Workshop Tools

General Information

Engine Timing Tool Kit - for Ford Duratorq Diesel

• 2.4 Tdi Transit (00-08)
• Plus 2.0 TDCi Tdi Transit (00-08)
• Also 2.0 TDCi Mondeo chain engine, 2.2 TDCi Mondeo (04-07)
• For 1.4 TDCi Fiesta and Fusion 2002-2009)
• A special 4 piece kit containing the necessary special pins for 2.0 and 2.4 litre chain driven engines
• Allows removal and replacement of timing belts/chains on the Ford Duratorq engines

General Information

Timing Pins - Renault engines. Timing Pins - Renault engines

• OEM codes MOT 1489/1054/1430, Mercedes 607 589 01 15 00, 607 589 00 15 00
• For Flywheel locking on Mercedes Benz Citan use Laser 3203 (starter motor removal required)
• Renault engine code K9K (2002-on), Mercedes 607951 (K9K) (2012 on)
• Popular with the Nissan Micra 15 Dci
• Crankshaft and Camshaft timing pin set for Renault 15 and 19 DCi engines fitted to Laguna, Kangoo and Clio models

General Information

Diesel Injector Puller

• Saves time and money when injectors are difficult to remove
• Incorporating a slide hammer
• Presented in a handy blow mould case
• Diesel Injector Puller with M8/M12/M14 adaptors Assists removal of stubborn Bosch and Lucas diesel injectors

General Information

Timing Tools - VAG 3cyl 6/12 valve. Timing Tools - VAG 3cyl 6/12 valve

• 6v/12v 12v tools are OEM T10123 x2 and T10121x1 with AZQ/BME Engine codes and 6v require T10120x1 and T1021x1 for AWY/BMD engine codes
• 2 and 3 cylinder
• Timing tools for Volkswagen Lupo and Polo 1.2 litre engines

General Information

Locking Tool Set - Diesel Engines. Locking Tool Set - Diesel Engines

• Ford TDDi, TDCi in 18 Fiesta Turbo, Focus, Transit
• For setting the timing chain see Part No 4173
• Includes locking strap, flywheel locking tool, TDC setting screw and camshaft sprocket puller
• Supplied in storage case

General Information

Engine Timing Tool Kit - Ford 1.4/1.5/1.6 TDCi, PSA 1.4/1.6. Engine Timing Tool Kit - Ford 1.4/1.5/1.6 TDCi, PSA 1.4/1.6

• Crankshaft locking tool
• Crankshaft alignment tool
• Camshaft alignment tool
• This engine timing tool kit is suitable for Ford Focus 1.4 | 1.6 TDCi chain engines with codes G8DA | G8DB | HNDA 2004-2006.The kit includes:

• Cup type oil filter wrench 86 mm x 9 Flutes suitable for:
• Alfa Romeo (petrol/diesel)
• Volkswagen
• Fiat
• Seat
• Renault
• Mercedes

General Information

Timing Tools - Land Rover/Jaguar V6. Timing Tools - Land Rover/Jaguar V6

• Camshaft sprocket timing pins 303-1126
• Camshaft Sprocket aligning tool 303-1132
• Flywheel Locking Tools - OEM 303-1117 (Automatic Transmission) 303-1116 (Manual Transmission)
• Engine Code 276D T 2004-2007
• Timing pins for Land Rover Discovery 2.7 TDV6, Range Rover Sport 2.7 TDV6 and Jaguar S Type TDVi with V6 engines with automatic and manual transmissions

General Information

Engine Timing Tool Kit - Vauxhall/Opel;, Engine Timing Tool Kit - Vauxhall/Opel.;

• Zafira-B 1.6 16v with engines Z16LET & Z16XEP 2003-2007
• Meriva (VXR)
• Astra-H
• Astra-G
• Opel
• Vauxhall
• Camshaft alignment pin (KM 6340) and tensioner locking pin (KM 6333) for:

General Information

Tensioner Wrench - VAG Tensioner Wrench - VAG.

• Multi purpose tensioner
• Five adjustable positions for use on many Volkswagen Audi Group models
• The tool is designed to offer further access where access is restricted
• 4mm Hex Key required to adjust the positioning
• 18mm pin centres/3mm pins

• Set of Castors for 4508A

• Combination Spanner made from Chrome Vanadium
• Part of the Jumbo range of spanners
• A 560mm long combination spanner

• 3/4in. drive
• 29mm
• Impact quality
• Manufactured from Molybdenum

General Information

Deep Impact Socket 3/4"D 30mm

• Part of a range of Deep Impact Sockets in 3/4in. drive
• Deep Impact socket
• Available in range 19mm - 46mm
• Manufactured from Chrome Molybdenum

General Information

Deep Impact Socket 3/4"D 41mm

• Part of a range of Deep Impact Sockets in 3/4in. drive
• Deep Impact socket
• Available in range 19mm - 46mm
• Manufactured from Chrome Molybdenum

• Part of a range of Deep Impact Sockets in 1in. drive
• Deep Impact socket
• Available in range 22mm - 70mm
• Manufactured from Chrome Molybdenum

General Information

Aluminium Repair System Aluminium Repair System.

• Can be used with standard heat source
• Complete with tinning brush & 5 aluminium rods
• This product will repair any damage to aluminium parts quickly and effectively without using flux or chemicals
• Using a standard heat source these aluminium brazing rods can repair damage to most aluminium parts without using flux or chemicals Brazes all Aluminium Alloys, including Zinc, Magnesium, Pot Metal and Cast Aluminium

General Information

Injector Dismantling Tool - for Bosch

• Tamperproof
• 10mm Hex
• Made in Sheffield
• Suitable for removing the internal part of Bosch Injectors

General Information

Timing Tool Kit - fits Renault 1.6/2.0/2.3 DCI/ Nissan Timing Tool Kit - fits Renault 1.6/2.0/2.3 DCI/ Nissan.

• OEM Codes: EN48334, EN48332, EN48331, EN48330 Made in Sheffield
• Supplied in metal storage case
• Two crankshaft locking pins are now included to cover for the 16 DCi (Comp G) and 20, 23 DCi (Comp F) Component G - Crankshaft Locking Pin has been added for later M9T 20 and R9M 16 DCi engines
• Timing tool kit for Renault 20DCI chain drive diesel engines fitted to the Megane/ Vel Satis/Espace/Scenic/Trafic/Laguna/Koleos also fitted to the Nissan Qashqai and the Vauxhall/Opel Vivaro Packed in a metal case for storage Application list and OEM

General Information

Timing Tool Set - Fiat 1.2/1.4 8v. Timing Tool Set - Fiat 1.2/1.4 8v

• Foam insert ensures the tools are replaced after timing
• Full application list and instructions supplied
• Also Ford KA
• Petrol engine timing tool set specifically designed for Fiat 1.2 & 1.4 8v engines in Fiat 500 / Idea / Linea / Punto / Doblo / Panda

General Information

Dual Connection Adaptor - for Bosch

• To be used with Laser slide Hammer (Part No 4811) or with any slide hammer with a 5/8 UNF thread
• Allows the connection to both the internal M17 internal thread and the M27 external thread
• Allows the stress of the injector pulling to be spread over as much of the injector body as possible

General Information

Timing Tool Kit - Fiat/Alfa Romeo/Saab/GM JTD. Timing Tool Kit - Fiat/Alfa Romeo/Saab/GM JTD

• 14 Buffing mops
• Supplied in metal case with EVA foam
• Essential tool
• Made in Sheffield
• Fits a wide range of models
• For use on Fiat | Alfa JTD multijet diesel engines 1.6 | 1.9 | 2.4 SOHC | DOHC

General Information

Engine Timing Tool Kit - BMW.;,,**,/ Engine Timing Tool Kit - BMW;,..*,*.

• Made in Sheffield
• Essential tool kit
• Pump Pulley Removal Tool included. Manufactured from selected steel
• Applications include BMW 2.0 N47 | N47S (2007-2010)

General Information

Timing Tool Kit - Land-Rover/Ford/PSA/Jaguar. Timing Tool Kit - Land-Rover/Ford/PSA/Jaguar

• Peugeot Boxer and 807 2.2 Hdi 05 onwards
• OEM cross reference and instructions included
• Applications Ford S-Max/Galaxy 2.0 and 2.2 TDCi 2006 onwards and Rover Freelander II TD4 2.2 Duratorq TDCi 06 onwards
• Specific kit supplied for Ford, Land Rover, PSA and Volvo 2.0, 2.2 DOHC common rail diesel engines

General Information

Motorcycle Tyre Lever 380mm

• Specially designed angle of blade for use on motorcycles
• Made from Chrome Molybdenum for strength
• Fitted with an aluminium handle
• Essential tool
• Also for use on quad tyres etc.

• Part of the Laser Truck range
• Black phosphate finish, heavy duty construction
• 65mm
• OEM 03.364.20.03.0
• For 6 to 9 tonne conventional and Eco axles (type H/K/N)

• For 6 to 9 tonne conventional and Eco axles (type H/K/N)
• OEM 03.364.20.03.0
• 65mm
• Black phosphate finish, heavy duty construction
• Part of the Laser Truck range

• Professional quality
• Twin hold on connector
• PSI/BAR (1 BAR = 100kPa)
• Rubber boot protection for gauge
• Easy to read gauge

General Information

Extra Long Insulated Hex Key Set 6pc

• Universal use
• Ideal for use on electric and hybrid vehicles
• Packed in a durable storage case
• Sizes 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm
• VDE Hex key set tested to 1000V
• Metric sized Hex keys with VDE protection

• Packed in a plastic storage
• Ideal for use on electric and hybrid vehicles
• Sizes: T10, T15, T20, T25, T27, T30, T40, T45, T50
• VDE 1000V tested and certificated
• Manufactured from S2 steel for strength

General Information

Engine Timing Tool Kit - GM engines.;, Engine Timing Tool Kit - GM engines;,..

• Instructions included
• Also fits Chevrolet Cruze, Orlando 1.4, 1.6, 1.8 and Fiat Croma, Alfa Romeo 159 with 939A4.000 engines
• Applications: Astra-G, Corsa-D, Insignia, Mervia, Signum, Vectra-C & Zafira-B 2003-2011
• Engine timing tool kit for GM engines fitted to Vauxhall/Opel and other vehicles 16v 1.6 and 1.8