Workshop Tools

• 6, 12, 24volt
• Spare bulbs Part No 2954 (2)
• CE certificated For automotive use only
• For use on 6V/12V/24V vehicles
• Brass finished circuit tester

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Abrasive Belts are suitable for M12 FBFL10 and M12 FBFL13.
• Ceramic grain produces low heat, preventing metal discolouration on stainless steel.
• Suitable for all metals (steel, non ferrous metals, aluminium, titanium and stainless steel).
• For grinding metal weld seams, contours, edges and profiles.
• Ceramic grain quality: Extremely high removal rate with best lifetime.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Part of PACKOUT™ Shop Storage.
• Constructed with impact resistant polymers.
• Fits in PACKOUT™ Organiser (4932464082) & PACKOUT™ Compact Organiser (4932464083).
• Hangs on PACKOUT™ Wall Mounting Plates.
• Stores screws, tapes and other small items.

• Long panel wrenches provide additional reach and leverage on stubborn fasteners and feature an aggressive non-slip design.
• Each wrench is constructed from chrome vanadium high alloy steel and is produced using a precision hot forging process with extra emphasis on special heat treatment to provide maximum strength and durability.
• Wrenches are technician's first choice for getting the job done and come backed by unwavering commitment to detail and uncompromising quality from top to bottom of each product. Long panel wrenches feature an aggressive non-slip design.
• Mirror polish chrome-plated finish resists rust while 12-point, 15 Degree offset box ends provide precise fastener control. Non-slip jaw designs allows for higher torque and turning power in tough applications. Includes storage rack.

• Carlyle Metric 12 Point Long Non-Slip Combination Wrench - 8 mm

• Easy Release handle mechanism
• Comfort grip handle
• Heat treated CR-V jaws and CR-MO handle material for added strength and durability

• Ergonomic Handle for Added Leverage and Comfort
• Heat-Treated for Strength and Durability
• Chrome Molybdenum Steel
• 90-Degree Tip Angle

• Extends up to 120mm
• Can also be used with 21mm spanner
• Strap filter wrench can be used in awkward areas with the help of any 1/2in. drive ratchet, power bar or extension bar

• High-visibility colour for easy location
• Special jaws will not damage internal hose lining
• Lightweight, non-conductive
• Can be used on brake, vacuum, heater and all other flexi hoses

General Information

Telescopic Stainless Steel Mirror 6.3 X 4.5cm Telescopic Stainless Steel Mirror 6.3 X 4.5cm.

• Angled for increased applications
• Soft Grip handle
• Extends from 228mm to 717mm
• Unbreakable mirror

• Measures 63mm x 45mm

General Information

Air Bag Test Resistor Set. Air Bag Test Resistor Set

• Follow all health and safety guidance for air bags
• The tool is a 2.5 ohms resistor with two pin probes and when connected to the associated wiring effectively becomes a “dummy” airbag
• Connect in place of the air bag unit to allow the system to test for easy confirmation of component failure
• Assists in the diagnosis of a failed air bag unit, failed airbag clock spring, seat-belt pre-tensioners, etc.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT™ sides.
• FOUR FLAT™ sides on socket deter rolling.

• Precision designed tamper proof 5 star tips ensure eccurate fastener fit
• Includes color coded rail for convenient storage and identification
• TS8H, TS10H, TS15H, TS20H, TS25H, TS27H, TS30H, TS40H, TS45H, TS50H & TS55H
• Mirror polished Chrome plated finish

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Teardrop slim ratchet type
• 6 Deg. / 60 Teeth Swing Arc Ratchet
• Polished Chrome

• Qty: 25
• 90 Degree Angle Profile
• Metric Thread

General Information

Feeler Gauge Imperial/Metric - 32 Blades Feeler Gauge Imperial/Metric - 32 Blades.

• Imperial Sizes: 0015/002/0025/003/004/005/006/007/008/009/010/011/012/015/016/017/018/ 019/020/021/022/023/024/025/026/028/030/032/035in.
• Brass: 0010in./254mm
• Metric sizes: 038/051/063/076/102/127/152/178/203/229/254/279/305/381/406/432/457/ 483/508/533/559/584/610/635/660/711/762/813/889mm
• 32 blade 0038-0889 Metric and 00015 - 0035 Imperial Plus Brass 0010-0254 for use on the reluctor air gap on electronic ignition systems where non-metallic blades are required