Workshop Tools

General Information

Spline Bit 1/2"D M10

• A special bit designed for use on axle shaft removal on Audi and Volkswagen vehicles
• M10 x 800mm - 1/2in. Drive
• Special bit designed for use on axle shaft removal
• Socket manufactured from Chrome Vanadium, bit from Silicon Steel

• Easy to follow instructions
• Can be used successfully on the following systems: Tandem master cylinders without sensors Tandem reservoirs, Slave servos, Vacuum Servos
• Using air pressure from a spare wheel it will effortlessly bleed hydraulic systems
• This system sets the standard for affordable brake and clutch bleeding systems

• Ball end for up to 30° access to screw.
• 0
• Twist and lock case for easy access to keys.
• Size identification to easily identify the key.
• Lanyard hole for easy attachment to the Milwaukee lanyard range allowing use at height.

• Turn PACKOUT™ into stationary shop storage.
• Multiple mounting configurations.
• Organise your shop together with PACKOUT™ boxes and wall accessories.
• Metal reinforced mounting points for carrying high weights.
• Constructed with impact resistant polymers for highest durability.
• Connects to all MILWAUKEE® PACKOUT™ modular storage.

• One litre capacity with 0
• Ideal for gear boxes, differentials, lawn mowers, chain saws, outboard motors and suitable for oils, automatic transmission fluids, brake fluids and general purpose cleaners
• This handy mini pump makes all top up jobs easy

• Suitable for air & water
• BSP fitting
• ISO 5774:2008
• Temp Range -10C TO +60C
• Air hose
• Rubber alloy

• Pin hole to enable securing of socket.
• Knurling area for better finger grip.
• Stamped sizes for quick and easy identification.
• Dual-material rubber retainer prevents wear down and enables secure hold.

• Lanyard hole.
• 8? adjustable wrench (48227508) has an extra wide jaw of 38 mm for increased jaw capacity in confined environments.
• Permanent lasered inch and mm markings for accurate adjustment
• Parallel jaws won't slip or damage finish surfaces.
• Slim head design for reaching into tight spaces.
• Ergonomic rounded handle design for a comfortable fit in the hand and less pressure points on the palm.
• Chrome plating for best-in-class rust protection and increased durability.
• Precision adjustment screw with accurate threads and tight tolerances. The jaws won't back off during use.

• Constructed with a 8 Tpi design for fast starts and smooth cuts large gullets for easy chip ejection and a unique carbide blend the TORCH Blades with NITRUS CARBIDE are designed to last the longest and cut the fastest in cast iron / SML pipe and other thi
• This special carbide NITRUS blend is designed to cut 3x longer than existing standard carbide teeth blades.
• Best performance in all thick metals and especially cast iron soil waste and drainage pipes
• 25 mm blade height for improved stability and minimum vibration.
• The TORCH blades with NITRUS CARBIDE teeth is the next generation of carbide technology.
• Thick 1.27 mm robust blade body for precise straight cuts.

• One hand locking mechanism.
• Made from forged alloy steel for best durability – Cr Steel.
• Less hand fatigue when cutting thicker materials. Design with compound leverage action.
• Aviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.
• Ergonomic and durable overmoulded grips add comfort and last longer.
• Triple cutting direction identification – on the head, handle and by colour coded handle.
• Torsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.
• Thumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.
• Extra long aviation snips: For longer and straighter cuts in one go.
• Offset snips: For long continuous straight or curved cuts. 45° offset keeps users hand away from the cutting material.
• Chrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.
• Serrated cutting edges prevent slippage when cutting.
• Flush slimline design for non-snagging in material.

• Slim shank diameter for access to low lying screw applications.
• Permanent visible ID markings allows for quick tool identification.
• Landyard hole for easy attachment to a safety system.
• Anti role 3 sided collar on the handle
• VDE tested to 10 000 V and guaranteed to 1,000 V.
• Comfortable Tri-Lobe handle optimized for maximum user comfort and high torque applications.

• Slim profile head with flush direction lever offers better accessibility.
• 90 tooth design with 4 °of arc swing for tight work spaces.

• Steel reinforced handle for higher durability.
• Precision balanced design and over molded handle for more control and better grip.
• High-performance cover preventing damage to surfaces.
• Steel shot-filled head for increased rebound reduction and maximised impact.

• 48 teeth teardrop head design allows for greater applied torque
• Reversible lever allows for quick change between forward and reverse

• Standard and extended handle lengths for easier access in tight spaces or extra leverage.
• Slim profile head with flush direction lever offers better accessibility.
• Versatile lockable flex head: Switch between 11 locking positions and freely moving head.
• 90 tooth design with 4 degreeof arc swing for tight work spaces.

• These heavy duty CV Boot Clamp Pliers can be used by hand or with the assistance of a power bar and torque wrench if specific torque is required
• PVC dipped handles for comfort
• Suitable for installation of certain clamps on fuel filters, water pumps and other cooling systems

• Rounded I-Beam handle for comfortable handling grip.
• 180° pivoting head for greater access to tight spaces.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Chrome alloy steel, chrome plated.
• Durable double stacked pawls for longer ratchet life.
• 144 ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.
• Ink-filled labels for better visibility.

• Suitable for air & water
• Temp -10C to + 60C
• 21 BAR
• Comes with Yellow Stripe
• 15m coil
• 10.0mm (3/8in.)

• Fits most UK & European Vehicles
• Programmable Sensor
• 433mhz sensor

• Chrome alloy steel, chrome plated.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Durable double stacked pawls for longer ratchet life.
• 144 Ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.

• High quality hot-forging process provides a performance exceeding ASME standard
• Popular range of metric sizes fits most circumstances
• High visibility color filled size mark for easy identification during use
• Premium Chrome Finish
• 15 degree offset box end
• Anti-Slip and radius corners on open end

• ASME Compliant

General Information

Spanner Extension Wrench Spanner Extension Wrench.

• Gloves and goggles should be used in high powered situations
• Manufactured from Chrome Vanadium with high Chromed finish
• Universal use
• Length 385mm
• Extends the length of spanners when you need more leverage

General Information

Brake Drum Wear Gauge. Brake Drum Wear Gauge

• Metric and Imperial scale
• Measures drum wear
• Selected steel
• Size range 160mm - 400mm fits a larger range than most similar products on the market
• Brake drum wear gauge

• Manufactured from S2 steel for strength
• VDE 1000V tested and certificated
• Sizes: T10, T15, T20, T25, T27, T30, T40, T45, T50
• Ideal for use on electric and hybrid vehicles
• Packed in a plastic storage

• SHOCKWAVE™ IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Dual hole design and groove for security accessories.
• Ball detent design for superior impact socket retention.

General Information

Thread Repair Kit M10x1.5 Thread Repair Kit M10x1.5.

• Spare insert packs available
• For repairing and restoring damaged threads
• Kit includes insertion tool, HSS drill, HSS tap and three threaded inserts

• M10 x 1.5

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Double Locking Pin for Safety
• 10 Position Ratchet Bar
• Stop Tab for Security
• T-Type Welding for Added Durability
• Sold in Pairs
• Ratchet Type

• UKCA /CE

• One hand locking mechanism.
• Made from forged alloy steel for best durability – Cr Steel.
• Less hand fatigue when cutting thicker materials. Design with compound leverage action.
• Aviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.
• Ergonomic and durable overmoulded grips add comfort and last longer.
• Triple cutting direction identification – on the head, handle and by colour coded handle.
• Torsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.
• Thumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.
• Extra long aviation snips: For longer and straighter cuts in one go.
• Offset snips: For long continuous straight or curved cuts. 45° offset keeps users hand away from the cutting material.
• Chrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.
• Serrated cutting edges prevent slippage when cutting.
• Flush slimline design for non-snagging in material.