Workshop Tools

• M18™ REDLITHIUM™ 2.0 Ah / 4.0 Ah / 5.0 Ah / 6.0 Ah / 9.0 Ah battery packs recharge in 40 min / 80 min / 100 min / 124 min/ 180 min or less
• Recharges all M18™ and M12™ REDLITHIUM™ battery packs
• Recharges in sequence - first in, first to charge - resulting in less time needed to manage charging cycles
• M12™ REDLITHIUM™ 2.0 Ah / 3.0 Ah / 4.0 Ah / 6.0 Ah battery packs recharge in 40 min / 70 min / 80 min / 90 min or less
• Charges MILWAUKEE® batteries on the go, perfect for tradesmen and other professional that can use the down time to re-charge their batteries using conventional 12V sockets

• Accepts higher feed pressure and torque equalling less breakages.
• Impact resistant ABS case with added rubber corner protection.
• Polished finish reduces friction and extends drill bit life.
• 135° Split point - Precision starting, drill bit won't walk on material surface.
• Flute geometry - THUNDERWEB flute form ejects hot chips rapidly. Dissipates heat better increasing life time.
• Parabolic web cross section: Large web thickness. Strength built in.
• THUNDERWEB design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the THUNDERWEB core is thicker than that of

• Features a non-slip ratchet end and non-slip open end
• 8 - 19 mm
• 90 Tooth Count
• Non- Slip Ends
• 6 Point
• 12 Piece
• Full Polish Chrome

• The 90 tooth count gear allows 4 degree arc swing

• Supplied with polishing pad, sanding pad, polishing sponge white, polishing sponge yellow, lambswool, side handle
• Flexible battery system: works with all MILWAUKEE M12 batteries
• REDLITHIUM battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life
• Individual battery cell monitoring optimises tool run time and ensures long term pack durability
• Detachable 2 position side handle
• Spindle lock allows fast, tool free accessory change
• Compact design with only 130 mm allows access to hard areas
• Long run time allows frequent task completion with one battery charge
• Large capacity of 76 mm polishing sponge and 50 mm sanding pad size for fast job completion
• REDLINK overload protection electronics in tool and battery pack deliver best in class system durability
• Variable 2 speed selection (0-2800 / 0-8300 RPM) for both polishing and sanding applications

• SHOCKWAVE™ IMPACT DUTY Screwdriver bits
• Comfortable Tri-Lobe screwdriver handle optimised for maximum user comfort and high torque applications.
• Sockets are stamped with measurements on the flat side for easy-to-read visibility.
• FOUR FLAT™ sides on socket deter rolling.
• 90 tooth design with 4 °of arc swing for tight work spaces.

General Information

Engine Timing Tool Kit - Alfa Romeo/Fiat Multiair. Engine Timing Tool Kit - Alfa Romeo/Fiat Multiair

• Fiat Punto Evo/Punto/ Bravo 2009-2013 with engine codes 198A7.000/955A6.000, Lancia Delta 2010-2013 with engine code 955A7.000
• Applications: Alfa Romeo Mito/Giulietta Multiair105/Multiair Turbo135/163/170 from 2009-2013 with engine code/955A6.000/955A2.000/955A7.000/955A8.000/940A2.000
• Supplied in metal storage case with instructions and application list

• For use on Lambda sensors (oxygen sensors) on most modern cars This tool covers a wide variety of options and fits most heated and non-heated sensors
• Sizes: 1/2in.D: 29mm x 90mm long, 27mm x 85mm long, 22mm x 50mm long, 3/8in.D: 11/16in. x 74mm long, 22mm (7/8in.) x 80mm long, 22mm (7/8in.) x 90mm long, 22mm (7/8in.) x 30mm long
• Suitable for most modern cars including: Audi, BMW, Citroën, Ford, Mercedes-Benz, Peugeot, Renault, Skoda, Vauxhall, Volkswagen
• Manufactured from Chrome Molybdenum

General Information

Diesel Injector Remover - VAG TDi

• No solenoid removal required
• Use in accordance with OEM instructions
• Equivalent to: OEM T10402, T10415
• Engines: 1.6L TDi CR diesel & 2.0L TDi
• Applications: Volkswagen Golf 2009, Seat Ibiza 2008, Altea 2009, Leon 2009, Altea XL 2009, Altea Freetrack 2009, Toledo 2013 and Audi A3 2009/2013
• Diesel injector remover for VAG vehicles fitted with 1.6 & 2.0 CR TDi engines

• 3 crimping cavities to crimp multiple size connectors with one tool. Red (0.3 - 1.0mm² ), blue (1.5 - 2.5mm²) and yellow (4.0 - 6.0mm²).
• Dual-ratcheting action provides a full, complete crimp that ensures secure connections.
• High-contrast color-coded markings provides better visibility.
• Quick-release lever for increased productivity.
• Ergonomic handle designed with comfort grips that will not peel.

• Reduced vibration and minimzed rebound
• Durable grip handle with an anti-slip design
• Precision balanced design for optimized control

• Low battery indicator, light flashes when battery pack is low on charge
• IP54 rating, the light is protected from dust and splashing water
• Integrated magnets, clamping mechanism, and key hole for screws / nails provide multiple mounting options for different surfaces
• Highly durable and impact resistant polycarbonate lens to withstand drops up to 2.7 metres
• Most compact flood light designed for the on-the-go needs of service and maintenance trades
• Five high performance LEDs provide 1000 lumens of light output replacing 250 W halogen lights
• TRUEVIEW™ high definition lighting
• Flexible battery system: works with all MILWAUKEE® M12™ batteries

• 45° rubber overmold stand for aiming beam upward during prolonged use when the light is equipped with a compact battery pack
• Ergonomic grip with rubber overmold - enhances user comfort and grip during use
• Hand wrist lanyard to keep the light safe and handy
• Battery fuel gauge displays battery status
• Dual function trigger allows momentary or lock-on use
• Metal housing and impact resistant polycarbonate lens with gasketed rubber cap which protects from moisture for harsh jobsite conditions
• Especially useful for long range identification - utility pole/high voltage cable inspection, inspection of long runs of conduit, cast or copper pipe, under ground work, bridge work
• Flexible battery system: works with all MILWAUKEE® M12™ batteries
• The reflector produces narrow centre beam with wide peripheral beam
• Up to 35% longer beam distance than competition - 650 m intense and highly focused beam of light with 750 lumens
• TRUEVIEW™ high definition lighting
• Up to 8 hours of run time with an M12™ REDLITHIUM™ 4.0 Ah battery pack

• Flexible battery system: works with all MILWAUKEE M18 batteries
• REDLITHIUM battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life
• On board fuel gauge and LED light
• Individual battery cell monitoring optimises tool run time and ensures long term pack durability
• 1/2 square drive for use with universal sockets
• Heavy duty full metal gearbox and gears for superior durability and maximum torque
• REDLINK overload protection electronics in tool and battery pack deliver best in class system durability
• High performance 4-pole motor delivers maximum power whilst maximising the power to weight ratio
• Compact 1/2 impact wrench measures 155 mm in length making it ideal for working within confined spaces

• Working pressure 4 to 8 bar
• One model that covers all vehicle models
• Reduces fitting time to approximately 20 minutes
• The boot remains fully expanded until the release is pressed
• The piston design allows the boot to be expanded and then disconnected from the airline – no need to drag it round the garage
• Suitable for use with the full range of NAPA CV boots as well as other branded ‘stretchy’ boots
• Manufactured using a high quality resin based plastic giving it a robust but lightweight design – ideal for everyday garage life
• Pneumatic tool that utilises existing airline systems in garages
• BS EN ISO 4414:2010 Pneumatic fluid power
• BS EN ISO 12100:2010 Safety of machinery
• The Machinery Directive 2006/42/EC
• Features a patented built in safety mechanism and is fully CE Certified
• Supplied ready assembled

• Rounded tips to grab hoses without damaging these.
• Single-joint grip force for more control and better grip compared to double joint.
• Multi-function gripping zones for grabbing a wide variety of materials such as screws, cables and round parts.
• Deep-reach cross handles for increased reach in tight spaces for best access.

• Kit Contenst: 4932492500, 4932492501, 4932492502

General Information

Timing Tools - VAG 3cyl 6/12 valve. Timing Tools - VAG 3cyl 6/12 valve

• 6v/12v 12v tools are OEM T10123 x2 and T10121x1 with AZQ/BME Engine codes and 6v require T10120x1 and T1021x1 for AWY/BMD engine codes
• 2 and 3 cylinder
• Timing tools for Volkswagen Lupo and Polo 1.2 litre engines

• 8 - 19 mm
• 15 Degree angled bend
• The 90 tooth count gear allows 4 degree arc swing
• Non- Slip Ends
• 6 Point
• 12 Piece
• Full Polish Chrome

• Features a non-slip ratchet end and non-slip open end

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening
• Phosphate Outer Finish
• Phosphate Outer Finish

• Chrome Molybdenum Alloy Steel

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• 32 teeth ratcheting mechanism allows for finer adjustments and greater precision when tightening or loosening fasteners compared to wrenches with fewer teeth
• High torque accuracy allows for high degree of precision in working conditions
• Handle provides strong, durable and comfortable hand hold
• Allows for percise tightning in a single direction
• 45 Teeth Fixed Head 
• Comfort Grip Handle
• One Way Click Design (Clockwise)

• 45 Teeth Fixed Head Torque Accuracy CW: +/- 3%
• 30 TO 150lBF.FT
• 40 TO 203Nm

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• FOUR FLAT sides on socket deter rolling.
• Wrench ready FOUR FLAT sides.
• Stamped sizes for easy visibility.
• Chrome finish for easy cleaning and corrosion protection.
• Available sizes: 12-24mm.
• Available sets: 13pc.

• Part of the PACKOUT™ modular storage system
• Constructed with impact resistant polymers for jobsite durability.
• Integrated bottle opener.
• Double premium insulation keeps contents cold for up to 30 hours.
• 15 l capacity.
• Removable tray for separate storage of personal items to keep them elevated above icy water.
• IP 65 Food Grade Leak-Proof Liner prevents leakages and protects contents from debris and dust.

• Compact design with integrated carry handle to maximise portability
• Three hours run time on speed three with a M18™ REDLITHIUM™ 4.0 Ah battery pack
• Three speed settings for optimised air flow up to 1290 meters per hour
• Flexible battery system: works with all MILWAUKEE® M18™ batteries
• AC adaptor supplied
• Fixing points gives the user the option to wall mount the fan if needed
• Efficient air circulation circulates the air within a 3.6 m x 4 m room
• Adjustable head allows the user to utilise the fan in various heights and positions over a range of 120°
• AC/DC, allows the user to run on M18™ REDLITHIUM™ or AC power when available
• Rubber feet provide stability and no surface scratches