Workshop Tools

General Information

Fuel Injection Pump Sprocket Locking Tool - for Ford Transit

• Maintains engine timing and timing chain position while permitting removal of the fuel pump
• Use with Ford OEM tools 303-679 (found in Laser 6191) and 303-249 (found in Laser 5825)
• Equivalent to OEM 303-1317
• Engine found in: Ford Transit and Ford Ranger
• Applications: 2.2 & 3.2 TDCi Duratorq engines from 2006 onwards

• Pump available separately - Part No. 3813
• Specialist tool
• 10mm diameter connection.
• For the introduction of fuel into the fuel pump after replacement of the fuel filter.
• Suitable for Vauxhall 2.2 Di and 2.0 Di diesel engines with engine codes: X20DTL,X20DTH,X22DTH.
• For introducing fuel into the fuel pump after replacement of the fuel filter.

• Instructions included
• Suitable for all non-toxic fluids and safe and easy to use
• Also suitable for household plumbing systems etc
• Quick and effective for water and other liquids Not suitable for petrol
• 175mm overall length Pipes are 900mm long
• An ideal tool for transferring fluid from one vehicle to another

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

General Information

CV Boot Tool. CV Boot Tool

• Time saver
• Steel centre
• Allows fitting of the CV boot without disassembly
• Assists with installing a new CV Boot

• Chrome finish for corrosion and rust protection.
• Durable and compact storage rack to optimize space inside the drawer.
• Laser engraved size ID for quick and easy identification.
• Precision knurling located on the shaft and female drive end for better control when hand threading.

• Mirror polished Chrome plated finish
• Hex Bit Metric Socket Set
• Precision designed hex tips ensure accurate fastener fit
• Includes color coded rail for convenient storage and identification
• 6, 8, 10, 12 - 15 mm, 17 - 19 mm

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

General Information

Fork Ball Joint Separator - Large. Fork Ball Joint Separator - Large

• Medium size (25mm internal jaw width) available Part No 5496A
• Essential service tool
• Correctly hardened and tempered
• Selected steel
• Fork ball joint separator - Large (35mm internal jaw width)

General Information

Barrel Pump: Barrel Pump.

• Flexi hose for extracting
• Deep fixed tube for accurate filling (900mm long)
• Syphon any non-corrosive fluid using pump action

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Stores paper towels, tapes.
• Part of PACKOUT™ Shop Storage.
• Fully customise your shop according to your needs.
• Most secure and easy mounting with click & lock mechanism.

• 180 degree rotating flexible heads allow you to apply leverage at any desired angle and get around obstructions in tight areas.
• Premium chrome vanadium steel provides durable life
• Heat treated for maximum strength
• 72 tooth ratchet
• Dual 180 degree swivel ratchet head design
• Mirror Polish Finish

• ASME Compliant

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Qty: 2
• 1/8in. Gas BSP Male
• Flexible rubber
• Swivel ends

• 450mm (18in.)

• Reaches hard-to-reach locations with 180 degree pivoting drive end.
• Loosen tight nuts & bolts.
• Features mirror polish chrome-plated finish for rust resistance.

• Breaker Bar / Socket Carlyle Hand Tools

• Laser engraved sizing on the bits for easier identification
• Double-sided bits in the 27 in 1 ratchet multi-bit screwdriver for widest range of applications
• Power-tool ready bit holder with a 1/4in. reception
• Removable bit holder for access in tighter spaces
• Easily visible when a bit is missing
• In-handle bit storage for quick and easy bit access

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• SG2 A18 ER70S-6
• Mild steel welding wire for welding low and medium tensile steels

• Qty: 3
• 1/8in. Gas BSP
• High Pressure Rubber
• Popular Line
• Flexi Hose

• Single pack
• 15ft working length
• Recoil air hose

• QUAD EDGE Tip: unique combination of 135dgsplit point and four cutting edges: 135dgsplit point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
• Suitable for drilling high alloy content steels and metals with tensile strengths over 1000 N/mm² like stainless steel.
• Metal drill bits ground from solid extremely heat resistant 5% cobalt-alloyed high speed steel produced according to DIN 338.
• 3-flat shank from 5 mm for better grip and prevents chuck slippage.
• Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
• Colour: bronze.
• Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.

• Rounded I-Beam handle for comfortable handling grip.
• 180° pivoting head for greater access to tight spaces.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Chrome alloy steel, chrome plated.
• Durable double stacked pawls for longer ratchet life.
• 144 ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.
• Ink-filled labels for better visibility.

• Gas regulator
• For use with WLD00129 and WLD00130
• Mini mig gas regulator for use with disposable gas cylinders

• Complete with socket rail
• Sizes: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm
• Socket manufactured from Chrome Vanadium, Bit from Silicon Steel

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Rounded I-Beam handle for comfortable handling grip.
• 180° pivoting head for greater access to tight spaces.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Chrome alloy steel, chrome plated.
• Durable double stacked pawls for longer ratchet life.
• 144 ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.
• Ink-filled labels for better visibility.