Workshop Tools

• Handles diameters up to 125mm
• Aluminium handle
• Filter wrench

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Essential for routine service on modern vehicles
• The paper filter can then be replaced successfully
• Plus Renault Megane, Laguna 15, 19, 22, 25 DCi engines and Mercedes-Benz
• For Citroën and Peugeot vehicles including Citroën Visa Dti, AX, Saxo, ZX Xantia and Peugeot 205, 306, 309, 405, 406, 806 models
• Removes the outer casing of eco-oil filters without damage

General Information

Telescopic Stainless Steel Mirror 6.3 X 4.5cm Telescopic Stainless Steel Mirror 6.3 X 4.5cm.

• Angled for increased applications
• Soft Grip handle
• Extends from 228mm to 717mm
• Unbreakable mirror

• Measures 63mm x 45mm

• High quality hot-forging process provides a performance
• Longer beam provides more torque during use
• Patented anti-slip open end grasps nut tight , Zero chamfer box end offer better bite on worn fasterners
• High visibility colour filled size mark for easy identification during use
• Premium Chrome Finish
• Anti-Slip and radius corners on open end
• Zero chamfer box end

• ASME Compliant

• Designed for use on Ford and Vauxhall cylinder head bolts
• 1/2in.D
• Socket manufactured from Chrome Vanadium, Bit from Silicon Steel
• A tamperproof bit in a special 140mm length

• Impact quality
• Correctly hardened
• Manufactured from Chrome Molybdenum
• This M18 Spline Bit is essential for use on rear hubs on Volkswagen Golf/Jetta and other Mk IV chassis models

• Long panel wrenches provide additional reach and leverage on stubborn fasteners and feature an aggressive non-slip design.
• Each wrench is constructed from chrome vanadium high alloy steel and is produced using a precision hot forging process with extra emphasis on special heat treatment to provide maximum strength and durability.
• Wrenches are technician's first choice for getting the job done and come backed by unwavering commitment to detail and uncompromising quality from top to bottom of each product. Long panel wrenches feature an aggressive non-slip design.
• Mirror polish chrome-plated finish resists rust while 12-point, 15 Degree offset box ends provide precise fastener control. Non-slip jaw designs allows for higher torque and turning power in tough applications. Includes storage rack.

• Carlyle Metric 12 Point Long Non-Slip Combination Wrench - 20 mm

• Extends up to 120mm
• Can also be used with 21mm spanner
• Strap filter wrench can be used in awkward areas with the help of any 1/2in. drive ratchet, power bar or extension bar

General Information

Ball Joint Separator - Fork Type. Ball Joint Separator - Fork Type

• Secure jaws, short shaft
• Long version available
• Manufactured to Ansi/DIN standards
• Fork type ball joint separator

• 180 position mechanism provides 2 degree swing arc for tight access areas
• 1.5 times ASME standard torque provides strength for the professional user
• Patented anti-slip open end provides secure grip on new and worn fasteners
• 180 Positon Ratcheting Mechanism
• Anti-Slip and radius corners on open end
• Mirror Polish Finish

• ASME Compliant

• Chrome finish for corrosion and rust protection.
• Laser engraved size ID for quick and easy identification.
• Precision knurling located on the shaft and female drive end for better control when hand threading.

• Qty: 25
• 90 Degree Angle Profile
• Imperial Threads
• 1/8in. BSP Gas

• Features a non-slip ratchet end and non-slip open end
• Corrosion Resistant
• Polished Chrome
• 90 Tooth Count
• 6 Point

• The 90 tooth count gear allows 4 degree arc swing

• Ergonomic Handle for Added Leverage and Comfort
• Heat-Treated for Strength and Durability
• Chrome Molybdenum Steel
• 90-Degree Tip Angle

• Precision designed tamper proof star tips ensure accurate fastener fit
• Includes color coded rail for convenient storage and identification
• T7H, T8H, T10H, T15H, T20H, T25H, T27H, T30H, T40H, T45H, T50H, T55H & T60H
• Mirror polished Chrome plated finish

• Dual hole design and groove for security accessories.
• Ball detent design for superior impact socket retention.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT™ sides.
• FOUR FLAT™ sides on socket deter rolling.

• Features a non-slip ratchet end and non-slip open end
• Corrosion Resistant
• Polished Chrome
• 90 Tooth Count
• 6 Point

• The 90 tooth count gear allows 4 degree arc swing

General Information

Nut Rivet Set - 40pc Nut Rivet Set - 40pc.

• Material: aluminium
• 40 Piece nut rivet set in four popular sizes
• Contents 10 x M3/M4/M5/M6 nut rivets
• Consumable
• For use with Nut Riveters: 0979/3597/3736/3713/2478 and others

• High quality hot-forging process provides a performance
• Premium chrome finish to protect against corrosion
• High visibility colour filled size mark for easy identification during use
• Premium Chrome Finish
• 15 degree offset box end
• Anti-Slip and radius corners on open end

• ASME Compliant

• Cutting edges for soft 4 mm and medium 3 mm
• Red and Yellow color symbolize the international color for safety
• Insulated, dual layered TPR handles
• Hardened, CR-MO jaws for added strength and durability

• NCCJ30SR-SP - Safety Pin Replacement
• NCCJ30SR-C - Column Replacement

General Information

Magnetic & Flexible Claw Pick-up Tool - 2pc Magnetic & Flexible Claw Pick-up Tool - 2pc.

• 2 pieces
• 600mm long (Magnet 27 x 24 x 12mm)
• Two ideal ways for retrieving components in deep engine bays and confined spaces
• Magnetic and flexi claw

• Qty: 50
• Straight Profile
• Metric Thread

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Magnetic long Star Key set
• Color coded Hex Key holder for convenient storage & Identification
• Short Star Arm for tight fit access

General Information

Thread Insert M10x1.5 - Pack 12. Thread Insert M10x1.5 - Pack 12

• Ideal for inserting into areas that will experience repeat thread wear
• For use with Laser thread insert kits
• Pack of 12

• 15° offset box for better accessibility.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.

• Part of PACKOUT™ Shop Storage.
• Fully customise your shop according to your needs.
• Most secure and easy mounting with click & lock mechanism.
• Easy and fast access to all tools.
• Hook coating protects hooks and stored items.
• High strength steel hooks for storing even heavy tools and items.