Workshop Tools

• Red and Yellow color symbolize the international color for safety
• Insulated, dual layered TPR handles
• Hardened, CR-MO jaws for added strength and durability

• Product Dimensions (L x W x H): 24 x 15 x 8.5cm
• Max Pressure (PSI): 100psi
• Features an analogue display pressure gauge that provides readings in both PSI and Bar
• Suitable for inflating tyres on cars, motorcycles & bicycles and it has a trigger lock valve adaptor. It also comes supplied with two nozzle adaptors for inflating footballs, cushions and other inflatables
• It also has a wide base that provides better stability when the foot pump is in use as well as a anti-slip tread plate. Plus, the pump has a retaining clip that runs the whole width of the foot pedal which makes it more secure when storing the foot pump
• Comes with a reinforced base at the bottom of both cylinders which enables the rods to smoothly glide into barrels. This helps to reduce strain on the cylinder end caps on both barrels
• This deluxe 100PSI double barrel foot pump is designed to provide you with a long lasting performance

• Conforms to EN16051:2012

General Information

Drain Plug Wrench 8mm x 10mm Square

• For use on Peugeot, Renault and Volvo
• Ideal for use on back axle, gearbox
• Manufactured from forged and selected steel
• Suitable for Peugeot, Renault, Volvo

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Wrench can be used in extremely tight situations where other wrenches would fail
• 25% wider jaws providing the ability to work on larger fasteners
• 60% thicker ergonomic handle design
• laser-etched size indexing
• Features a patented low-rattle design

• CR-V alloy steel for long lasting durability.
• Worldwide patent.
• Meet DIN torque spec.
• Processing without tolerance to true present the 90 teeth 4 degrees of operation function.
• Nickel chrome plated for long lasting protection.
• Extra long beam offers extreme reach and loads of leverage.
• 6-point box ends snugly fix hex-shaped fastener heads and resist slipping off while you work

• Part of PACKOUT™ Shop Storage.
• Fully customise your shop according to your needs.
• Most secure and easy mounting with click & lock mechanism.
• Easy and fast access to all batteries.
• Clip in batteries for secure storage.

• Proprietary steel and heat treat process for maximum strength and durability.
• Heavy duty construction for fastening capabilities in all impacts.

• Diesel only
• Refill fluid hose
• Can be used for multiple refills

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Push button quick release
• Made of high-strength alloy steel with chrome-plated finish
• Ratchets have slim profile for use in tight spots
• Quick release button
• Polished Chrome grip ratchet

Maypole’s flux cored Mig welding wire is suitable for these types of situations. Flux cored wire is not only an economical solution for those of you who only weld on the odd occasion, but it is also the perfect solution for outdoor welding as it will still work flawlessly even in light winds which isn’t possible when using gas. This spool comes with 0.4kg of flux cored steel wire and is 0.8mm thick.

Established in 1969, Birmingham based company Maypole has a long heritage in the manufacture and supply to customers in the automotive, trailer, leisure and agricultural markets. For over 40 years Maypole have been manufacturing and supplying its products to its ever growing network of customers and are proud to continue to add to their ever increasing portfolio of products.

• Velcro backing pad for a fast and easy polishing sponge change within seconds
• Fits with both MILWAUKEE® M18 FUEL™ Random Orbital Polishers - M18 FROP15 & M18 FROP21

• Includes Tips: @0-Degree: 0.95 & 1.2mm, 1.2 & 1.8mm @45-Degree: 1.2mm @90-Degree: 1.2mm
• External: 6 - 20mm
• Internal: 8 - 24mm
• Heavy-Duty Return Spring
• Convert from Working with External to Internal Snap Rings

• Holes in rail are on top and on the bottom for easy mounting.
• Usable with impact and chrome sockets.
• Metal ball detent clip for superior socket retention.
• Compatible with standard and deep sockets removable end caps for easy clip removal.
• Flexible interchangeable rails and clips for customisation of ¼? ¾? and ½? drive sockets.

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Features a non-slip ratchet end and non-slip open end
• Corrosion Resistant
• Polished Chrome
• 90 Tooth Count
• 6 Point

• The 90 tooth count gear allows 4 degree arc swing

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Long panel wrenches provide additional reach and leverage on stubborn fasteners and feature an aggressive non-slip design.
• Each wrench is constructed from chrome vanadium high alloy steel and is produced using a precision hot forging process with extra emphasis on special heat treatment to provide maximum strength and durability.
• Wrenches are technician's first choice for getting the job done and come backed by unwavering commitment to detail and uncompromising quality from top to bottom of each product. Long panel wrenches feature an aggressive non-slip design.
• Mirror polish chrome-plated finish resists rust while 12-point, 15 Degree offset box ends provide precise fastener control. Non-slip jaw designs allows for higher torque and turning power in tough applications. Includes storage rack.

• Carlyle Metric 12 Point Long Non-Slip Combination Wrench - 10 mm

General Information

Deep Socket - Air Impact 1/2"D 27mm;, Deep Socket - Air Impact 1/2"D 27mm.;

• Manufactured from Chrome Vanadium
• 6pt (single Hex)
• Range: 10mm - 32mm
• Deep socket for use with air impact tools

• Ergonomic handle for leverage
• Soft grip inner band to avoid damage
• Ideal for restricted access
• Capable of gripping 73mm < 105mm diameter
• Swivel and cranked head means this filter wrench can grab hold of objects in awkward situations

• Simple and effective.
• One way function only.
• Connect to any length of hose.
• Ideal for cars and boats etc.
• Suitable for priming fluids on diesel engines.
• This pump can be used to prime most diesel fuel pumps including diesel boat engines. Pump from Laser Tools Part No. 3463.

General Information

Camshaft Locking Pins - for Ducati 3V

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Chrome finish for corrosion and rust protection.
• Laser engraved size ID for quick and easy identification.
• Precision knurling located on the shaft and female drive end for better control when hand threading.

• Features a non-slip ratchet end and non-slip open end
• Corrosion Resistant
• Polished Chrome
• 90 Tooth Count
• 6 Point

• The 90 tooth count gear allows 4 degree arc swing

General Information

Star Bit T40

• Impact quality
• Manufactured from Chrome Molybdenum
• One piece bit manufactured for extra strength
• 80mm Long x T40
• 1/2in. Drive
• This bit is manufactured in one piece for extra strength
• A common size of bit that is often used when the fixing has been sealed with compound sealant

General Information

Pry Bar 300mm. Pry Bar 300mm

• Soft ergonomic grip handle
• Go thru strength
• Blade manufactured from Chrome Vanadium

• Blade width: 15mm
• Length: 300mm

• Suitable for higher torque fastening applications, fits directly onto 1/2in. impact tools.
• One-piece design TX bit and socket with 1/2in. internal square drive reception according to DIN 3121 / ISO 1174-2.

• Suitable for higher torque fastening applications, fits directly onto 1/2in. impact tools.
• One-piece design HEX bit and socket with 1/2in. internal square drive reception according to DIN 3121 / ISO 1174-2.

• Part of PACKOUT™ Shop Storage.
• Can be also attached to metal surfaces due to magnetic back.
• Fits in PACKOUT™ Slim Organiser (4932471064) & PACKOUT™ Compact Slim Organiser (4932471065).
• Hangs on PACKOUT™ Wall Mounting Plates.
• Stores bit holders, bits, sockets, screws, nails and other small metal items.

• Includes Blow Mold Case
• 3/4 x 13/16, 7/8 x 15/16 in., 19 x 21 mm, 3 in. Extension
• Radius corner design for better gripping of fastener & chamfered openings for faster socket fit over fastener
• Black Phosphate

General Information

Socket Rails 1/4" 3/8" 1/2" 3pc. Socket Rails 1/4" 3/8" 1/2" 3pc

• Rail size: 1/2in., 3/8in. & 1/4in. drive
• 14 socket spaces per rail
• 3 piece socket rail set

• Holes in rail are on top and on the bottom for easy mounting.
• Usable with impact and chrome sockets.
• Metal ball detent clip for superior socket retention.
• Compatible with standard and deep sockets removable end caps for easy clip removal.
• Flexible interchangeable rails and clips for customisation of ¼? ¾? and ½? drive sockets.

General Information

Engine Timing Tool Kit - Vauxhall/Opel;, Engine Timing Tool Kit - Vauxhall/Opel.;

• Zafira-B 1.6 16v with engines Z16LET & Z16XEP 2003-2007
• Meriva (VXR)
• Astra-H
• Astra-G
• Opel
• Vauxhall
• Camshaft alignment pin (KM 6340) and tensioner locking pin (KM 6333) for:

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Maypole’s flux cored Mig welding wire is suitable for these types of situations. Flux cored wire is not only an economical solution for those of you who only weld on the odd occasion, but it is also the perfect solution for outdoor welding as it will still work flawlessly even in light winds which is not possible when using gas. This spool comes with 0.4kg of flux cored steel wire and is 0.9mm thick.

Established in 1969, Birmingham based company Maypole has a long heritage in the manufacture and supply to customers in the automotive, trailer, leisure and agricultural markets. For over 40 years Maypole have been manufacturing and supplying its products to its ever growing network of customers and are proud to continue to add to their ever increasing portfolio of products.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• NCCJ500-W - Wheel Replacement
• NCCJ500-S - Saddle Replacement
• NCCJ500-P - Hydraulic Pump Replacement
• NCCJ500-FP - Foot Pedal Replacement

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

General Information

Hose Clamp Tool (Bar Type) Hose Clamp Tool (Bar Type).

• Ensures complete clamp
• No sharp edges
• Steel construction with chrome plated
• Suitable for brake and fuel hoses

• Special profile
• Consumable
• Bag of 100
• For use with the Power-TEC hot stapler
• Stainless steel staples

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

General Information

Oil Filter Socket 3/8"D - 32mm

• 3/8in.D
• Suitable for Vauxhall/Opel Astra-G, Corsa-B and Zafira
• Manufactured from Chrome Vanadium
• 32mm Face Drive Socket suitable for use on oil filters on Vauxhall/Opel including AstraG CorsaB and Zafira

• 180 position mechanism provides 2 degree swing arc for tight access areas
• 1.5 times ASME standard torque provides strength for the professional user
• Patented anti-slip open end provides secure grip on new and worn fasteners
• 180 Positon Ratcheting Mechanism
• Anti-Slip and radius corners on open end
• Mirror Polish Finish

• ASME Compliant

• Designed to reduce the risk of damaging the motorcycle wheel rims when fitting or removing tyres
• Set of two
• Soft material will not damage the rims
• String line attachment for easy removal

• Socket set features mirror polish Chrome-Plated finish for rust resistance
• Radius cornered 6-Point Socket design offers better fastener control
• Shallow Metric Socket Set

• Size: 3.6 x 2.7m (12 x 9ft)
• Twin colour is reversible between silver and green and weighs 80 grams per square metre
• Highly durable, tear, stretch and UV resistant, with rust resistant metal eyelets
• Heat sealed, poly rope reinforced hem
• Tough re-usable waterproof cover with a laminate woven polyethylene construction