Workshop Tools

• Fits most UK & European Vehicles
• Programmable Sensor
• 433mhz sensor

• 8″ adjustable wrench (48227508) has an extra wide jaw of 38 mm for increased jaw capacity in confined environments.
• Permanent lasered inch and mm markings for accurate adjustment
• Ergonomic rounded handle design for a comfortable fit in the hand and less pressure points on the palm.
• Precision adjustment screw with accurate threads and tight tolerances. The jaws won't back off during use.
• Parallel jaws won't slip or damage finish surfaces.
• Slim head design for reaching into tight spaces.
• Chrome plating for best-in-class rust protection and increased durability.
• Lanyard hole.

• Slim profile head with flush direction lever offers better accessibility.
• 90 tooth design with 4 °of arc swing for tight work spaces.

• Length (mm): 286
• Length (Inch): 11.25

• Chrome alloy steel, chrome plated.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Durable double stacked pawls for longer ratchet life.
• 144 Ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.

• Strong magnet at start of the tape allows easy hooking onto flat surfaces and round pipe.
• Anti-tear coating reinforces the first 15 cm of the blade.
• Class II accuracy.
• Tool lanyard hole Ready for quick and easy tethering.
• Patented finger stop protects fingers from blade retraction.
• Wire form belt clip reduces pocket tearing.
• 2 sided blade printing increases the readability.
• ABS housing with impact resistant overmold for more comfort and jobsite durability.
• EXO 360 blade technology delivers long lasting rip and wear resistance.
• Up to 4 m standout higher standout for higher efficiency and higher reach.

General Information

Protective Faceshield Bag. Protective Faceshield Bag

• Slim shank diameter for access to low lying screw applications.
• Permanent visible ID markings allows for quick tool identification.
• Landyard hole for easy attachment to a safety system.
• Anti role 3 sided collar on the handle
• VDE tested to 10 000 V and guaranteed to 1,000 V.
• Comfortable Tri-Lobe handle optimized for maximum user comfort and high torque applications.

• Flexible material allows for easy install and removal.
• Form-fitting lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.

• Switch latch for constant power
• Automatic circuit breaker reset
• Auxiliary ground lead holder

• Voltage Detection Range: Detects low to high AC voltages
• Non-Contact Operation: Ensures safety during electrical testing
• LED Indicators: Provides visual feedback for voltage detection
• Compact Design: Small and lightweight for convenient use
• Frequency Compatibility: Operates at standard electrical frequencies
• Durability: Engineered for regular use with robust construction
• Battery Operated: Powered by alkaline batteries
• Compliance: Meets international electrical safety standards.

• Textured nose maintains control when grabbing and twisting with serrated nose.
• Single-joint grip force for more control and better grip compared to double joint.
• Multi-function gripping zones for grabbing a wide variety of materials such as screws, cables and round parts.
• Deep-reach cross handles for increased reach in tight spaces for best access.

General Information

Ratchet Podger Spanner 10mm x 13mm Ratchet Podger Spanner 10mm x 13mm.

• Double sized podger spanner with ratchet mechanism
• Ideal for scaffolding and construction
• High Quality
• Manufactured from Chrome Vanadium

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Anti role, 3 sided collar on the handle
• Hardened magnetic tips for maximum durability and fastener retention.
• Landyard hole for easy attachment to a safety system.
• Permanent visible ID markings allows for quick tool identification.
• Comfortable Tri-Lobe handle optimized for maximum user comfort and high torque applications.
• Wrench ready shank allows extra leverage to be applied.

• 180° pivoting head for greater access to tight spaces.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Chrome alloy steel, chrome plated.
• Durable double stacked pawls for longer ratchet life.
• 144 ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.
• Ink-filled labels for better visibility.

• Simple and easy to use, ideal for general low volume tyre inflation
• Has a durable alloy body and Euro style valve connector, and comes complete with operating instructions
• General purpose tyre inflator with an all Alloy body with a rubber protected gauge

• Reading Accuracy: 2 psi / 0.1 bar / 10 kPa Calibration: 10-210 psi / 0.7-15 bar Maximum Inlet Pressure: 15 bar Hose length: 0.85 m Tyre Valve Connection: Euro Clip-on Inlet Thread: G 1/4 l/min

• Thumb and four finger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.
• Serrated cutting edges prevent slippage when cutting.
• Less hand fatigue when cutting thicker materials. Design with compound leverage action.
• Torsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.
• Chrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.
• Made from forged alloy steel for best durability – Cr Steel.
• One hand locking mechanism.
• Flush slimline design for non-snagging in material.
• Triple cutting direction identification – on the head, handle and by colour coded handle.
• Ergonomic and durable overmoulded grips add comfort and last longer.
• Aviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.

• Part of PACKOUT™ Shop Storage.
• Fully customise your shop according to your needs.
• Most secure and easy mounting with click & lock mechanism.
• Easy and fast access to all tools and items.
• Stores spanners, screwdrivers, screws, drills, sockets, chisels, pry bars and more.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Replacement knuckle joints available (not covered by Lifetime warranty)
• Chrome Vanadium body and Chrome Molybdenum head for extra strength
• Get the extra leverage you need to break loose frozen and stuck nuts and bolts.

General Information

Aluminium Repair System Aluminium Repair System.

• Can be used with standard heat source
• Complete with tinning brush & 5 aluminium rods
• This product will repair any damage to aluminium parts quickly and effectively without using flux or chemicals
• Using a standard heat source these aluminium brazing rods can repair damage to most aluminium parts without using flux or chemicals Brazes all Aluminium Alloys, including Zinc, Magnesium, Pot Metal and Cast Aluminium

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Form-fitting, lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
• Flexible material allows for easy install and removal.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.

• Manufactured from Chrome Molybdenum
• Available in range 22mm - 70mm
• Deep Impact socket
• Part of a range of Deep Impact Sockets in 1in. drive

General Information

Plastic 6mm Chain 25mtrs. Plastic 6mm Chain 25mtrs

• Chain size 6mm x 25mtrs
• Red and White for high visibility
• Use with Laser Posts and Bases - Part 6643/6644

• Lanyard hole.
• 8? adjustable wrench (48227508) has an extra wide jaw of 38 mm for increased jaw capacity in confined environments.
• Permanent lasered inch and mm markings for accurate adjustment
• Parallel jaws won't slip or damage finish surfaces.
• Slim head design for reaching into tight spaces.
• Ergonomic rounded handle design for a comfortable fit in the hand and less pressure points on the palm.
• Chrome plating for best-in-class rust protection and increased durability.
• Precision adjustment screw with accurate threads and tight tolerances. The jaws won't back off during use.

• Personalized Foam Tray
• 90-Degree Tip Angle with 0.090in./2.3 Tip Size, Fits 31 - 82mm Circlip Sizes
• 90-Degree Tip Angle with 0.070in./1.8 Tip Size, Fits 18 - 48mm Circlip Sizes
• 90-Degree Tip Angle with 0.047in./1.2 Tip Size, Fits 12 - 25mm Circlip Sizes
• 90-Degree Tip Angle with 0.038in./1.0 Tip Size, Fits 8 - 18mm Circlip Sizes
• Ergonomic Handle for Added Leverage and Comfort
• Handles Internal and External Circlips
• Heat-Treated for Strength and Durability
• Chrome Molybdenum Steel

General Information

Torch with Heat Shrink Tubing Set 162pc Torch with Heat Shrink Tubing Set 162pc.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Slim profile head with flush direction lever offers better accessibility.
• 90 tooth design with 4 °of arc swing for tight work spaces.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Motorcycle fork oil level adjuster
• Syringed hollow filler
• Aluminium level adjuster
• A quick and accurate way of setting and adjusting fork oil levels
• Quick and accurate
• Time saver

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Impact resistant polymer construction.
• Connects to all Milwaukee PACKOUT™ modular storage.
• Turn the PACKOUT™ into a stationary storage.
• 4 5kg floor mounted weight capacity.
• 22 kg wall mounted weight capacity.
• Multiple mounting configurations.

• High quality hot-forging process provides a performance exceeding ASME standard
• Longer beam provides more torque during use
• Patented anti-slip open end grasps nut tight, zero chamfer box end offer better bite on worn fasteners
• Premium Chrome Finish
• Anti-Slip open end
• Zero chamfer box end
• 9 to19mm

• ASME Compliant

• Lanyard hole for easy attachment to the Milwaukee safety range to allow use at heights.
• Compact keys for access in very confined spaces.
• Size labels directly at the keys for easy and quick identification of the tool.
• Torx ball end allows for 25° access to any torx screw.
• Unique patented twist and lock function case to allow easy access to keys.

• Standard and extended handle lengths for easier access in tight spaces or extra leverage.
• Slim profile head with flush direction lever offers better accessibility.
• Versatile lockable flex head: Switch between 7 locking positions and freely moving head.
• 90 tooth design with 4 degreeof arc swing for tight work spaces.

• Complete with 2 piece adaptor kit for bikes; air beds and other inflatables
• Easy to read digital display
• Compact for easy storage and transportation
• Built in white LED light
• Rechargeable with power bank function
• 4 programmable pressure settings with digital autostop for ease of use
• Inflates bicycle tyre in <2 minutes
• Versatile - Ideal for cars; motorbikes and bicycles

• EU Conforms: Electromagnetic Compatibility - Directive 2014/30/EU Restriction of Hazardous Substances (RoHS) - Directive 2015/863/EU Regulation (EC) No1907/2006 - REACH Machinery Directive 2006/42/EC UK Comforms: Electromagnetic Compatibility Regulations 2016 Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 Regulation (EC) No1907/2006 - REACH Supply of Machinery (Safety) Regulations 2008

• Forged from high quality Chrome Molybdenum alloy steel
• Radius corner design for better gripping of fastener & chamfered openings for faster socket fit over fastener
• Phosphate
• 29, 30, 32, 34, 35, 36 & 38 mm

• Spectral Response 8-14 μm
• Laser <1mW / 630-670nm
• °C / °F Selection

• Temperature Range: -20°C to 500°C (-4°F to 932°F)
• Accuracy: ±3°C for -20°C to 0°C
• ±(2.0% of reading + 2°C) for 0°C to 500°C
• Optical Resolution: 10:1 distance-to-spot ratio
• Spectral Response: 8–14 μm
• Repeatability: ±1°C
• Response Time: Approximately 1 second
• Emissivity: Fixed at 0.95
• Laser Class: Class 2, <1mW, wavelength 630-670nm
• Display: Backlit LCD with MIN, MAX, and AVG readings
• Units: °C/°F selectable
• Auto Power-Off: Turns off after 10 seconds of inactivity
• Power Source: 2 AAA batteries
• Operating Environment: 0°C to 40°C, 10%-90% relative humidity
• Dimensions: 143mm x 99mm x 47mm
• Weight: Approximately 160g (including batteries)
• Safety Compliance: Conforms to EN61326, EN61010-1, EN60825-1, UL STD 61010-1, CSA STD C22.2 No.61010-1.

• Manual provided
• in.Weight: 8.4kg in.
• in.360 degree lifting saddle in.
• in.Fitted with swivel castor wheel for ease of positioning in.
• in.Includes extension handle in.
• Lifting range: 135mm to 330mm

General Information

Flywheel Locking Tool. Flywheel Locking Tool

• Flywheel Locking tool OEM 21-168/303-393
• Flywheel Locking tool adaptor (01) 303-393-02
• Flywheel Locking tool adaptor (01) 303-393-01
• Flywheel locking tool for Ford diesel and petrol engines

• SG2 A18 ER70S-6
• Mild steel welding wire for welding low and medium tensile steels

• Constructed with a 8 Tpi design for fast starts and smooth cuts large gullets for easy chip ejection and a unique carbide blend the TORCH Blades with NITRUS CARBIDE are designed to last the longest and cut the fastest in cast iron / SML pipe and other thi
• This special carbide NITRUS blend is designed to cut 3x longer than existing standard carbide teeth blades.
• Best performance in all thick metals and especially cast iron soil waste and drainage pipes
• 25 mm blade height for improved stability and minimum vibration.
• The TORCH blades with NITRUS CARBIDE teeth is the next generation of carbide technology.
• Thick 1.27 mm robust blade body for precise straight cuts.

• They are used as a general-purpose soft-faced hammer in automotive and general engineering for assembly, repair and maintenance
• These copper hammers have faces that are designed to wear and can be easily replaced as spare faces are available
• Ideal where a heavy blow is required combined with a relatively small striking area
• The malleable Iron head provides the weight for the blow and the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage
• Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft

• Weight: 1975g

• REDLITHIUM™ 1.5 Ah / 2.0 Ah battery packs recharge in 30 min / 40 min or less
• Encapsulated circuit board protects the electronics from dust, moisture and impact
• Progressive charge indication: battery LED's light up incrementally to give feedback on current charge level of battery pack
• REDLITHIUM™ 3.0 Ah / 4.0 Ah battery packs recharge in 60 min / 80 min or less
• Temperature protection electronics optimises the charger rate in extreme temperatures to extend battery life

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Steel reinforced handle for higher durability.
• Precision balanced design and over molded handle for more control and better grip.
• High-performance cover preventing damage to surfaces.
• Steel shot-filled head for increased rebound reduction and maximised impact.

• Chrome-plated shanks reduce corrosion and provide rust protection.
• Comfort grip handle and precision knurling increase tool control and user comfort.
• Supplied in an easy-access storage tray for long-term tool storage.
• All-metal core for long-lasting durability and rust protection.