Workshop Tools

• Black phosphate finish
• Part of a range 6mm-46mm
• Manufactured from Chrome Vanadium
• Single sized

General Information

Engine Timing Tool Set - Vauxhall/Opel Engine Timing Tool Set - Vauxhall/Opel.

• LUH/A14NEL, LUJ/A14NET, LUJ/A14NEL, L2Q/A12XEL, LDC/A12XER, LWD/A12XEL, LDD/A14XEL, LDD/A14XER
• LUJ/A14NET, LDD/A14XER, LUJ/A14NET, LUH/A14NEL, LUJ/A14NET, LUJ/A14NEL, L2Q/A12XEL, LDC/A12XER, LWD/A12XEL, LDD/A14XEL, LDD/A14XER
• Made in Sheffield
• Engines 1.0/1.2/1.4 - Packed in a foam tray in a metal box
• Application: Adam, Ampera, Astra-J, Aveo, Corsa-D, Insignia, Meriva-B, Mokka, Zafira-C Tourer
• Engine Codes LWD, L2Z, LDD, LUU/A14XFL, LDD/A14XER, LDD/A14XEL, LUJ/114NET, LUJ/A14NEL, A10XEP, A12XEL, A12XER, A14XEL, A14XER, A14NEL, LUJ/A14NET, LDD/A14XER, LUJ/A14NET

General Information

Engine Timing Tool Kit - Alfa Romeo/Fiat Multiair. Engine Timing Tool Kit - Alfa Romeo/Fiat Multiair

• Fiat Punto Evo/Punto/ Bravo 2009-2013 with engine codes 198A7.000/955A6.000, Lancia Delta 2010-2013 with engine code 955A7.000
• Applications: Alfa Romeo Mito/Giulietta Multiair105/Multiair Turbo135/163/170 from 2009-2013 with engine code/955A6.000/955A2.000/955A7.000/955A8.000/940A2.000
• Supplied in metal storage case with instructions and application list

General Information

Pry Bar 300mm. Pry Bar 300mm

• Soft ergonomic grip handle
• Go thru strength
• Blade manufactured from Chrome Vanadium

• Blade width: 15mm
• Length: 300mm

General Information

Thread Insert M10x1.5 - Pack 12. Thread Insert M10x1.5 - Pack 12

• Ideal for inserting into areas that will experience repeat thread wear
• For use with Laser thread insert kits
• Pack of 12

• Fitted with a swivel connector and swivel head
• 0-60 psi/0-4 bar - Holds pressure until valve is released
• Liquid filled gauge - Diameter of gauge 2.5in.
• 550mm reach

General Information

Torch with Heat Shrink Tubing Set 162pc Torch with Heat Shrink Tubing Set 162pc.

• Pressure release function. 45° chuck with 360° swivel, Stainless steel flexi hose (330mm) and rubber boot
• Tyre depth measurement 0- 10mm
• Accuracy plus/minus 3%
• 0-130 psi (0-800kpa) - (1BAR=100kpa)
• Dual faced gauge 50mm diameter

General Information

Insulated Safety Clamp 1000v

• Dimensions: Length 140mm
• For use with insulated shrouding to hold the shroud in situ
• Jaw opening 45mm
• Rubber contacts in the jaw protect the insulating shroud
• Weight 52 grams

General Information

High Voltage Floor Matting - 1 Metre. High Voltage Floor Matting - 1 Metre

• Flame retardant oil and acid resistant insulated floor matting
• Tested to IEC611111 Class 2 rated for working voltages up to 17kV
• Ribbed on the underside fabric impression on upper side

• Dimensions: Width 1000mm, Thickness 3.00mm, Weight 4.0kgs per metre

General Information

Glove Storage Bag. Glove Storage Bag

General Information

Cable End Shroud with Grip Collar - 15mm. Cable End Shroud with Grip Collar - 15mm

• 15mm diameter opening x 100mm length
• Also available: 25mm x 110mm length and 35mm x 130mm length
• Flexible gripping collar prevents damage to the cable insulation
• Push on shrouds for un-insulated cable ends - 1000v insulated
• Will also fit over cable connectors and lugs

General Information

Cable End Shroud with Grip Collar - 35mm. Cable End Shroud with Grip Collar - 35mm

• 35mm diameter x 130mm length
• Also available: 15mm x 100mm length and 25mm x 110mm length
• Flexible gripping collar prevents damage to the cable insulation
• Push on shrouds for un-insulated cable ends - 1000v insulated
• Will also fit over cable connectors and lugs

General Information

Protective Faceshield Bag. Protective Faceshield Bag

General Information

Plastic 6mm Chain 25mtrs. Plastic 6mm Chain 25mtrs

• Chain size 6mm x 25mtrs
• Red and White for high visibility
• Use with Laser Posts and Bases - Part 6643/6644

General Information

Glow Plug Socket Set 1/4"D 3pc Glow Plug Socket Set 1/4"D 3pc.

• Sizes: 8mm, 9mm, 10mm
• Features 1/4in. Drive and universal joint
• Manufactured from Chrome Vanadium
• Super slim for improved access in tight areas

General Information

Spanner Extension Wrench Spanner Extension Wrench.

• Gloves and goggles should be used in high powered situations
• Manufactured from Chrome Vanadium with high Chromed finish
• Universal use
• Length 385mm
• Extends the length of spanners when you need more leverage

General Information

Flameless Hot Air Blower. Flameless Hot Air Blower

• Net weight without gas 68 grams. Dimensions 110 x 27 x 85mm
• Fueled by 5.5ml butane gas which is available from newsagents and supermarkets (cigarette lighter gas)
• Includes heat shrinking tubes
• Run time approximately 20-25 minutes (at mid setting)
• Variable heat/temperature range up to 650 degrees C
• Features: Instant electronic ignition, refillable tank with see through window, stable catalytic heating system. Stable catalystic heating system

• Variable heat/temperature range up to 650 degrees C
• Run time approximately 20-25 minute
• Net weight without gas 68 grams
• Dimensions 110 x 27 x 85mm

General Information

Cambelt Timing Tool Kit Ford 1.0GTDI Cambelt Timing Tool Kit Ford 1.0GTDI.

• Made in Sheffield
• Camshaft Locking blocks are EU Registered design
• Where the VCT pulleys require removing or setting the additional kit Part 6291 will be required

• Applications: Ford 1.0lt 3cyl Turbo charged EcoBoost engine from 2012<
• Equivalent to OEM 303-732, 303-1054, 303-1602, 303-1603, 303-1604, 303-1605/1, 303-1605/2
• GTDi engines found in Ford B-Max, C-Max, Fiesta, Focus, Grand C-Max, Transit Connect

General Information

Oil Filter Wrench Set 3/8"D 2pc

General Information

Sharks Teeth Spanner Organiser - 20 Spanners

• 420mm long (595mm version available - Part No 6976)
• Two individual strips for spanner length selection
• Holds 20 Spanners
• Manufactured from composite material with adhesive strips
• Ideal for organising tool cabinet drawers
• Sharks teeth spanner organiser takes 20 spanners 420mm long

General Information

Sharks Teeth Spanner Organiser - 35 Spanners

General Information

Plastic Sump Plug Removal Tool PSA/Ford

General Information

EU Registered Design

• Contents include 5 x 1/4in. Drive UJ Sockets: E4, E5, E6, E7, E8 x 40mm long
• 4 x 3/8in. Drive: E10, E12, E14, E16 x 60mm long
• Manufactured from Chrome Molybdenum
• Fully polished finish
• Supplied in EVA foam with clear lid

General Information

Pulley Holding Tool Set - VAG

• Complete set of adaptors including 4.8mm, 6mm, square 15mm x 6mm, square 15mm x 12mm, cup 13mm x 17mm , cup 16mm x 20mm, Spline M10, M12
• Equivalent to OEM tools T10172A (T10172) and T10554
• Designed to hold camshaft, crankshaft, oil pump and water pump pulleys and sprockets while loosening and tightening the fixing bolts

General Information

Vibration Damper Pulley Puller - Ford 2.0 Ecoblue TDCi. Vibration Damper Pulley Puller - Ford 2.0 Ecoblue TDCi

• Performs the function of OEM 205-295 (puller), 204-158-01 (crankshaft nose protector spigot) for the applications listed only
• Application: Ford Transit, Transit Custom and Tourneo Custom Ecoblue TDCi, AWD, FWD, RWD 2016 onwards Engine codes: YLFS, YMFS, YNFS, YLF6, YMF6, YNR6, YMR6, YLR6, YNF6
• Removes the front pulley to gain access to the timing belt area

General Information

Diesel Injector Remover - VAG TDi

• No solenoid removal required
• Use in accordance with OEM instructions
• Equivalent to: OEM T10402, T10415
• Engines: 1.6L TDi CR diesel & 2.0L TDi
• Applications: Volkswagen Golf 2009, Seat Ibiza 2008, Altea 2009, Leon 2009, Altea XL 2009, Altea Freetrack 2009, Toledo 2013 and Audi A3 2009/2013
• Diesel injector remover for VAG vehicles fitted with 1.6 & 2.0 CR TDi engines

• Ratcheting, self adjusting mini brake pipe cutter ideal for restricted access
• 4.75mm (3/16in.) with ratchet handle
• Automatic self adjusting for faster cutting
• Extra leverage due to handle length over standard cutter. To further increase leverage use the ¼” drive square in the end of the handle
• Fast and accurate operation, ideal for under vehicle use

General Information

Steering Wheel Lockout Cover 500mm

General Information

Brake Caliper Cleaning File Double Sided

• Flexible battery system: works with all MILWAUKEE® M18™ batteries
• The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering outstanding power, run time and durability
• Line-lock-out function to prevent automatic start up
• Rubber front provides most comfortable handling
• Lower angle of battery slot - for better balance & ergonomics compared to previous model
• RAPIDSTOP™– stops all accessories in under the 2 seconds
• Universal reception to fit both, 6 and 8 mm accessories
• Delivering corded performance similar to a 1200 W grinder
• Removable dust screen to prevent debris entrance, prolonging motor life
• Slim handle design
• Spindle lock - increased productivity by reducing the need of 2 wrenches

• Ideal For Multiple Uses Indoors & Out
• Dries the surface in half the time
• Fast removal of water in one easy pass
• Will not scratch
• Moulds to almost any contour
• Soft silicone flexible blade
• Whisks away surplus water
• T shaped blade

• Fits MOGG 57
• To prevent sponge, chamois or cloth contamination of grit before using on vehicle bodywork
• Fits most standard 15L buckets
• 235 mm

• fits 235mm 15L buckets
• Plastic bucket barrier

• Highly Versatile 3 Piece Interior Detail Brush Set In Smart Presentation Pack
• Interior Brush Set

• 3 piece brush set

• Very mild chemical resistant
• Standard quality compression sprayer

• 1.5 Litre compression sprayer

• Comes with full spares support
• Great for cleaning windows, bathroom surfaces and fixtures, furniture and upholstery, vehicle windshields and windows
• Ideal for professionals such as cleaning companies and car washes but also perfect for use around the house
• Industry approved ‘Viton’ seals for water based h.d. chemicals in a trade environment

• White trigger head
• Resistant to general chemicals
• Canyon trigger and bottle

• plastic 600ml bottle
• White plastic trigger

Maypole’s flux cored Mig welding wire is suitable for these types of situations. Flux cored wire is not only an economical solution for those of you who only weld on the odd occasion, but it is also the perfect solution for outdoor welding as it will still work flawlessly even in light winds which is not possible when using gas. This spool comes with 0.4kg of flux cored steel wire and is 0.9mm thick.

Established in 1969, Birmingham based company Maypole has a long heritage in the manufacture and supply to customers in the automotive, trailer, leisure and agricultural markets. For over 40 years Maypole have been manufacturing and supplying its products to its ever growing network of customers and are proud to continue to add to their ever increasing portfolio of products.