Workshop Tools
Categories
Important compatibility info
Title | 1/4in. Drive 76mm extension -1pc |
Additional Information
- Precision knurling located on the shaft and female drive end for better control when hand threading.
- Laser engraved size ID for quick and easy identification.
- Chrome finish for corrosion and rust protection.
Important compatibility info
Title | Welding Tips - 0.6mm - 250 - Pack of 10 |
Additional Information
- Contact tips for welding with welding wire in torches
Important compatibility info
Additional Information
- S2 BIT material for strength and durability
- mirror polish chrome plated CR-V socket resist rust
Important compatibility info
Additional Information
- S2 BIT material for strength and durability
- mirror polish chrome plated CR-V socket resist rust
Important compatibility info
Title | 3/8DR M14 MULTSPLINE BIT 40MM LONG |
Additional Information
- Hardened steel BIT with black oxide finish
- mirror polish chrome plated CR-V socket resist rust
- precision designed bit tip
Important compatibility info
Title | Impact Socket - 24mm - 1/2in. Drive |
Additional Information
- Standard socket for use with air impact tools
- Range: 10mm - 32mm
- 6pt (single Hex)
- Manufactured from Chrome Vanadium
Important compatibility info
Title | Hex socket ShW 3/8 STD 19mm-1pc |
Additional Information
- SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
- Best fitting thanks to 6 gripping points.
- Non-slip hex geometry to prevent socket and fastener rounding.
- Stamped and ink filled diameter markings and laser etched part number for wear resistance.
- Dual hole design and groove for security accessories.
Important compatibility info
Title | Budget 1 Ltr Compression Sprayer |
Additional Information
- Standard quality compression sprayer
- Very mild chemical resistant
- 1.5 Litre compression sprayer
Important compatibility info
Title | Socket - Shallow - Metric Standard - 1/2in. Dr - 26 mm |
Additional Information
- Full polish chrome finish provides rust resistance
- Non-Impact
- 1/2 in. Drive
- 6 Points
Important compatibility info
Additional Information
- Manufactured with case-hardened mild steel and a zinc-plated finish
Important compatibility info
Title | Socket - Hex Metric Standard - 3/8in. Dr - 12 mm |
Additional Information
- S2 Bit Material for strength and durability
- Mirror polish chrome plated CR-V socket resist rust
Important compatibility info
Title | Hex socket ShW 3/8 deep 18mm-1pc |
Additional Information
- SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
- Best fitting thanks to 6 gripping points.
- Non-slip hex geometry to prevent socket and fastener rounding.
- Stamped and ink filled diameter markings and laser etched part number for wear resistance.
- Dual hole design and groove for security accessories.
Important compatibility info
Title | 3/8DR M16 MULTISPLINE BIT 40MM LONG |
Additional Information
- Hardened steel BIT with black oxide finish
- mirror polish chrome plated CR-V socket resist rust
- precision designed bit tip
Important compatibility info
Title | Extension/Socket - 1/2in. Dr - 2in. Long |
Additional Information
- Mirror polished Chrome plated finish
- Chrome Vanadium
- 1/2in. Drive
- 2in. Long
- .198 lbs
Important compatibility info
Title | Socket Adaptor - 1/2in. > 3/8in. Drive |
Additional Information
- By their nature reducers are vulnerable and care should be taken when in use
- Locking function
- Manufactured from Chrome Vanadium
Important compatibility info
Title | Spline Socket - Metric - 1/2in. Dr - M12 |
Additional Information
- S2 bit material for strength and durability
- Mirror polish chrome plated CR-V socket resists rust
- Zinc phosphate bit finish for strength and durability
Important compatibility info
Important compatibility info
Title | Air Blow Gun - 150mm - 1/4in. BSP Fitting |
Additional Information
- Useful for removing dust, swarf and residue from accessible or hidden areas
- The trigger allows you to regulate the amount of air flow giving you greater control
- Constructed from tough nylon plastic complete with steel nozzle
- 150mm nozzle
- 1/4 BSP fitting
Important compatibility info
Title | Hex socket ShW 3/8 deep 9mm-1pc |
Additional Information
- SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
- Best fitting thanks to 6 gripping points.
- Non-slip hex geometry to prevent socket and fastener rounding.
- Stamped and ink filled diameter markings and laser etched part number for wear resistance.
- Dual hole design and groove for security accessories.
Important compatibility info
Title | Spark Plug Socket - 21mm - 1/2in. Drive - Bi-Hex |
Additional Information
- Standard spark plug socket for most modern cars
- Bi Hex
- 1/2in.D
- Manufactured from Carbon Steel
Important compatibility info
Title | INKZALL liquid paint marker black |
Additional Information
- Permanent markers. Markings last up to 6 months.
- IMPORTANT: Shake the marker with the cap on. Remove the cap and carefully pump it up and down until ink flows into the nib.
- Valve action marker.
- Marks on dark surfaces where traditional markers would not be easily visible.
- Water and UV resistant markings.
- Metal barrel for construction site durability.
- Durable acrylic nib for the most demanding environmental conditions: surface temperature from -10dgup to + 145°.
- Can be used on rough dirty and greasy surfaces.
- For use on concrete black pipe aluminium PVC steel & stainless steel rubber and tyres.
- 10 seconds dry time.
- Xylene-free paint.
Important compatibility info
Additional Information
- General purpose mask for light protection
- Suitable for home DIY and also for light air pollution
- Lightweight for added comfort
- Ideal for protection in dusty environments
Important compatibility info
Important compatibility info
Title | Hex socket ShW 3/8 deep 10mm-1pc |
Additional Information
- SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
- Best fitting thanks to 6 gripping points.
- Non-slip hex geometry to prevent socket and fastener rounding.
- Stamped and ink filled diameter markings and laser etched part number for wear resistance.
- Dual hole design and groove for security accessories.
Important compatibility info
Title | Combination Spanner - Metric Spanner - 18 mm |
Additional Information
- Mirror polished Chrome plated finish
- 12 Point
- Radius cornered offset chamfered box end provides precise fastener control
- 15 degree angled open end for greater access
Important compatibility info
Title | Carlyle Metric 12 Point Long Non-Slip Combination Wrench - 18 mm |
Additional Information
- Mirror polish chrome-plated finish resists rust while 12-point, 15 Degree offset box ends provide precise fastener control. Non-slip jaw designs allows for higher torque and turning power in tough applications. Includes storage rack.
- Wrenches are technician's first choice for getting the job done and come backed by unwavering commitment to detail and uncompromising quality from top to bottom of each product. Long panel wrenches feature an aggressive non-slip design.
- Each wrench is constructed from chrome vanadium high alloy steel and is produced using a precision hot forging process with extra emphasis on special heat treatment to provide maximum strength and durability.
- Long panel wrenches provide additional reach and leverage on stubborn fasteners and feature an aggressive non-slip design.
- Carlyle Metric 12 Point Long Non-Slip Combination Wrench - 18 mm
Important compatibility info
Title | Deep Impact Socket - 17mm - 1/2in.Drive |
Additional Information
- Deep Impact socket for use with air impact tools
- Supplied loose
- Range 10mm-32mm
Important compatibility info
Title | Hex Key Set - 10 Piece |
Additional Information
- Comes complete with a clip holder
- Black anodised for long life
- Manufactured from Chrome Vanadium
- Size range: 1.5mm to 10mm
Important compatibility info
Title | Hex socket ShW 3/8 deep 14mm-1pc |
Additional Information
- SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
- Best fitting thanks to 6 gripping points.
- Non-slip hex geometry to prevent socket and fastener rounding.
- Stamped and ink filled diameter markings and laser etched part number for wear resistance.
- Dual hole design and groove for security accessories.
Important compatibility info
Title | Welding Tips - 0.8mm - 250 - Pack of 10 |
Additional Information
- Contact tips for welding with welding wire in torches