Workshop Tools

• Chrome alloy steel, chrome plated.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Durable double stacked pawls for longer ratchet life.
• 144 Ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.

• NCCJ30LPF-RW - Rear Wheel Replacement
• NCCJ30LPF-RP - Rubber Pad Replacement
• NCCJ30LPF-P - Hydraulic Pump Replacement
• NCCJ30LPF-H - Handle Replacement
• NCCJ30LPF-FW - Front Wheel Replacment
• NCCJ30LPF-FP - Foot Pedal Replacement

• Form-fitting, lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
• Flexible material allows for easy install and removal.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.
• Not for use on or near live electrical circuits.
• Use on any other product than advised may result in damage to tool motor and may void tool warranty.

• Laser engraved size ID for quick and easy identification.
• Chrome finish for corrosion and rust protection.
• Durable and compact storage rack to optimize space inside the drawer.
• Precision knurling located on the shaft and female drive end for better control when hand threading.
• Wobble functionality provides additional access in tight spaces and can also be used as a standard extension when fully inserted.
• Sockets - Extension Bars

• This set of tools enables the correct timing to be made when servicing the Vauxhall/Opel chain engines fitted to Vauxhall Agila and Corsa with 1.0 12v X10XE and 1.2 16v X12XE engines
• Agila, Astra-G/H, Combo-C, Corsa-B/C/D, Meriva-A, Tigra-B
• For 1.0 12v X10XE and 1.2 16v X12XE engines
• With X10XE, Z10XE, Z10 XEP, X12XE, Z12XE, Z12 XEP, Z14XEL, Z14XEA engine codes
• Chain driven engines
• 1993-2010

• Finger squeeze protection at every position.
• Push button for quick and precise adjustments on the workpiece.
• Box-joint design provides highest durability and larger gripping capacity.
• Nail and wire holder.
• Induction hardened teeth with self-locking serration to not slipp on the workpiece.
• Double toothed jaw for maximum grip.

• NCCJ25F-RW - Rear Wheel Replacement
• NCCJ25F-RP - Rubber Pad Replacement
• NCCJ25F-P - Hydraulic Pump Replacement
• NCCJ25F-H - Handle Replacement
• NCCJ25F-FW - Front Wheel Replacement

• Can be used in extreme temperatures down to -20 °C without compromising on runtime and battery life
• Water protection routes water away from the electronics & out of the battery pack
• REDLITHIUM™ protection with REDLINK™ digital overload protection to prevent users from damaging their cordless power tool investment in abusive situations
• Individual cell monitoring ensures optimal charge and discharge for maximum life
• Durable metal frame battery construction with shock responsive separators preventing pack failure from excessive vibrations or drops
• Delivers up to 2.5x more run time, up to 20% more power and up to 2x more battery life compared with other Lithium-Ion technologies and / or with previous MILWAUKEE® battery technology. (Results depend on tool and application)
• On-board battery fuel gauge helps the user to maximize his battery run-time efficiency

• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.
• Flexible material allows for easy install and removal.
• Form-fitting, lightweight design protects the tool and work surface while adding minimal size or weight to the tool.

• 90 Tooth Ratchet Design allows access to confirmed spaced with a 4 degree arc swing
• Flip lever mechanism provides quick and easy forward or reverse operation.
• Full polish finish prevents corrosion and rust.
• Comfort grip handle helps reduce fatigue while working.
• 4 Degree Arc Swing
• Designed with professional techincians input and application in mind
• Full polish finish

• Exceeds ASME standards by 1.5 times

General Information

Steering Wheel Lockout Cover 500mm

• Easy to use, the device is handheld and the flare type is marked on the cast body. A pipe stopplug is provided and the brake pipe is inserted until it can go no further; this sets the correct length of pipe presented to the punch and ensures a perfectly
• The set includes dies and punches for the two most common brake pipe sizes: 4.75mm and 3/16″ diameter and can produce SAE double flares.
• Under a wheel arch or even underneath the vehicle, its small size, light weight and robust construction makes flaring brake pipes an easy task even when access is difficult.
• The compact design of this new brake pipe flaring tool means that it is particularly suited to onvehicle use, making it very convenient and a real time saver

• Chrome finish for corrosion and rust protection.
• Durable and compact storage rack to optimize space inside the drawer.
• Laser engraved size ID for quick and easy identification.
• Precision knurling located on the shaft and female drive end for better control when hand threading.

• Lacquer finish for exceptional rust prevention.
• Hardened jaws for improved strength and durability.
• Comfort non slip grip provides the user good control when using.
• Push button design allow for quick jaw size changes.
• Professional grade pliers constructed from chrome-moly material
• Comfort non slip handles
• Lifetime Warranty
• Push button design
• Sizes; 170mm - 250mm - 300mm

• Chrome alloy steel, chrome plated.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Durable double stacked pawls for longer ratchet life.
• 144 Ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Comfort non-slip grips
• Hardened cutting edges for strength and durability
• 7.2in. Wire Stripping Pliers
• 8 1/2in. Wire Stripping Pliers
• 6 3/4in. Wire Stripping Pliers

• Set Includes WSCCP, WSCCPLN, WSCCPPG

• Open-End Spanners – 8 mm, 10 mm, 12 mm, 13 mm, 14 mm, 17 mm & 19 mm
• Packed in blow case and EVA foam
• Each spanner is fully insulated to VDE and EN 60900 standards to protect from electric shocks up to 1500V DC and 1000V AC.
• Suitable for electricians(1000V AC safe live working).
• Manufactured from hardened and tempered Chrome vanadium steel.

• Flexible material allows for easy install and removal.
• Form-fitting lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.