Workshop Tools

• Signal Locking will show the correct direction to a short to ground
• Signal distance bar indicates distance height from short to ground or open circuits
• LED light on receiver illuminates the work space area
• Longer 10-minute Auto shut off time

• Operating Voltage (Transmitter): 6V-48V DC
• Current Consumption (Transmitter): <200mA
• Operating Voltage (Receiver): 2 AAA batteries
• Signal Frequency: 4kHz polarized signal
• Circuit Testing Modes: Open circuit tracking
• short circuit tracking
• ground circuit tracking
• Operating Temperature: Up to 50°C
• Storage Temperature: Up to 70°C
• Maximum Humidity: 80% non-condensing
• Altitude Limit: <2000m
• Signal Detection: Indicates short and open circuits using visual and audio cues
• Sensitivity Adjustment: Adjustable for varying signal strengths
• Auto Shutoff: Receiver turns off after 10 minutes of inactivity
• Accessories Compatibility: Standard 4mm banana jack connectors for custom adapters
• Cable Length: 6m transmitter power cable for extended reach.

• The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power, run time and durability
• Reversible belt hook
• Square friction ring
• Tri-LEDs deliver high definition lighting to increase workspace visibility
• Auto shut-off control applies no more than 34 Nm of torque for hand-tight fastening applications to prevent over tightening
• Bolt removal control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops
• 4-Mode DRIVE CONTROL allows the user to shift into four different speed and torque settings to maximise application versatility
• Incredibly compact design for this performance level, with only 124 mm overall length ideal for applications in tight spaces
• The most compact cordless impact wrench in its class, delivering the most access in tight spaces, with performance at 339 Nm of fastening torque

• Flexible battery system: works with all MILWAUKEE M12 batteries
• REDLITHIUM battery pack provides superior pack construction electronics and fade-free performance to deliver more run time and more work over pack life
• Rivets in one stroke with a 20.32 mm stroke length
• On board fuel gauge and LED light for added user convenience and illumination in low lit working conditions
• Tool-free access to easily clean jaws. On-board nose piece storage and removal tool for user convenience
• Integrated belt hook and lanyard tie off point
• Ergonomic design with 273 mm H x 66.8 mm W x 165 mm in length without mandrel collector
• Retention nose pieces hold rivets in any orientation
• Up to 325 x 4.8 mm stainless steel rivets on a single charge with a 2.0 Ah battery pack
• Supplied with 4 x retaining tips
• Suitable for all aluminium steel stainless steel and copper rivets up to 4.8 mm

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Deep wall construction provides clearance for protruding bolts.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Flexible battery system: works with all MILWAUKEE M12 batteries
• The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE's POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power, run time and durability
• LED lights up your work area for better visibility
• Tool-free belt change
• Dual action safety trigger with lock-on function for less strenuous on longer working periods
• 360 degree tool-free head adjustment allows the best handling for each working environment and provides compact storage
• One-hand design allows working in tight areas and ideal for overhead work
• Reverse mode allows the user to choose the belt orientation to manage the direction of sparks/ chips
• 2 speed modes and variable speed trigger provide maximum control from taking down welds to precise work with inox, aluminium and wood
• Outperforms pneumatic competitor while providing better balance
• Lightest cordless band file on the market, only 1.0kg with a 2.0 Ah battery

• Flexible battery system: works with all MILWAUKEE M12 batteries
• The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE's POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power, run time and durability
• The LED light illuminates the work area while the on-board fuel gauge displays remaining run time
• Premium rubber overmold withstands corrosive materials and provides increased comfort when in use
• Variable speed metal trigger provides ultimate control of the tool
• The industry leading FUEL technology combined with a reinforced mechanism and investment cast steel yoke housing provides greater durability for the professional user
• 19 mm low profile head design and extended neck allow users better access in tight spaces
• With up to 47 Nm of max torque and 450 rpm's, this tool delivers faster application speed and increased productivity for the professional user

• Large Circlip Plier - 1.8mm tip(Straight / 45 deg / 90 deg)
• Medium Circlip Piler - 1.2mm tip(Straight / 45 deg / 90 deg)
• Small Circlip Piler - 0.9mm tip(Straight / 45 deg), 1.2mm tip(90 deg)
• Slip-resistant grips with double-dipped handles
• All metal convertible dial for resistance against wear and prevents reduction in joint integrity
• Easier and quicker internal-external conversion with anti-slip grooved dial

• All Metal Dial

• All metal design for maximum durabilty.
• FOUR FLAT sides on socket deter rolling.
• 90 tooth design with 4Dg of arc swing for tight work spaces.
• 76 mm extension, 127 mm extension
• Deep well sockets: 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm
• Standard sockets: 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm, 21 mm, 22 mm, 23 mm, 24 mm

General Information

Pulley Holding Tool Set - VAG

• Complete set of adaptors including 4.8mm, 6mm, square 15mm x 6mm, square 15mm x 12mm, cup 13mm x 17mm , cup 16mm x 20mm, Spline M10, M12
• Equivalent to OEM tools T10172A (T10172) and T10554
• Designed to hold camshaft, crankshaft, oil pump and water pump pulleys and sprockets while loosening and tightening the fixing bolts

• Illuminated LCD display with a digital pressure and fuel gauge that displays remaining charge
• 4 bar memory presets​ and 3 units of measurement
• Top off up to 30 tyres on an M18 5.0 battery pack
• Automatic shut-off at selected bar prevents over inflation
• Auto pressure check feature activates to ensure bar target is achieved
• Supplied with a ball inflation needle presta chuck inflator nozzle and schrader chuck
• Auto shut-off technology inflates to users pre-selected pressure for highly accurate inflation
• 10.3 max bar capacity
• Compact lightweight design for fast inflation of car light truck and compact equipment tyres. Top off 235/65R16 sprinter tyres in under 1 minute
• Flexible battery system: works with all MILWAUKEE M18 batteries
• Anti-vibration stand with all rubber feet for no movement while inflating

• Flexible battery system: works with all MILWAUKEE M12 batteries
• The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE's POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power, run time and durability
• The LED light illuminates the work area while the on-board fuel gauge displays remaining run time
• Premium rubber overmold withstands corrosive materials and provides increased comfort when in use
• Variable speed metal trigger provides ultimate control of the tool
• The industry leading FUEL technology combined with a reinforced mechanism and investment cast steel yoke housing provides greater durability for the professional user
• 19 mm low profile head design and extended neck allow users better access in tight spaces
• With up to 47 Nm of max torque and 450 rpm's, this tool delivers faster application speed and increased productivity for the professional user

• 1x Gates Mounting Tools, timing belt (GAT5249)
• 1x Gates Mounting Tools, timing belt (GAT5256)
• 1x Gates Mounting Tools, timing belt (GAT5021)

• Flexible battery system: works with all MILWAUKEE® M18 batteries
• *on moderate to good paint, light scratches
• Line-lock-out function to prevent automatic start up after battery change
• 3 position bale handle for improved tool control
• Lock-on function provides more comfortable use when polishing for longer periods
• Rubber overmold gear case for increased comfort, especially when working with the tool vertically
• Removable dust screen to prevent debris ingress, prolonging motor life
• Maximum polishing accessory diameter of 180 mm
• Constant speed electronics with soft start for smooth start up
• Outstanding run time to polish one full size car per battery charge
• World´s first cordless polisher with 8 position variable speed selection ranging from 360 - 2200 rpm
• REDLITHIUM battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life
• REDLINK PLUS intelligence system delivers an advanced digital overload protection for tool and battery and uniquely enhances the tool performance under load
• Brushless POWERSTATE motor to deliver the ultimate mobility in car polishing

• Sets come in a durable foam.
• Chrome finish for corrosion and rust resistance.
• Ink-filled size labels for easy and quick size identification.
• Rounded I-beam handle for comfortably applying torque.
• Slim head dimensions for access in tight areas.