Workshop Tools

• 8″ adjustable wrench (48227508) has an extra wide jaw of 38 mm for increased jaw capacity in confined environments.
• Permanent lasered inch and mm markings for accurate adjustment
• Ergonomic rounded handle design for a comfortable fit in the hand and less pressure points on the palm.
• Precision adjustment screw with accurate threads and tight tolerances. The jaws won't back off during use.
• Parallel jaws won't slip or damage finish surfaces.
• Slim head design for reaching into tight spaces.
• Chrome plating for best-in-class rust protection and increased durability.
• Lanyard hole.

• Chrome alloy steel, chrome plated.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Durable double stacked pawls for longer ratchet life.
• 144 Ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.

• Slim profile head with flush direction lever offers better accessibility.
• 90 tooth design with 4 °of arc swing for tight work spaces.

• Length (mm): 286
• Length (Inch): 11.25

• Part of a range of Deep Impact Sockets in 1in. drive
• Deep Impact socket
• Available in range 22mm - 70mm
• Manufactured from Chrome Molybdenum

• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.
• Flexible material allows for easy install and removal.
• Form-fitting, lightweight design protects the tool and work surface while adding minimal size or weight to the tool.

• Once the piston is retracted, then fit new brake pads and/or brake dics.
• This tool kit is used to rotate and press the piston back into the brake caliper at the same time, preventing damage to the gaskets.

• Textured nose maintains control when grabbing and twisting with serrated nose.
• Single-joint grip force for more control and better grip compared to double joint.
• Multi-function gripping zones for grabbing a wide variety of materials such as screws, cables and round parts.
• Deep-reach cross handles for increased reach in tight spaces for best access.

• Inflates a tyre in 3.5 minutes*
• Clear, back lit digital display with high contrast screen
• Easily check how far along the inflation is with the dynamic progress bar
• Memory function remembers the set pressure for next use
• 60cm air hose allows easy access, wherever the tyre valve is positioned
• Bright LED light directed where you need it most
• 3 meter power cable with easy wind-up internal storage
• Valve storage stem to ensure valve caps aren't lost during inflation
• Included 3 piece valve adaptor kit securely stored inside the inflator

• Impact resistant polymer construction.
• Connects to all Milwaukee PACKOUT™ modular storage.
• Turn the PACKOUT™ into a stationary storage.
• 4 5kg floor mounted weight capacity.
• 22 kg wall mounted weight capacity.
• Multiple mounting configurations.

• Slim shank diameter for access to low lying screw applications.
• Permanent visible ID markings allows for quick tool identification.
• Landyard hole for easy attachment to a safety system.
• Anti role 3 sided collar on the handle
• VDE tested to 10 000 V and guaranteed to 1,000 V.
• Comfortable Tri-Lobe handle optimized for maximum user comfort and high torque applications.

• Slim shank diameter for access to low lying screw applications.
• Permanent visible ID markings allows for quick tool identification.
• Landyard hole for easy attachment to a safety system.
• Anti role 3 sided collar on the handle
• VDE tested to 10 000 V and guaranteed to 1,000 V.
• Comfortable Tri-Lobe handle optimized for maximum user comfort and high torque applications.

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening
• Phosphate Outer Finish
• Phosphate Outer Finish

• Chrome Molybdenum Alloy Steel

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• HOOK AND PICK SET 4PC

• Lanyard hole for easy attachment to the Milwaukee safety range to allow use at heights.
• Compact keys for access in very confined spaces.
• Size labels directly at the keys for easy and quick identification of the tool.
• Torx ball end allows for 25° access to any torx screw.
• Unique patented twist and lock function case to allow easy access to keys.

• Gas cartridge sold separately
• For use with G2400 Go System propane gas cylinder
• Fitted with CGA600 connection
• Safety checked and test burned
• Ideal for plumbing, brazing and automotive
• Auto start Piezo ignition
• Swirl flame for more even heat distribution, wrapping around the target
• Instantly FLARESAFE; use at any angle
• A durable high power, high temperature (up to 1610 C) gas torch
• Auto lock on and dead man trigger

• Conforms to BS:EN521

• REDLITHIUM™ 1.5 Ah / 2.0 Ah battery packs recharge in 30 min / 40 min or less
• Encapsulated circuit board protects the electronics from dust, moisture and impact
• Progressive charge indication: battery LED's light up incrementally to give feedback on current charge level of battery pack
• REDLITHIUM™ 3.0 Ah / 4.0 Ah battery packs recharge in 60 min / 80 min or less
• Temperature protection electronics optimises the charger rate in extreme temperatures to extend battery life

• Hook ends
• Compatiable with commercial vehicle applications
• Made with carbon steel

• Temperature Range: -10°C to 60°C
• Burst Pressure: 63 bar (3:1 safety factor)
• Working Pressure (1): 300 psi / 21 bar
• Exceeds: BS EN ISO 2398:1997 (BS 5118:1980)
• Conforms to: ISO 5774:2008 (BS 6066:1981)
• Silicone free
• Resistance to oil and fuels
• Good flexibility and kink resistant
• Excellent abrasion resistance

• Conforms to ISO 5774:2008 (BS 6066:1981)
• ExceedsBS EN ISO 2398:1997 (BS 5118:1980)
• Hose Fittings Vertex Coupling & Standard Adaptor
• Working Pressure (Please note - an increase in temperature above 20°C will affect the working pressure quoted above.) 300 psi / 21 bar
• Burst Pressure 63 bar (3:1 safety factor)
• Temperature Range -10°C to 60°C
• Hose Length 10m
• Hose Inside Diameter 10mm / 3/8 in
• Hose Outside Diameter 17mm

General Information

Aluminium Repair System Aluminium Repair System.

• Can be used with standard heat source
• Complete with tinning brush & 5 aluminium rods
• This product will repair any damage to aluminium parts quickly and effectively without using flux or chemicals
• Using a standard heat source these aluminium brazing rods can repair damage to most aluminium parts without using flux or chemicals Brazes all Aluminium Alloys, including Zinc, Magnesium, Pot Metal and Cast Aluminium

• Simple and easy to use, ideal for general low volume tyre inflation
• Has a durable alloy body and Euro style valve connector, and comes complete with operating instructions
• General purpose tyre inflator with an all Alloy body with a rubber protected gauge

• Reading Accuracy: 2 psi / 0.1 bar / 10 kPa Calibration: 10-210 psi / 0.7-15 bar Maximum Inlet Pressure: 15 bar Hose length: 0.85 m Tyre Valve Connection: Euro Clip-on Inlet Thread: G 1/4 l/min

• Chrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.
• Torsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.
• Less hand fatigue when cutting thicker materials. Design with compound leverage action.
• Serrated cutting edges prevent slippage when cutting.
• Thumb and four finger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.
• Aviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.
• Ergonomic and durable overmoulded grips add comfort and last longer.
• Triple cutting direction identification – on the head, handle and by colour coded handle.
• Flush slimline design for non-snagging in material.
• One hand locking mechanism.
• Made from forged alloy steel for best durability – Cr Steel.

• 180° pivoting head for greater access to tight spaces.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Chrome alloy steel, chrome plated.
• Durable double stacked pawls for longer ratchet life.
• 144 ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.
• Ink-filled labels for better visibility.

• The 39 in 1 precision multi-bit screwdriver features a dual-length shank providing a compact and a standard size. Supplied in a durable PACKOUT™ compatible case designed to get the bits out easily.
• On-board bit storage with double-sided bits in the 4 in 1 Torx precision multi-bit screwdriver and the 27 in 1 precision multi-bit screwdriver for a quick bit switching.
• 360° rotating back cap, giving greater control for speed and precision and optimised for any kind of maintenance applications.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• High quality hot-forging process provides a performance exceeding ASME standard
• Set contains 11 popular 12 points metric sizes for technician
• High visibility color filled size mark for easy identification during use
• Premium Chrome Finish
• 15 degree offset box end
• Anti-Slip and radius corners on open end

• ASME Compliant

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Insulated
• Hardened
• CR-MO
• Combination, Long Nose, Diagonal, Cutting and Wire Stripping
• Comfort non-slip grip

• Deep Metric Socket Set
• 6 Points
• Socket set features mirror polish Chrome-Plated finish for rust resistance

• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Form-fitting, lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
• Flexible material allows for easy install and removal.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.