Workshop Tools

General Information

High Voltage Floor Matting - 1 Metre. High Voltage Floor Matting - 1 Metre

• Ribbed on the underside fabric impression on upper side
• Tested to IEC611111 Class 2 rated for working voltages up to 17kV
• Flame retardant oil and acid resistant insulated floor matting

• Dimensions: Width 1000mm, Thickness 3.00mm, Weight 4.0kgs per metre

• Personalized Blowcase
• Gauge with 0.01mm Increments
• Shock-Proof Gauge
• Transverse Arm for Fine Adjustment
• Identifies Vertical and Lateral Wobble
• 3-Point Clamp Stand for Safe Mounting onto Shock Absorber
• Measures Radial and Axial Offsets on Brake Discs

• Plastic Carry Case With Foam Inlay
• Includes Product Identification & Help Guide
• Fit & Remove TPMS Components With Ease
• Specialist TPMS Hand Tools Kit To Cover All Bases When Fitting & Removing Sensors
• Includes Low Limit Torque Wrench, TPMS Sealing Grommet Removal & Fitting Tool, Pre-Torqued Valve Core Tool, 11mm & 12mm Deep Sockets, Selection Of Torx Bits Presented In Plastic Case With Foam Inlay

• Radius corner on working end provides higher torque and better gripping of fastener
• Chamfered drive opening allows a quicker connection between socket and fastener
• Mirror polish chrome-plated finish prevents rust
• Knurled teeth on bottom of socket improve grip when handling
• Chrome Vanadium Alloy Steel

• Standard and extended handle lengths for easier access in tight spaces or extra leverage.
• Slim profile head with flush direction lever offers better accessibility.
• Versatile lockable flex head: Switch between 11 locking positions and freely moving head.
• 90 tooth design with 4 degreeof arc swing for tight work spaces.

• Flexible battery system: works with all MILWAUKEE® M18™ batteries
• Protected against splashing water at all angles (IP24)
• 2 adjustable metal hooks for hanging in vertical and horizontal position
• Pivoting 45° forward & backward head allows for 180° coverage
• TRUEVIEW™ high definition lighting
• Thanks to its compact design it operates in locations other lights cannot
• Three LED design with 2 light settings provides 300 lumens on High and 130 lumens on Low setting

• Designed for use with the part numbers 77099 and 77066 with the wheels on and the vehicle sitting on the ground
• Fully adjustable for wheels up to 18 inch diameter and designed to hang on the tyre giving hands free operation
• Can be used without the top bracket (held in place by hand) for vehicles with a low wheel arch
• Ideal for quick checking of camber, caster and KPI when used with Gunson 77099/77066

• FOUR FLAT sides on socket deter rolling.
• Wrench ready FOUR FLAT sides.
• Stamped sizes for easy visibility.
• Chrome finish for easy cleaning and corrosion protection.
• Available sizes: 12-24mm.
• Available sets: 13pc.

• Slim profile head with flush direction lever offers better accessibility.
• 90 tooth design with 4 °of arc swing for tight work spaces.

• Citroën: Relay/Jumper III (06-14), Relay/Jumper III (14-): Fiat: Ducato (06-12), Ford: Focus ('98), Mondeo (00), Ranger ('12), Tourneo Custom, Transit ('06), Transit ('14), Transit (00), Transit Custom Jaguar: X-Type (X400)(01-10), Land Rover: Defender, LDV: Convoy, LTI: TXII (02-06), Mazda: BT-50 (UP)(12-), Peugeot: Boxer III (06-14), Boxer III (14-)
• Equivalent to OE reference: 303-682, LDV177, 303-679A, LDV170, 3003-1587, 0198.N, 2.000.018.700, 0198.B2, 2.000.016.500, LDV167, 0198.J, 303-698, 303-675, 303-1562
• ABFA, D3FA, D5BA, D6BA, F3FA, FIFA, FMBA, FMBB, HJBA, HJBB, HJBC, HJBE, N7BA, N7BB, SDBA, CVF5, CVFF, CVR5, CVRA, CVRB, CYF5, CYFA, CYFB CYFC, CYFF, CYFG, CYR5, DRF5, DRFA, DRFB, DRFC, DRFF, DRFG, DRR5, DRRA, DRRB, GBVAJ(QW2R), GBVAJPF, GBVAJQW, MZ-CD, P8FA, P8FB, PGFA PGFB, QJBA, QJBB, QJBC, QJBD, QVFA, QWFA, SRFA, SRFB, SRFC, SRFD, SRFE, UHFA, UHFB, UHR5, USR6, USRA, USRB, UYR6, 4HG, 4HG (P22DTE), 4HH 4HH (P22DTE), 4HJ, 4HJ (P22DTE), 4HM, 4HM (P22DTE), 4HU, 4HU (P22DTE), 4HV, 4HV (P22DTE), BG, CRFF, CVF5, CVFF, CVR5, CVRA, CVRB, CYF5, CYFA, CYFB CYFC, CYFF, CYFG, CYR5, CYRA, CYRB, DRF5, DRFA, DRFB, DRFC, DRFG, DRR5, DRRA, DRRB, GBVAJ(QW2R), GBVAJPF, GBVAJQJ, GBVAJQJ (QJ2R), GBVAJQJ (QJ2S) GBVAJQJ (QJ2W), GBVAJQW, GBVAJQW (QW2S), GBVAJQW (QW2W), ID4/DT224, MZ-CD, P22DTE, P22DTE (4HG), P22DTE (4HH), P22DTE (4HJ), P22DTE (4HM) P22DTE (4HU), P22DTE (4HV), P8FA, P8FB, PGFA, PGFB, QJ2R, QJ2S, QJ2W, QJBA, QJBA (BG), QJBB, QJBC, QJBD, QVFA, QW2S, QW2W, QWFA, SRFA, SRFB, SRFC SRFD, SRFE, UHFA, UHFB, UHR5, USR6, USRA, USRB, UYR6, 244DT, D2FA, D2FB, D4FA, DOFA, F4FA, FXFA, H9FA, H9FB, H9FD, JXFA, JXFC, PD24P, PHFA, PHFC, ZSD 424 MZ-CD, SA2R, SA2S, SA2W, SAFA, SAFB
• C5279 contains the tools to enable the setting and locking of the engine to be undertaken during Timing Chain replacement and also the resetting of the position of the Crankshaft Sensor Carrier during Engine reassembly procedures.
• Citroën, Fiat, Ford, Jaguar, Land Rover, LDV, LTI, Mazda, Peugeot

• Can also be used on cooling systems hoses.
• Features a pressure gauge with shut off valve and pressure release valve.
• Kit supplied with 8 stepped adaptors to fit most hose sizes.
• Used in conjunction with an air line to show the presence of leaks
• sizes; 35 to 95mm

• Special tool steel
• Applicable to NCCJ500 and CTRNSJ500K
• Suitable for transmission jacks with mounting diameter of 30 mm
• Locking bracket for holding the strut securely
• Prevents the suspension strut from lowering when working on the axle
• Ideal for supporting the suspension strut
• Universal

• Over molded handle for more control and better grip.
• Steel reinforced handle for higher durability.
• Durable metal faces preventing chipping on contact.
• Precision balanced design and steel shot-filled head for optimised control.

• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.

• All-chrome shafts for increased durability.
• Comfortable Tri-Lobe handles for better grip.
• Hammer-ready strike cap improves leverage when working in tight and tricky spaces.
• All-metal core for improved durability.
• I-Beam design for added durability.
• Curved claw design reduces damage when pulling nails.

• 72-tooth ratchet allows the user to rotate with a smaller movement of the handle
• High torque accuracy allows for high degree of precision in working conditions
• Handle provides strong, durable and comfortable hand hold
• Two Way Click Design creates a a more versitle tool that can perform multiple functions
• 45 Teeth Round Head
• Durable Anodized Aluminum Handle
• Two Way Click Design (Clockwise / Counter Clockwise)

• 45 Teeth Round HeadTorque Accuracy CW: +/- 4% - CCW: +/- 6%
• 50 to 250Lbf.ft
• 67 to 338Nm

• 36 teeth ratcheting mechanism allows for finer adjustments and greater precision when tightening or loosening fasteners compared to wrenches with fewer teeth
• Torque range allows for a high degree accuracy and percision over full range
• Handle provides strong, durable and comfortable hand hold
• Allows for smooth actuation
• New Thrust Bearing System for smooth handle torque adjustments
• 45 teeth gear system
• Aggressive grip
• Recessed switch plate

• 45 teeth gear systemTorque range: 25 - 250 ft lbs
• 50 TO 250LBF.FT
• 67 TO 338Nm

• High quality hot-forging process provides a performance exceeding ASME standard
• Full popular range of metric sizes fits most circumstances
• High visibility colour filled size mark for easy identification during use
• Premium Chrome Finish
• 15 degree offset box end
• Anti-Slip and radius corners on open end

• ASME Compliant

• Can be used in situ no need to remove trailing link assembly from vehicle.
• Remove/install Fiesta IV rear axle mounting bushes.

• Textured nose maintains control when grabbing and twisting with serrated nose.
• Single-joint grip force for more control and better grip compared to double joint.
• Multi-function gripping zones for grabbing a wide variety of materials such as screws, cables and round parts.
• Deep-reach cross handles for increased reach in tight spaces for best access.

General Information

Diesel Injector Puller

• Saves time and money when injectors are difficult to remove
• Incorporating a slide hammer
• Presented in a handy blow mould case
• Diesel Injector Puller with M8/M12/M14 adaptors Assists removal of stubborn Bosch and Lucas diesel injectors

General Information

Diesel Engine Timing Tool - Fiat 2.3 JTD Diesel Engine Timing Tool - Fiat 2.3 JTD.

• The 23 JTD twin camshaft Common Rail diesel engine is belt driven between crankshaft and inlet camshaft but utilises a chain to connect both camshafts
• The high pressure fuel pump does not require timing
• This kit includes the latest Crankshaft Timing Pin required on engines produced from 2006-2008
• This kit includes the latest crankshaft timing pin
• An engine timing locking tool set for fiat ducato 23 JTD with engine codes: F1AE0481C, F1AE0481D, F1AE0481N 2002 to 2008 and the Fiat 30JTD with engine code F1CE0481D

• Includes AFG4 0-140 psi & 0-9.6 bar 0.53m Hose SCO Connector
• Accuracy Standards - Tested to over 400,000 cycles at 100% accuracy, meets EC 86/217 and compliant with EN12645:2015
• Piston & Seal Design - New design, less drag, reduced friction & less movement inertia means no internal corrosion, no sticking and no skewing of accuracy
• Valve Mechanism - Simplified 2 stage mechanism design prevents user having to in.pushin. against full line pressure on deflate preventing fatigue
• Biomorphic Shape - Ergonomic, easier to use and less prone to damage when dropped
• Lighter Weight - Gauge body weighs 923g, less work strain and easier for repetitive use
• AIRFORCE® MK4 Tyre Inflator is robust and highly accurate, offering leading inflation and deflation rates and high performance for both indoor and outdoor applications

• Accuracy: Meets EC 86/217 Compliant with EN12645:2014 Reading Accuracy: 0.1 bar / 2 psi Maximum Inlet Pressure: 13.8 bar / 200 psi Inflation Flow: 500 l/min / 18 cfm Operating temperature: -25 to 55 °C Hose Length: 0.53 m / 21 in Tyre Valve Connection: Single clip-on Calibration: 0-138 psi / 0-9.6 bar

• Protected against splashing water at all angles (IP24)
• 2 hooks for hanging
• High powered 2.1A USB charger charges tablets, smart phones, MP3 players and other electronic devices
• Best-in-class performance - outstanding light output 400+ lumens, designed to illuminate large areas
• TRUEVIEW™ high definition lighting
• Job site durability - rugged designed with impact resistant lens to withstand abusive job site conditions
• 180° - 360° adjustable beam - versatile design, allows the user to select between area lighting and task lighting
• Flexible battery system: works with all MILWAUKEE® M12™ batteries

• Lanyard hole for easy attachment to the Milwaukee safety range to allow use at heights.
• Gripping zone with integrated wire bender for flat and round material.
• Two component handle design for comfortable handling and ergonomic grip.
• Grey titanium surface finish is non reflective and ensures maximum corrosion resistance.
• Induction hardened cutting edges to cut even the hardest of materials.
• Integrated ring spanner to tighten or untighten metric bolts (M8 to M10).
• Precision machined joint for maximum power transmission with optimum leverage for easy and effortless work.

• Flexible battery system: works with all MILWAUKEE M12 batteries
• Bright LED light for increased visibility of soldering application
• Temperature monitoring to maintain heat throughout tough applications
• Dual colour LED lights to notify user: flashing green when tool is heating up solid green when the tool is ready for operation and solid red when the tool is off but the tip is hot to touch until the red LED turns off
• Tool free replaceable tips
• 3 locking head positions to work in multiple orientations 0° 45° 90°
• Quick heat up time: the tool is ready to use in 20 30 seconds

• Accuracy Standards - Tested to over 400,000 cycles at 100% accuracy, meets EC 86/217 and compliant with EN12645:2014
• Piston & Seal Design - reduced friction & less movement inertia means no internal corrosion, no sticking and no skewing of accuracy
• Valve Mechanism - Simplified 2 stage mechanism design prevents user having to in.pushin. against full line pressure on deflate preventing fatigue
• Biomorphic Shape - Ergonomic, easier to use and less prone to damage when dropped
• Lighter Weight - Gauge body weighs 923g, less work strain and easier for repetitive use
• AIRFORCE® MK4 Tyre Inflator is robust and highly accurate, offering leading inflation and deflation rates and high performance for both indoor and outdoor applications

• Accuracy: Meets EC 86/217 Compliant with EN12645:2014 Reading Accuracy: 0.1 bar / 2 psi Maximum Inlet Pressure: 13.8 bar / 200 psi Inflation Flow: 500 l/min / 18 cfm Operating temperature: -25 to 55 °C Hose Length: 0.53 m / 21 in Tyre Valve Connection: Twin hold-on Calibration: 0-138 psi / 0-9.6 bar

• Anti-roll, 3 sided collar on the handle
• Wrench ready shank allows extra leverage to be applied
• Comfortable Tri-Lobe handle optimized for maximum user comfort and high torque applications
• Hardened magnetic tips for maximum durability and fastener retention

• Anti-roll, 3 sided collar on the handle
• Wrench ready shank allows extra leverage to be applied
• Comfortable Tri-Lobe handle optimized for maximum user comfort and high torque applications
• Hardened magnetic tips for maximum durability and fastener retention

• The 90 tooth count gear allows 4 degree arc swing.
• This design provides an incredibly precise turning radius for work in tight spaces.
• Full polish chrome finish on each wrench resists corrosion while maintaining the look and feel of a new product.
• Features a non-slip ratchet end and non-slip open end.

• Carlyle Metric Stubby Ratcheting Wrench Set (12 Pieces)

• FOUR FLAT sides on socket deter rolling.
• Wrench ready FOUR FLAT sides.
• Stamped sizes for easy visibility.
• Chrome finish for easy cleaning and corrosion protection.
• Stored on a socket rail for better tool organization.

• Type M: Cone for angled edges and narrow contours.
• Type H: Flame for contouring.
• Type D: Ball for milling holes and creating concave cuts.
• Type C: Cylindrical ball nose for top and side cutting.
• Includes: Types B ,C ,D, H, M.
• Suitable for unhardened and hardened steel, cast iron and non ferrous metals (aluminium, brass, copper).
• Double cut toothing geometry ensures excellent material removal, low vibrations for easier handling and smaller swarfs.
• According to DIN 8033.

• Ultra light robust housing from special plastic
• Includes 1/4in. coupling connector
• Cold insulated handle
• No additional lubricant necessary
• Air pressure is regulated through a button
• Expanding of the joint arms through pneumatic air
• For CV joint boots diameter from 20 120 mm
• Suitable for all universal and original vehicle CV joint boots
• Air exhaust through the handle rear end

• Part of the PACKOUT™ modular storage system.
• IP 65 rated weather seal to keep out rain and jobsite debris.
• Enough storage capacity to fit power tools like circular saws, grinders, drill drivers.
• 34 kg weight capacity.
• Constructed with impact resistant polymers for jobsite durability.
• Quick-Adjust Dividers allow users to store and organize larger equipment and accessories, such as fittings, connectors or caulk.

General Information

Timing Tool Kit - 1.3 JTD/HDi Fiat, GM, Suzuki, Ford, PSA

• Application: 1.3 JTD/HDi Diesel engines found in Fiat, GM, Suzuki, Ford, Citroen Nemo and Peugeot Bipper
• Timing tool kit with Camshaft/Crankshaft alignment tools only
• Made in Sheffield
• Full Engine rebuild kit available part number 4773
• Use 6408 (Camshaft Holding Tool) if removing camshaft drive gears

• Professional quality
• Twin hold on connector
• PSI/BAR (1 BAR = 100kPa)
• Rubber boot protection for gauge
• Easy to read gauge

• 3/8 in drive torquew wrench
• High torque accuracy allows for high degree of precision in working conditions
• Handle provides strong, durable and comfortable hand hold
• Allows for percise tightning in a single direction
• 45 Teeth Flex Head
• Comfort Grip Handle
• One Way Click Design (Clockwise)

• 45 Teeth Flex HeadTorque Accuracy CW: +/- 3%
• 20 TO 100LBF.FT
• 27 TO 135Nm

• This set of tools enables the correct timing to be made when servicing the Vauxhall/Opel chain engines fitted to Vauxhall Agila and Corsa with 1.0 12v X10XE and 1.2 16v X12XE engines
• Agila, Astra-G/H, Combo-C, Corsa-B/C/D, Meriva-A, Tigra-B
• For 1.0 12v X10XE and 1.2 16v X12XE engines
• With X10XE, Z10XE, Z10 XEP, X12XE, Z12XE, Z12 XEP, Z14XEL, Z14XEA engine codes
• Chain driven engines
• 1993-2010

• 3 in 1 combination HSS-G drill bit: drilling, threading and deburring in one single operation.
• Suitable for use with battery powered or corded drills.
• Reception: ¼″ hex, E6.3.
• Impact rated : suitable for use with cordless impact drivers when keeping to recommended drilling speed.
• Thread type: metric ISO-thread DIN 13.
• Suitable for drilling in plastics, sheet steel and non-alloyed material up to 800 N/mm².
• Always use a suitable cutting oil.

• 180 degree rotating flexible heads allow you to apply leverage at any desired angle and get around obstructions in tight areas.
• Premium chrome vanadium steel provides durable life
• Heat treated for maximum strength
• 72 tooth ratchet
• Dual 180 degree swivel ratchet head design
• Mirror Polish Finish

• ASME Compliant

• Slim profile head with flush direction lever offers better accessibility.
• FOUR FLAT™ sides on socket deter rolling.
• All metal design for maximum durabilty.
• Sockets are stamped with measurements on the flat side for easy-to-read visibility.
• Comes with a removable inner tray perfectly designed to be stored.
• 90 tooth design with 4 °of arc swing for tight work spaces.