Workshop Tools

• FOUR FLAT sides on socket deter rolling.
• Wrench ready FOUR FLAT sides.
• Stamped sizes for easy visibility.
• Chrome finish for easy cleaning and corrosion protection.
• Available sizes: 8-19mm.
• Available sets: 12pc.

• FOUR FLAT sides on socket deter rolling.
• Wrench ready FOUR FLAT sides.
• Stamped sizes for easy visibility.
• Chrome finish for easy cleaning and corrosion protection.
• Available sizes: 8-19mm.
• Available sets: 12pc.

• Flexible material allows for easy install and removal.
• Form-fitting lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.

• Solid and robust construction
• Hand trigger inflate and thumb controlled deflate
• Auto power off
• Backlight
• Long battery life with battery level indicator
• psi, bar kpa units of pressure selectable by button; last selection saved
• Powered by PCL inflation technology and experience
• Suitable for all applications including tyreshop environments
• Low and simple maintenance
• Easy and cost effective to use
• Reliable accuracy (+/- 1 psi up to 60 psi, then 2 psi up to 150 psi) with individual testing and certification
• Large, clear, easy to read LCD display with backlight

• Pressure Range: 5 - 170 psi / 0.34 - 12 bar / 34 - 1200 kPa Maximum Supply Pressure: 218 psi / 15 bar / 1500 kPa Inflation Flow: 910 l/min @ 13 bar supply Battery Life: 1000 hours with backlight off / 40 hours with backlight on Battery Type: 1 x CR2450 (supplied) Hose length: 1.8m Tyre Valve Connection: Euro Clip-on Calibration: 5-170 psi / 0.34-12 bar / 34-1200 kPa

• Equivalent to OE reference: EN-51367, EN-51632, EN-51298
• B10XE/L5Q, B10XFL/LE1, B10XFT/LE1, B10XHL/LE1, B10XL/LWT, D10XE/L5Q, D10XFL/LE1, D10XFT/LE1, B14XE/LV7, B14XFL/LE2, B14XFT/LE2 B14XHL/LE2, B14XHT/LE2, B14XNT/LFE, D14XFL/LE2, D14XFT/LE2, D14XNT/LFE, B15XHT/LFV, D15XHL/LFV, D15XHT/LFV
• C5287 contains the tools required to undertake the Valve Timing Check/ Engine Setting and Locking procedures on 1.0/1.4/1.5 Turbo and Naturally Aspirated Petrol Chain Engines fitted within Vauxhall/Opel applications.
• Vauxhall/Opel
• Adam (M13), Adam Rocks (M13), Astra-K (B16), Corsa-E (X15), Insignia-B (Z18), Insignia-B Country Tourer (Z18), Karl (C16), Karl Rocks (C16), Mokka X (J13) Viva (C16), Viva Rocks (C16)

• Switch latch for constant power
• Automatic circuit breaker reset
• Auxiliary ground lead holder

• Voltage Detection Range: Detects low to high AC voltages
• Non-Contact Operation: Ensures safety during electrical testing
• LED Indicators: Provides visual feedback for voltage detection
• Compact Design: Small and lightweight for convenient use
• Frequency Compatibility: Operates at standard electrical frequencies
• Durability: Engineered for regular use with robust construction
• Battery Operated: Powered by alkaline batteries
• Compliance: Meets international electrical safety standards.

• Internal blade storage for extra blades.
• Supplied with 12″ / 24 Tpi blade.
• Tough metal frame, supports higher tension (25,000 PSi / 250 lbs).
• Will accept up to 12″ blades.
• Overmould handle ensures secure grip and user comfort.

• Length: 14 11/16in. overall
• 32 teeth fixed head w/o quick release
• Torque accuracy CW: +/- 3%, comfort grip handle

• Finger squeeze protection at every position.
• Push button for quick and precise adjustments on the workpiece.
• Box-joint design provides highest durability and larger gripping capacity.
• Nail and wire holder.
• Induction hardened teeth with self-locking serration to not slipp on the workpiece.
• Double toothed jaw for maximum grip.

• Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
• Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
• QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
• Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
• Impact rated drill bit with ¼″ hex shank optimised for impact drivers.

• .Supplied in carrycase.
• Includes straight and right angled quick connect couplings, nine adaptors, Orings and 890mm long hose.
• Accurately tests oil pump pressure and also low oil warning devices.

General Information

High Voltage Floor Matting - 1 Metre. High Voltage Floor Matting - 1 Metre

• Ribbed on the underside fabric impression on upper side
• Tested to IEC611111 Class 2 rated for working voltages up to 17kV
• Flame retardant oil and acid resistant insulated floor matting

• Dimensions: Width 1000mm, Thickness 3.00mm, Weight 4.0kgs per metre

• Personalized Blowcase
• Gauge with 0.01mm Increments
• Shock-Proof Gauge
• Transverse Arm for Fine Adjustment
• Identifies Vertical and Lateral Wobble
• 3-Point Clamp Stand for Safe Mounting onto Shock Absorber
• Measures Radial and Axial Offsets on Brake Discs

• Plastic Carry Case With Foam Inlay
• Includes Product Identification & Help Guide
• Fit & Remove TPMS Components With Ease
• Specialist TPMS Hand Tools Kit To Cover All Bases When Fitting & Removing Sensors
• Includes Low Limit Torque Wrench, TPMS Sealing Grommet Removal & Fitting Tool, Pre-Torqued Valve Core Tool, 11mm & 12mm Deep Sockets, Selection Of Torx Bits Presented In Plastic Case With Foam Inlay

• Radius corner on working end provides higher torque and better gripping of fastener
• Chamfered drive opening allows a quicker connection between socket and fastener
• Mirror polish chrome-plated finish prevents rust
• Knurled teeth on bottom of socket improve grip when handling
• Chrome Vanadium Alloy Steel

• Standard and extended handle lengths for easier access in tight spaces or extra leverage.
• Slim profile head with flush direction lever offers better accessibility.
• Versatile lockable flex head: Switch between 11 locking positions and freely moving head.
• 90 tooth design with 4 degreeof arc swing for tight work spaces.

• Flexible battery system: works with all MILWAUKEE® M18™ batteries
• Protected against splashing water at all angles (IP24)
• 2 adjustable metal hooks for hanging in vertical and horizontal position
• Pivoting 45° forward & backward head allows for 180° coverage
• TRUEVIEW™ high definition lighting
• Thanks to its compact design it operates in locations other lights cannot
• Three LED design with 2 light settings provides 300 lumens on High and 130 lumens on Low setting

• Designed for use with the part numbers 77099 and 77066 with the wheels on and the vehicle sitting on the ground
• Fully adjustable for wheels up to 18 inch diameter and designed to hang on the tyre giving hands free operation
• Can be used without the top bracket (held in place by hand) for vehicles with a low wheel arch
• Ideal for quick checking of camber, caster and KPI when used with Gunson 77099/77066

• FOUR FLAT sides on socket deter rolling.
• Wrench ready FOUR FLAT sides.
• Stamped sizes for easy visibility.
• Chrome finish for easy cleaning and corrosion protection.
• Available sizes: 12-24mm.
• Available sets: 13pc.

• Slim profile head with flush direction lever offers better accessibility.
• 90 tooth design with 4 °of arc swing for tight work spaces.

General Information

Diesel Injector Puller

• Saves time and money when injectors are difficult to remove
• Incorporating a slide hammer
• Presented in a handy blow mould case
• Diesel Injector Puller with M8/M12/M14 adaptors Assists removal of stubborn Bosch and Lucas diesel injectors

• Citroën: Relay/Jumper III (06-14), Relay/Jumper III (14-): Fiat: Ducato (06-12), Ford: Focus ('98), Mondeo (00), Ranger ('12), Tourneo Custom, Transit ('06), Transit ('14), Transit (00), Transit Custom Jaguar: X-Type (X400)(01-10), Land Rover: Defender, LDV: Convoy, LTI: TXII (02-06), Mazda: BT-50 (UP)(12-), Peugeot: Boxer III (06-14), Boxer III (14-)
• Equivalent to OE reference: 303-682, LDV177, 303-679A, LDV170, 3003-1587, 0198.N, 2.000.018.700, 0198.B2, 2.000.016.500, LDV167, 0198.J, 303-698, 303-675, 303-1562
• ABFA, D3FA, D5BA, D6BA, F3FA, FIFA, FMBA, FMBB, HJBA, HJBB, HJBC, HJBE, N7BA, N7BB, SDBA, CVF5, CVFF, CVR5, CVRA, CVRB, CYF5, CYFA, CYFB CYFC, CYFF, CYFG, CYR5, DRF5, DRFA, DRFB, DRFC, DRFF, DRFG, DRR5, DRRA, DRRB, GBVAJ(QW2R), GBVAJPF, GBVAJQW, MZ-CD, P8FA, P8FB, PGFA PGFB, QJBA, QJBB, QJBC, QJBD, QVFA, QWFA, SRFA, SRFB, SRFC, SRFD, SRFE, UHFA, UHFB, UHR5, USR6, USRA, USRB, UYR6, 4HG, 4HG (P22DTE), 4HH 4HH (P22DTE), 4HJ, 4HJ (P22DTE), 4HM, 4HM (P22DTE), 4HU, 4HU (P22DTE), 4HV, 4HV (P22DTE), BG, CRFF, CVF5, CVFF, CVR5, CVRA, CVRB, CYF5, CYFA, CYFB CYFC, CYFF, CYFG, CYR5, CYRA, CYRB, DRF5, DRFA, DRFB, DRFC, DRFG, DRR5, DRRA, DRRB, GBVAJ(QW2R), GBVAJPF, GBVAJQJ, GBVAJQJ (QJ2R), GBVAJQJ (QJ2S) GBVAJQJ (QJ2W), GBVAJQW, GBVAJQW (QW2S), GBVAJQW (QW2W), ID4/DT224, MZ-CD, P22DTE, P22DTE (4HG), P22DTE (4HH), P22DTE (4HJ), P22DTE (4HM) P22DTE (4HU), P22DTE (4HV), P8FA, P8FB, PGFA, PGFB, QJ2R, QJ2S, QJ2W, QJBA, QJBA (BG), QJBB, QJBC, QJBD, QVFA, QW2S, QW2W, QWFA, SRFA, SRFB, SRFC SRFD, SRFE, UHFA, UHFB, UHR5, USR6, USRA, USRB, UYR6, 244DT, D2FA, D2FB, D4FA, DOFA, F4FA, FXFA, H9FA, H9FB, H9FD, JXFA, JXFC, PD24P, PHFA, PHFC, ZSD 424 MZ-CD, SA2R, SA2S, SA2W, SAFA, SAFB
• C5279 contains the tools to enable the setting and locking of the engine to be undertaken during Timing Chain replacement and also the resetting of the position of the Crankshaft Sensor Carrier during Engine reassembly procedures.
• Citroën, Fiat, Ford, Jaguar, Land Rover, LDV, LTI, Mazda, Peugeot

• Can also be used on cooling systems hoses.
• Features a pressure gauge with shut off valve and pressure release valve.
• Kit supplied with 8 stepped adaptors to fit most hose sizes.
• Used in conjunction with an air line to show the presence of leaks
• sizes; 35 to 95mm