Workshop Tools

• They are used as a general-purpose soft-faced hammer in automotive and general engineering for assembly, repair and maintenance
• These copper hammers have faces that are designed to wear and can be easily replaced as spare faces are available
• Ideal where a heavy blow is required combined with a relatively small striking area
• The malleable Iron head provides the weight for the blow and the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage
• Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft

• Weight: 850g

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Position Locking Pin
• in.Rin. Pin Prevents Locking Pin Slipping Out
• Flat Top Rubber Saddle for Smooth Engagement
• Triangular Base for Added Stability
• Sold in Pairs
• Folding Type

• UKCA /CE

• 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19 mm
• Deep Metric Socket Set
• 12 Points
• Socket set features mirror polish Chrome-Plated finish for rust resistance

• 180 degree rotating flexible heads allow you to apply leverage at any desired angle and get around obstructions in tight areas.
• Premium chrome vanadium steel provides durable life
• Heat treated for maximum strength
• 72 tooth ratchet
• Dual 180 degree swivel ratchet head design
• Mirror Polish Finish

• ASME Compliant

• SHOCKWAVE™ IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Dual hole design and groove for security accessories.
• Best fitting thanks to 6 gripping points.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Key handle allows compressor to be tightened
• Time saver
• Allows piston and ring assembly to slide into the bore minimizing damage
• For installing piston and ring assembly into the bore
• For pistons 53mm to 125mm

• Qty: 2
• 1/8in. Gas BSP Male
• Flexible rubber
• Swivel ends

• 300mm (12in.)

General Information

Oil Filter Pliers 50mm-114mm

• Serrated jaws for additional grip on oily surfaces
• Soft grip handles
• Black treated Steel
• Handles filter diameter of 50mm - 114mm
• Long handled oil filter pliers

• Stainless steel needle and nozzle
• Pressure trigger and air control screw
• Cup Capacity: 600ml
• Air Consumption: 7 CFM
• Air pressure: 3BAR / 50PSI
• Gravity fed spray gun

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• 15° offset box for better accessibility.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.

• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Pack 2 Pces
• For use with conventional & pneumatic grease gun hosing
• Slide-on / Knuckle Joint Type
• Swivel Connector

General Information

Budd Wheel Nut Socket 21mm Sq. Budd Wheel Nut Socket 21mm Sq

• Suitable for front and rear axle wheels on many imported trucks including Isuzu, Mitsubishi Fuso and Hino
• Impact quality manufactured from Chrome Molybdenum with black phosphate finish
• Extra deep design allows removal of stud and nut
• Length 90mm x 3/4in.D
• Budd wheel nut socket 21mm square (4pt)

• SHOCKWAVE™ IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Dual hole design and groove for security accessories.
• Best fitting thanks to 6 gripping points.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.

• The pulley shaft is held in place with the T50 Star bit on 1/2in.D socket whilst the nut is undone using the 33 teeth union nut with 19mm spanner
• Star is the equivalent of Torx - 6 sided Torx is the registered trademark of Acument Intellectual Properties, LLC
• Ideal tool for assembling and dismantling the free wheel pulley whilst charging the alternator or pulley on Bosch alternators

• Size: 5.4 x 3.6m (18 x 12ft)
• Twin colour is reversible between silver and green and weighs 80 grams per square metre
• Highly durable, tear, stretch and UV resistant, with rust resistant metal eyelets
• Heat sealed, poly rope reinforced hem
• Tough re-usable waterproof cover with a laminate woven polyethylene construction

• Fast to fit and remove
• Suitable for flywheels with or without pilot bearing
• For single plate clutches

• Chrome alloy steel, chrome plated.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Durable double stacked pawls for longer ratchet life.
• 144 Ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.

• Part of PACKOUT™ Shop Storage.
• Fully customise your shop according to your needs.
• Most secure and easy mounting with click & lock mechanism.
• Easy and fast access to all tools.
• Stores wrenches, screwdrivers, keys and more.
• High strength steel hooks for storing even heavy tools and items.

• Qty: 50
• Straight Profile
• Imperial Threads

General Information

Brake Caliper Cleaning File Double Sided

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

The Maypole Double Barrel Foot Pump is just one of the options from their range of portable foot pumps. It has superior performance up to 100psi, comes with an analogue readout which measures in both PSI and BAR and all the connectors and adapters that you will need to inflate not only your tyres but also a wide range of other inflatables including sports equipment, balls and toys. The pump is quick and easy to use, is compact for easy storage and comes with an ergonomic rubberised tread plate.

Maypole are the UK's leading manufacturer of high quality towing, trailer and related leisure products. Based in Birmingham with over 40 years of experience, they are a trusted and well-known brand for their products. With over 2000 lines currently, Maypole is using their knowledge and expertise in making new and innovative products and solutions which are helping their customers. From electrical cabling, to electrical winches, and even ice scrappers, Maypole has tried to cater for the Travel and leisure markets in the UK.

• 60cm Hose with adapters
• Superior performance to 100psi
• Ergonomic rubber coated tread plate
• Due to its size, the foot pump is easy to store and very easy to use
• Ideal for the quick and easy inflation of a variety of products including car tyres, bicycle tyres, motorcycle tyres, sports balls, air beds, etc.
• Double barrel, heavy duty footpump