Workshop Tools

• Rotary hammer dust extraction solutions.
• Outlet nozzle: ⌀ 37 mm outside / ⌀ 32 mm inside. Replacement sealing lips (2 pcs): 4931448564. Replacement brush: 4931448565
• Brush insert to improve suction and extraction. Brushes to be removed for coring applications.

• Anti-roll, 3 sided collar on the handle
• Wrench ready shank allows extra leverage to be applied
• Comfortable Tri-Lobe handle optimized for maximum user comfort and high torque applications
• Hardened magnetic tips for maximum durability and fastener retention

• The 90 tooth count gear allows 4 degree arc swing.
• This design provides an incredibly precise turning radius for work in tight spaces.
• Full polish chrome finish on each wrench resists corrosion while maintaining the look and feel of a new product.
• Features a non-slip ratchet end and non-slip open end.

• Carlyle Metric Stubby Ratcheting Wrench Set (12 Pieces)

• FOUR FLAT sides on socket deter rolling.
• Wrench ready FOUR FLAT sides.
• Stamped sizes for easy visibility.
• Chrome finish for easy cleaning and corrosion protection.
• Stored on a socket rail for better tool organization.

• Type M: Cone for angled edges and narrow contours.
• Type H: Flame for contouring.
• Type D: Ball for milling holes and creating concave cuts.
• Type C: Cylindrical ball nose for top and side cutting.
• Includes: Types B ,C ,D, H, M.
• Suitable for unhardened and hardened steel, cast iron and non ferrous metals (aluminium, brass, copper).
• Double cut toothing geometry ensures excellent material removal, low vibrations for easier handling and smaller swarfs.
• According to DIN 8033.

• Ultra light robust housing from special plastic
• Includes 1/4in. coupling connector
• Cold insulated handle
• No additional lubricant necessary
• Air pressure is regulated through a button
• Expanding of the joint arms through pneumatic air
• For CV joint boots diameter from 20 120 mm
• Suitable for all universal and original vehicle CV joint boots
• Air exhaust through the handle rear end

• Part of the PACKOUT™ modular storage system.
• IP 65 rated weather seal to keep out rain and jobsite debris.
• Enough storage capacity to fit power tools like circular saws, grinders, drill drivers.
• 34 kg weight capacity.
• Constructed with impact resistant polymers for jobsite durability.
• Quick-Adjust Dividers allow users to store and organize larger equipment and accessories, such as fittings, connectors or caulk.

General Information

Timing Tool Kit - 1.3 JTD/HDi Fiat, GM, Suzuki, Ford, PSA

• Application: 1.3 JTD/HDi Diesel engines found in Fiat, GM, Suzuki, Ford, Citroen Nemo and Peugeot Bipper
• Timing tool kit with Camshaft/Crankshaft alignment tools only
• Made in Sheffield
• Full Engine rebuild kit available part number 4773
• Use 6408 (Camshaft Holding Tool) if removing camshaft drive gears

• Professional quality
• Twin hold on connector
• PSI/BAR (1 BAR = 100kPa)
• Rubber boot protection for gauge
• Easy to read gauge

• 3/8 in drive torquew wrench
• High torque accuracy allows for high degree of precision in working conditions
• Handle provides strong, durable and comfortable hand hold
• Allows for percise tightning in a single direction
• 45 Teeth Flex Head
• Comfort Grip Handle
• One Way Click Design (Clockwise)

• 45 Teeth Flex HeadTorque Accuracy CW: +/- 3%
• 20 TO 100LBF.FT
• 27 TO 135Nm

• This set of tools enables the correct timing to be made when servicing the Vauxhall/Opel chain engines fitted to Vauxhall Agila and Corsa with 1.0 12v X10XE and 1.2 16v X12XE engines
• Agila, Astra-G/H, Combo-C, Corsa-B/C/D, Meriva-A, Tigra-B
• For 1.0 12v X10XE and 1.2 16v X12XE engines
• With X10XE, Z10XE, Z10 XEP, X12XE, Z12XE, Z12 XEP, Z14XEL, Z14XEA engine codes
• Chain driven engines
• 1993-2010

• 3 in 1 combination HSS-G drill bit: drilling, threading and deburring in one single operation.
• Suitable for use with battery powered or corded drills.
• Reception: ¼″ hex, E6.3.
• Impact rated : suitable for use with cordless impact drivers when keeping to recommended drilling speed.
• Thread type: metric ISO-thread DIN 13.
• Suitable for drilling in plastics, sheet steel and non-alloyed material up to 800 N/mm².
• Always use a suitable cutting oil.

• Slim profile head with flush direction lever offers better accessibility.
• FOUR FLAT™ sides on socket deter rolling.
• All metal design for maximum durabilty.
• Sockets are stamped with measurements on the flat side for easy-to-read visibility.
• Comes with a removable inner tray perfectly designed to be stored.
• 90 tooth design with 4 °of arc swing for tight work spaces.

• BPW 6.5 9 tons
• Overall length: 70mm
• Size: 3/4in.Drive x 95mm (oval)
• Designed for extracting the rear axle cover

• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• According to DIN 3129 / ISO 2725-2 internal square drive according to DIN 3121 / ISO 1174-2.
• Laser etched size markings for easy identification and won‘t wear off.
• Recessed corners allow torque to be transferred across the flats of the socket rather than producing stress on the points or corners.
• 6 gripping points for best precise fit.