Workshop Tools

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Double Locking Pin for Safety
• 10 Position Ratchet Bar
• Stop Tab for Security
• T-Type Welding for Added Durability
• Sold in Pairs
• Ratchet Type

• UKCA /CE

• One hand locking mechanism.
• Made from forged alloy steel for best durability – Cr Steel.
• Less hand fatigue when cutting thicker materials. Design with compound leverage action.
• Aviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.
• Ergonomic and durable overmoulded grips add comfort and last longer.
• Triple cutting direction identification – on the head, handle and by colour coded handle.
• Torsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.
• Thumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.
• Extra long aviation snips: For longer and straighter cuts in one go.
• Offset snips: For long continuous straight or curved cuts. 45° offset keeps users hand away from the cutting material.
• Chrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.
• Serrated cutting edges prevent slippage when cutting.
• Flush slimline design for non-snagging in material.

• Simple and easy to use, ideal for general low volume tyre inflation
• Has a durable alloy body and Euro style valve connector, and comes complete with operating instructions
• General purpose tyre inflator with an all Alloy body with a rubber protected gauge

• Reading Accuracy: 2 psi / 0.1 bar / 10 kPa Calibration: 10-210 psi / 0.7-15 bar Maximum Inlet Pressure: 15 bar Hose length: 0.85 m Tyre Valve Connection: Euro Clip-on Inlet Thread: G 1/4 l/min

• Gas cartridge sold separately
• For use with G2400 Go System propane gas cylinder
• Fitted with CGA600 connection
• Safety checked and test burned
• Ideal for plumbing, brazing and automotive
• Auto start Piezo ignition
• Swirl flame for more even heat distribution, wrapping around the target
• Instantly FLARESAFE; use at any angle
• A durable high power, high temperature (up to 1500 C) gas torch
• Ergonomic handle for maximum grip

• Conforms to BS:EN521

General Information

Brake Fluid Tester

• PLEASE NOTE - NOT SUITABLE FOR SILICONE BASED DOT 5 FLUID
• Suitable for DOT 3, DOT 4 & DOT 5.1
• Battery supplied
• Colour coded LEDs show level of water
• Quick and simple tool
• Essential safety check
• Identify percentage of water in brake fluid

• 0.5kg Reel
• Pack of 1
• Flux impregnated
• Material : 40% Tin/60% Lead

• Thumb and four finger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.
• Serrated cutting edges prevent slippage when cutting.
• Less hand fatigue when cutting thicker materials. Design with compound leverage action.
• Torsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.
• Chrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.
• Made from forged alloy steel for best durability – Cr Steel.
• One hand locking mechanism.
• Flush slimline design for non-snagging in material.
• Triple cutting direction identification – on the head, handle and by colour coded handle.
• Ergonomic and durable overmoulded grips add comfort and last longer.
• Aviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.

• Insulated
• Hardened
• CR-MO
• Combination, Long Nose, Diagonal, Cutting and Wire Stripping
• Comfort non-slip grip