Proud to be a UK-based company
Contact usWorkshop Tools
Categories
Brand:
Select Brand
invoice Page 2 of 37
Results 51 - 100 of 1816
Part number: S38TS45H
Important compatibility info
| Title | Socket - Tamper Proof 5 Star Plus - 3/8in. Dr - TS45H |
Additional Information
Precision designed long star tips ensure accurate fastener fit
- precision designed bit tip
- mirror polish chrome plated CR-V socket resist rust
- S2 BIT material for strength and durability
- Zinc phosphate bit finish for strength and durability
ONLY
£4.37
£4.37
Part number: CIS38E14
Important compatibility info
ONLY
£4.42
£4.42
Part number: PWN175
Important compatibility info
| Title | Car Dust Caps With Key - Chrome Metal - Pack Of 4 |
Additional Information
Dust caps are an essential tool to not only prevent your tyres from losing pressure, but also to prevent dirt and grime from entering the valve. Over time they can get damaged, lost or even stolen which can be an annoyance. This is where Wott-Nots range of dust caps can be the solution to your problem. This pack of Wot-Nots Chrome Car Dust Caps with key are used to stop dirt entering the schrader valve on tyres. These dust caps are supplied in chrome metal and can be used on cycles, cars, caravans and a variety of other applications. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Easy grip
- Standard thread
- These caps are used to stop dirt entering the schrader valve on tyres
ONLY
£4.44
£4.44
Part number: SD38014M
Important compatibility info
| Title | Socket - Deep - Metric Standard - 3/8in. Dr - 14 mm |
Additional Information
Radius cornered 6-point socket design reduces bolt / nut wear, and improves socket grip. Full polish chrome finish provides rust resistance
ONLY
£4.48
£4.48
Part number: S38TS50H
Important compatibility info
| Title | Socket - Tamper Proof 5 Star Plus - 3/8in. Dr - TS50H |
Additional Information
Precision designed long star tips ensure accurate fastener fit
- precision designed bit tip
- mirror polish chrome plated CR-V socket resist rust
- S2 BIT material for strength and durability
- Zinc phosphate bit finish for strength and durability
ONLY
£4.50
£4.50
Part number: PWN172
Important compatibility info
| Title | Tyre Valve Cores - Short 43mm - Pack Of 4 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. This pack of 4 Wot-Nots tyre valve cores are normal length 43mm valves. They can be used on some cycles but are more suited to cars, vans and motorcycles. This is an ideal replacement for an old core that might be causing slow punctures or has a broken nozzle. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Can be used on some cycles
- Normal length 43mm valves
- Tyre valve cores
ONLY
£4.50
£4.50
Part number: SD38012M
Important compatibility info
| Title | Socket - Deep - Metric Standard - 3/8in. Dr - 12 mm |
Additional Information
Radius cornered 6-point socket design reduces bolt / nut wear, and improves socket grip. Full polish chrome finish provides rust resistance
ONLY
£4.53
£4.53
Part number: S38TS55H
Important compatibility info
| Title | Socket - Tamper Proof 5 Star Plus - 3/8in. Dr - TS55H |
Additional Information
Precision designed long star tips ensure accurate fastener fit
- precision designed bit tip
- mirror polish chrome plated CR-V socket resist rust
- S2 BIT material for strength and durability
- Zinc phosphate bit finish for strength and durability
ONLY
£4.55
£4.55
Part number: S14T10
Important compatibility info
| Title | Star Bit - T10 - 1/4in. Drive Socket |
Additional Information
S2 bit material for strength and durability
- Mirror polish chrome plated CR-V socket resist rust
- S2 Bit Material for strength and durability
ONLY
£4.58
£4.58
Part number: S14T8
Important compatibility info
| Title | Star Bit - T8 - 1/4in. Drive Socket |
Additional Information
S2 bit material for strength and durability
- Mirror polish chrome plated CR-V socket resist rust
- S2 Bit Material for strength and durability
ONLY
£4.58
£4.58
Part number: S14T8H
Important compatibility info
| Title | Tampe Star Bit - T8H - 1/4in. Drive Socket |
Additional Information
S2 bit material for strength and durability
- mirror polish chrome plated CR-V socket resist rust
- S2 BIT material for strength and durability
ONLY
£4.58
£4.58
Part number: CS14008M
Important compatibility info
Additional Information
1/4in Drive 8mm 6 PT Chrome Socket
- Radius corner on working end provides higher torque and better gripping of fastener
- Chamfered drive opening allows a quicker connection between socket and fastener
- Mirror polish chrome-plated finish prevents rust
- Knurled teeth on bottom of socket improve grip when handling
- Radius Corner Design
- Chamfered Drive Opening
- Chamfered Drive Opening
ONLY
£4.59
£4.59
Part number: S14007M
Important compatibility info
| Title | Socket - Shallow - Metric Standard - 1/4in. Dr - 7 mm |
Additional Information
Radius cornered 6-point socket design reduces bolt / nut wear, and improves socket grip
- Deep rolled stamped markings provide easy identification
- Meets or exceeds all ANSI/ASME standards
- Standard non-impact socket
- Full polish chrome finish provides rust resistance
- Deep rolled stamped vertical knurling make the right tool easy to identify
ONLY
£4.59
£4.59
Part number: S14T10H
Important compatibility info
| Title | Tampe Star Bit - T10H - 1/4in. Drive Socket |
Additional Information
S2 bit material for strength and durability
- mirror polish chrome plated CR-V socket resist rust
- S2 BIT material for strength and durability
ONLY
£4.59
£4.59
Part number: S14T27H
Important compatibility info
| Title | Tampe Star Bit - T27H - 1/4in. Drive Socket |
Additional Information
S2 bit material for strength and durability
- mirror polish chrome plated CR-V socket resist rust
- S2 BIT material for strength and durability
ONLY
£4.59
£4.59
Part number: S14T7H
Important compatibility info
Additional Information
1/4DR T7H TAMPER TORX
- mirror polish chrome plated CR-V socket resist rust
- S2 BIT material for strength and durability
ONLY
£4.59
£4.59
Part number: S14TS10H
Important compatibility info
Additional Information
1/4DR TS10H 5 STAR TAMPER PROOF
- precision designed bit tip
- mirror polish chrome plated CR-V socket resist rust
- S2 BIT material for strength and durability
ONLY
£4.59
£4.59
Part number: S14TS15H
Important compatibility info
Additional Information
1/4DR TS15H 5 STAR TAMPER PROOF
- precision designed bit tip
- mirror polish chrome plated CR-V socket resist rust
- S2 BIT material for strength and durability
ONLY
£4.59
£4.59
Part number: S14TS20H
Important compatibility info
Additional Information
1/4DR TS20H 5 STAR TAMPER PROOF
- precision designed bit tip
- mirror polish chrome plated CR-V socket resist rust
- S2 BIT material for strength and durability
ONLY
£4.59
£4.59
Part number: S14TS8H
Important compatibility info
Additional Information
1/4DR TS8H 5 STAR TAMPER PROOF
- precision designed bit tip
- mirror polish chrome plated CR-V socket resist rust
- S2 BIT material for strength and durability
ONLY
£4.59
£4.59
Part number: S14E7
Important compatibility info
| Title | External Star - E7 - 1/4in. Drive Socket |
Additional Information
S2 bit material for strength and durability
- Non-Impact
- Polished Chrome
ONLY
£4.61
£4.61
Part number: S14TS25H
Important compatibility info
Additional Information
1/4DR TS25H 5 STAR TAMPER PROOF
- precision designed bit tip
- mirror polish chrome plated CR-V socket resist rust
- S2 BIT material for strength and durability
ONLY
£4.61
£4.61
Part number: S14TS27H
Important compatibility info
Additional Information
1/4DR TS27H 5 STAR TAMPER PROOF
- precision designed bit tip
- mirror polish chrome plated CR-V socket resist rust
- S2 BIT material for strength and durability
ONLY
£4.61
£4.61
Part number: S14015M
Important compatibility info
| Title | Socket - Shallow - Metric Standard - 1/4in. Dr - 15 mm |
Additional Information
Radius cornered 6-point socket design reduces bolt / nut wear, and improves socket grip
- Deep rolled stamped markings provide easy identification
- Meets or exceeds all ANSI/ASME standards
- Standard non-impact socket
- Full polish chrome finish provides rust resistance
- Deep rolled stamped vertical knurling make the right tool easy to identify
ONLY
£4.65
£4.65
Part number: CSD38108M
Important compatibility info
Additional Information
3/8in Drive 8mm 12 PT Chrome Deep Socket
- Radius corner on working end provides higher torque and better gripping of fastener
- Chamfered drive opening allows a quicker connection between socket and fastener
- Mirror polish chrome-plated finish prevents rust
- Knurled teeth on bottom of socket improve grip when handling
- Radius Corner Design
- Chamfered Drive Opening
- Chamfered Drive Opening
ONLY
£4.66
£4.66
Part number: 4932451484
Important compatibility info
| Title | Cut.W Pro+ SCS41 115x1mm-1pc |
Additional Information
Cut.W Pro+ SCS41 115x1mm-1pc
- *Orders are only possible in master carton (with 50 x 4932430445). Minimum order quantity is 50 x 4932430445 (=1 master carton). Order quantities greater than 50 pcs are to be ordered in multiples of 50 pcs (ie. 100 150 200...).
- Applications: Iron and sulphur free top line thin cut-off wheels for all steels. Best suitable for stainless (except the 350 x 4 mm) and acid-resistant steel hardox heat-resistant cast steel spring steel mild and tool steel.
- Characteristics: 50% less cutting time and 50% less dust than standard 3 mm thick discs. Lower material loss.
ONLY
£4.66
£4.66
Part number: S14006M
Important compatibility info
| Title | Socket - Shallow - Metric Standard - 1/4in. Dr - 6 mm |
Additional Information
- Deep rolled stamped markings provide easy identification
- Meets or exceeds all ANSI/ASME standards
- Standard non-impact socket
- Full polish chrome finish provides rust resistance
- Deep rolled stamped vertical knurling make the right tool easy to identify
ONLY
£4.74
£4.74
Part number: SD38016M
Important compatibility info
| Title | Socket - Deep - Metric Standard - 3/8in. Dr - 16 mm |
Additional Information
Radius cornered 6-point socket design reduces bolt / nut wear, and improves socket grip. Full polish chrome finish provides rust resistance
ONLY
£4.74
£4.74
Part number: S38009M
Important compatibility info
| Title | Socket - Shallow - Metric Standard - 3/8in. Dr - 9 mm |
Additional Information
- Chrome Vanadium
- Deep
- 3/8in. Drive
- 6 Point
ONLY
£4.75
£4.75
Part number: 4932451499
Important compatibility info
| Title | Stone Cut.W Pro+ CC42 115x3mm-1pc |
Additional Information
Stone Cut.W Pro+ CC42 115x3mm-1pc
- Applications: for concrete masonry products and thin natural stone tiles.
ONLY
£4.75
£4.75
Part number: ACA2746S
Important compatibility info
| Title | Standard Adaptor Socket - Female Thread |
Additional Information
- Female Thread Rp 1/4
- Case hardened for longer life
- Used with Airflow, Vertex, Twin, non-corrodible and Safeflow Safety couplings
- Wide choice of thread and hose tail sizes
- Used in most workshop/garage environments
ONLY
£4.75
£4.75
Part number: ACA2593S
Important compatibility info
| Title | Standard Male Adaptor -Thread R 1/4 |
Additional Information
- Case hardened for longer life
- Used with Airflow, Vertex, Twin, non-corrodible and Safeflow Safety couplings
- Wide choice of thread and hose tail sizes
- Used in most workshop/garage environments
- Nominal Bore 4.8 mm
- Thread Type Male
- Thread Size R 1/4
ONLY
£4.75
£4.75
Part number: S38006M
Important compatibility info
| Title | Socket - Shallow - Metric Standard - 3/8in. Dr - 6 mm |
Additional Information
- Chrome Vanadium
- Deep
- 3/8in. Drive
- 6 Point
ONLY
£4.77
£4.77
Part number: IBP13
Important compatibility info
| Title | Impact Phillips Bit - #1 - 3in. Long |
Additional Information
They feature a torsion area that absorbs torque peaks which reduce stress prolonging bit life
- Phillips Drive
- Designed for impact use
ONLY
£4.81
£4.81
Part number: IBP33
Important compatibility info
| Title | Impact Phillips Bit - #3 - 3in. Long |
Additional Information
They feature a torsion area that absorbs torque peaks which reduce stress prolonging bit life
- Phillips Drive
- Designed for impact use
ONLY
£4.81
£4.81
Part number: S38016M
Important compatibility info
| Title | Socket - Shallow - Metric Standard - 3/8in. Dr - 16 mm |
Additional Information
Radius cornered 6-point socket design reduces bolt / nut wear, and improves socket grip. Full polish chrome finish provides rust resistance.
- Chrome Vanadium
- Deep
- 3/8in. Drive
- 6 Point
ONLY
£4.81
£4.81
Part number: CWFP106M
Important compatibility info
| Title | Combination Spanner - Metric Spanner - 6 mm |
Additional Information
Mirror polish chrome plated finish resists rust, radius cornered offset chamfered box end provides precise fastener control, Spanner features 6-Point, 15 degree angled open end for greater access
- 15 degree angled open end for greater access
- Radius cornered offset chamfered box end provides precise fastener control
- 12 Point
- Mirror polished Chrome plated finish
ONLY
£4.83
£4.83
Part number: S38019M
Important compatibility info
| Title | Socket - Shallow - Metric Standard - 3/8in. Dr - 19 mm |
Additional Information
Radius cornered 6-point socket design reduces bolt / nut wear, and improves socket grip. Full polish chrome finish provides rust resistance.
- Chrome Vanadium
- Deep
- 3/8in. Drive
- 6 Point
ONLY
£4.86
£4.86
Part number: CADOW10M
Important compatibility info
| Title | 10mm Double Open End Angle Wrench |
Additional Information
- provides better maneuverability, allows users to position the wrench more comfortably and apply torque with greater ease
- Allows for greater access in tight areas
- Helps protect the wrench from rust and corrosion, ensuring longevity
- Clear and easy to read engraving to ensure use of proper size
- Meets or exceeds ANSI Standards for strength
- 30 and 60 degree head angles
- Polished Chrome Finish
- Double One Size Openings
- Size etched on side
- Polished Chrome Finish
ONLY
£4.87
£4.87
Part number: S38020M
Important compatibility info
| Title | Socket - Shallow - Metric Standard - 3/8in. Dr - 20 mm |
Additional Information
- Chrome Vanadium
- Deep
- 3/8in. Drive
- 6 Point
ONLY
£4.87
£4.87
Part number: SD12011M
Important compatibility info
| Title | Socket - Deep - Metric Standard - 1/2in. Dr - 11 mm |
ONLY
£4.89
£4.89
Part number: SD12012M
Important compatibility info
| Title | Socket - Deep - Metric Standard - 1/2in. Dr - 12 mm |
ONLY
£4.89
£4.89
Part number: 48223170
Important compatibility info
| Title | INKZALL marker |
Additional Information
INKZALL marker
- Acrylic nib ideal for rough surfaces such as OSB and concrete.
- Lanyard hole e.g. to attach the INKZALL highlighters to the belt.
- Easy open cap for one hand operation.
- Marker continues to write after 72+ hours of cap off time.
- Quick dry time – reduced smearing markings on PVC metal surfaces.
- Can be used on wet oily dusty rusty with debris surfaces.
- Helmet clip – can be clipped to the construction site cap trousers overalls.
- Thin body for use in restricted areas.
- For use on concrete wood metal plywood OSB plastic.
- Stays sharp doesn't mushroom or push back under pressure.
ONLY
£4.89
£4.89
Part number: SW3212A
Important compatibility info
| Title | Tyre Pressure Gauge - Analogue - Chrome |
Additional Information
It is important to to ensure your vehicles tyres always have the optimal amount of pressure in them. Make measuring this quick and easy with Streetwizes Chrome Metal Tyre Gauge. Super lightweight and portable, it could be stored in your glove box or boot with ease. It has an angled head fitting and shock proof metal body, with a capacity of 10-50psi. Supplied by Streetwize Accessories, the UK's leading supplier of automotive and leisure accessories. We have over 40 years experience in supplying handy accessories for your car, van, motorhome, caravan and home!
- Tough & shock proof metal body
- Spring pocket clip
- Capacity 10-50 psi
- Angled head fitting
- CE, ROHS, REACH, GS TUV Compliant
ONLY
£4.92
£4.92
Part number: S14TS30H
Important compatibility info
Additional Information
1/4DR TS30H 5 STAR TAMPER PROOF
- precision designed bit tip
- mirror polish chrome plated CR-V socket resist rust
- S2 BIT material for strength and durability
ONLY
£4.94
£4.94
Part number: S12015M
Important compatibility info
| Title | Socket - Shallow - Metric Standard - 1/2in. Dr - 15 mm |
Additional Information
Radius cornered 6-point socket design reduces bolt/nut wear and improves socket grip
- Full polish chrome finish provides rust resistance
- Non-Impact
- 1/2 in. Drive
- 6 Points
ONLY
£4.95
£4.95
Part number: S38022M
Important compatibility info
| Title | Socket - Shallow - Metric Standard - 3/8in. Dr - 22 mm |
Additional Information
- Chrome Vanadium
- Deep
- 3/8in. Drive
- 6 Point
ONLY
£4.96
£4.96
Part number: SH1210M
Important compatibility info
| Title | Socket - Hex Metric Standard - 1/2in. Dr - 10 mm |
Additional Information
Precision designed hex tips ensure accurate fastener fit
- Mirror polish chrome plated CR-V socket resist rust
- S2 Bit Material for strength and durability
ONLY
£4.98
£4.98
Part number: S12E18
Important compatibility info
| Title | Socket - External Star Standard - 1/2in. Dr - E18 |
Additional Information
Made of chrome vanadium alloy steel for strength and long life
- Non-Impact
- Polished Chrome
ONLY
£4.99
£4.99
Part number: SH3804M
Important compatibility info
Additional Information
3/8DR 4MM HEX BIT SOCKET
- mirror polish chrome plated CR-V socket resist rust
- S2 BIT material for strength and durability
ONLY
£4.99
£4.99
Page 2 of 37
Workshop Tools
