Workshop Tools
Categories
Important compatibility info
Function | Pipe Cutter |
Type | Pipe Cutter |
Important compatibility info
Length | 465 mm |
Width | 148 mm |
Function | Mounting Tool, bellow |
Weight | 2 kg |
Extra Description | Duraboot |
Type | Mounting Tool, bellow |
Additional Information
Safety information
Safety First Read the operating and safety instruction. Follow them carefully. Maximum safe operating pressure 9 bar (125 psi). Air lines are dangerous - use them correctly Putting into service Before use check cap-retaining screws are secure.If the Air tool is dropped check for cracked components. Check air line pressure before connecting the Air tool.The Air tool should be used only by people trained in the use of pneumatically operated tools. Use Keep hands away from moving parts. Never operate the Air tool near the face or body. Only use Air tool to fit CV boots. If air line pressure exceeds 9 bar fit a regulator. Disconnect the Air tool from the air supply after use.
Installation Information
Operation: 1. Slide boot onto arms, large end first. The arms should just protrude from the small end of the boot. To fit a boot to an inner joint, turn the boot inside out before sliding i onto the Airtools´s arm. 2. Press " + " button until arms open enough to pass over the joint. Keep hands clear of moving parts. The air line can now be disconnected. The arms will remain open until the " - " button is pressed. 3. Place Airtool over CV joint and press release button (" -"). Keep hands away from moving parts. 4. Withdraw the Airtool, leaving the boot in position. Complete the installation in the normal way.
Important compatibility info
12V Charge Capacity (up to) | 20 Ah - 180 Ah |
Charge Rate | 12 A |
6V Charge Capacity (up to) | 20 Ah - 180 Ah |
Trickle Charge | No |
Charging Voltage | 12 V |
Important compatibility info
Title | Analogue Tyre Inflator |
Additional Information
- Complete with 3 piece adaptor kit for bikes, air beds and other inflatables
- Large on/off button for easy use with dirty/greasy hands or in poor lighting conditions
- Flat design gives you maximum stability during use
- Valve cap storage compartment for safe keeping when inflating
- Fitted with 3m power cable and fused 12V DC power plug to help you reach around the vehicle
- Screw stem valve connector helps reach awkwardly placed tyre valves
- Flexible air hose with easy access storage compartment specifically designed to reduce kinks
- 40mm diameter analogue pressure gauge in PSI, BAR, kPA
- Inflates a tyre in 4.5 minutes
Important compatibility info
Additional Information
- Complete with 2 piece adaptor kit for bikes; air beds and other inflatables
- Easy to read digital display
- Compact for easy storage and transportation
- Built in white LED light
- Rechargeable with power bank function
- 4 programmable pressure settings with digital autostop for ease of use
- Inflates bicycle tyre in <2 minutes
- Versatile - Ideal for cars; motorbikes and bicycles
- EU Conforms: Electromagnetic Compatibility - Directive 2014/30/EU Restriction of Hazardous Substances (RoHS) - Directive 2015/863/EU Regulation (EC) No1907/2006 - REACH Machinery Directive 2006/42/EC UK Comforms: Electromagnetic Compatibility Regulations 2016 Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 Regulation (EC) No1907/2006 - REACH Supply of Machinery (Safety) Regulations 2008
Important compatibility info
Title | Digital Tyre Pressure & Tread Depth Gauge |
Additional Information
- Comes complete with a handy storage case
- Range 0-99 psi / 0-7 bar
- Measures in PSI, bar, kpa, Kg/Cm2
- Tread depth gauge to measure tyre tread depth
- Unique 360 degree rotating nozzle and LED light to assist in locating tyre valve
- Dimensions (MM): H 141 x W 40 x D 29
- Weight (kg): 0.094
- Batteries: 2x CR2032 Included
Important compatibility info
Title | Emergency Tyre Kit |
Additional Information
- Comes With A Handy Carry Case To Store Neatly In Your Boot
- Includes: Tyre Inflator, Tyre Pressure Gauge, Tread Gauge, 1 x Pair Of Protective Gloves, 2 x Cleaning Wipes
- 6 Piece Emergency Tyre Kit
- Conforms with relevant Applicable UK Legislation: Electromagnetic Compatibility Regulations 2016 The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulation 2012 Regulation (EC) No1907/2006 - REACH Supply of Machinery (Safety) Regulations 2008 References to the relevant UK Designated Standards used or references to other technical specifications in relation to which conformity is declared: EN 50498:2010
Important compatibility info
Title | Emergency Puncture Repair Tyre Sealant |
Additional Information
- For use on tubeless tyres only
- A temporary repair designed to get you home, no need for any tools or wheel changes
- Larger tyres may require more than one aerosol
- Suitable for tyres up and including 16in.
- 1 aerosol for one tyre, single use product
- Supplied only as a merchandising unit
- Tyre sealant for emergency puncture repair
- Conforms with the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulation 2012. References to the relevant UK Designated Standards used or references to other technical specifications in relation to which we declare: all requirements for product conformity including any testing and inspections are controlled by Ring Quality Assurance Department under the scope of our ISO 9001:2015 Quality Management System.
Important compatibility info
Additional Information
- The Stanley 197483 has 512 different configurations, the Stanley 'Sortmaster' organiser can be customised for storing different sized tools
- Also ideal for stopping movement from one compartment to another during transport
- Can be used also for small items and fixings