 60°-offset head allows to keep hand above cutting material.
• Bolt lock technology protects blades from loosening to ensure precise cutting.
• All metal core: Full metal handle construction to protect from drops and handle breakage.
• Iron carbide cutting edge for maximum durability. Longer lifetime vs. stainless steel.
• Large handle loops for use with gloves.
• Chrome plated blades for maximum rust protection.
• Jobsite offset scissors with micro-serrated blades for maximum durability and better grip.

General Information

Socket 46mm 1/2"D Socket 46mm 1/2"D.

• Manufactured from Chrome Molybdenum thin wall reduces the chance of damage to surrounding components
• Air impact quality - Single Hex (6pt)
• Total length 50mm / internal length 25mm
• Single sided rear swinging arm rear wheel and sprocket side nuts
• Equivalent to Triumph OEM T3880046Application: Datona 595 / 955 Speed Triple / Sprint ST 955 / 1050 / Tiger 885i / 955

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Chrome finish for corrosion and rust protection.
• Laser engraved size ID for quick and easy identification.
• Precision knurling located on the shaft and female drive end for better control when hand threading.

• Self calibrating
• Auto power off
• Measures tyre tread depth in mm / inch
• Measures pressure in psi / bar / kPa / kgf/cm²

• Tyre Pressure Accuracy: +/- 1.5 % Reading Resolution: 0.1 psi / 0.01 bar / 1 kPa / 0.01 kg/cm² Calibration: 2-100 psi / 0.15-7 bar / 15-700 kPa Tyre Tread Depth Accuracy: +/- 0.2 mm Reading Resolution: 0.01 mm / 0.001 in Calibration: 0-15 mm

• 180 degree rotating flexible heads allow you to apply leverage at any desired angle and get around obstructions in tight areas.
• Premium chrome vanadium steel provides durable life
• Heat treated for maximum strength
• 72 tooth ratchet
• Dual 180 degree swivel ratchet head design
• Mirror Polish Finish

• ASME Compliant

General Information

Propshaft Socket - for Land Rover

• Black phosphate finish
• Designed for access
• Manufactured from impact quality Chrome Molybdenum
• Size: 9/16in. x 150mm
• 1/2in.D

General Information

Camshaft Drive Tensioner Wrench - for VAG

• Use on the latest range of 1.0L, 1.2L and 1.4L belt driven turbo charged engines
• Applications: Seat Mii/Leon, Skoda Octavia/Citigo, Volkswagen Up!/Golf V11, Audi A1/A3
• For adjusting the Camshaft drive belt tensioner as described by the manufacturer
• Use with Engine Timing Tool Kit - Part No 6230
• Measures 30mm (across the flats)

• Sizes: 5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm & 11 mm
• 7 Piece metric nut driver set
• Chrome Vanadium

• Light duty pry bar end
• Alloy scraper
• Robust multi-functional tool
• Hammer, scraper and light duty pry bar end
• Ideal tool for MOT use

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Max 4000 rpm
• Supplied with an adaptor for drill use
• Removes stripes/stickers moulding glue etc
• Fluted abrasive disc

• Gas cartridge sold separately
• For use with G2400 Go System propane gas cylinder
• Fitted with CGA600 connection
• Safety checked and test burned
• Ideal for plumbing, brazing and automotive
• Instantly FLARESAFE; use at any angle
• Solid brass construction
• A durable high power, high temperature (up to 1480 C) fine flame gas torch

• Conforms to BS:EN521

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• QUAD EDGE Tip: unique combination of 135dgsplit point and four cutting edges: 135dgsplit point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
• Suitable for drilling high alloy content steels and metals with tensile strengths over 1000 N/mm² like stainless steel.
• Metal drill bits ground from solid extremely heat resistant 5% cobalt-alloyed high speed steel produced according to DIN 338.
• 3-flat shank from 5 mm for better grip and prevents chuck slippage.
• Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
• Colour: bronze.
• Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.