Proud to be a UK-based company
Contact usWorkshop Tools
Categories
Brand:
Select Brand
invoice Page 36 of 45
Results 1051 - 1080 of 1327
Part number: CUDPKS
Important compatibility info
Additional Information
Universal Drain Plug Key Set
- Supplied in storage case.
- Suitable for drain plugs on engine, gearbox and back axle
- Double end carbon steel keys with satin chrome finish.
ONLY
£22.51
£22.51
Part number: CUNIV12
Important compatibility info
| Title | 1/2in Drive Chrome Universal Joint |
Additional Information
1/2in Drive Chrome Universal Joint
- Radius corner on working end provides higher torque and better gripping of fastener
- Chamfered drive opening allows a quicker connection between socket and fastener
- Mirror polish chrome-plated finish prevents rust
- 0
ONLY
£9.59
£9.59
Part number: CUNIV14
Important compatibility info
Additional Information
1/4dr universal joint
- Radius corner on working end provides higher torque and better gripping of fastener
- Chamfered drive opening allows a quicker connection between socket and fastener
- Mirror polish chrome-plated finish prevents rust
- 0
- Chamfered Drive Opening
- Radius Corner Design
- Chamfered Drive Opening
- Chrome Vanadium Alloy Steel
ONLY
£8.76
£8.76
Part number: CUNIV38
Important compatibility info
| Title | 3/8 Drive universal joint |
Additional Information
3/8 Drive universal joint
- Radius corner on working end provides higher torque and better gripping of fastener
- Chamfered drive opening allows a quicker connection between socket and fastener
- Mirror polish chrome-plated finish prevents rust
- Chrome Vanadium Alloy Steel
ONLY
£8.93
£8.93
Part number: CVFPT
Important compatibility info
Additional Information
Vacuum and Fuel Pump Pressure Tester
- Large 80mm diameter colour coded easy read gauge with protective rubber bumper and hanging hook
- Checks for leaks in fuel line / vacuum chokes and heating
- Test both mechanical and electrical fuel pumps.
- Brass fittings for compatibility with most vehicles
- Rubber hose and 14mm / 7mm manifold adapter
- Test Pressure up to 10psi
ONLY
£31.42
£31.42
Part number: CVLS2
Important compatibility info
Additional Information
2PC Valve Lapper
- 5/8inch, 13/16inch, 11/18inch, and 13/8inch (1.6cm, 2.1cm, 2.9cm, 3.5cm) valves; 8.9inch and 8.3inch (22.6cm and 21.1cm)
- Suitable for any clean, flat surface of small or large engine car or other vehicle
ONLY
£11.76
£11.76
Part number: CVSC
Important compatibility info
Additional Information
Valve Spring Compressor
- Twin camaction permits use from above or below valve.
- Reversible jaw and adaptor.
- Universal jaw with 55 TO 175mm capacity and 165mm throat depth.
- Suitable also for general use on OHC, OHV and CVH engines.
- Suitable for use on multivalve petrol and diesel engines with deepseated valves.
ONLY
£41.81
£41.81
Part number: CVTBBK21
Important compatibility info
Additional Information
Professional vacuum/pressure diagnostic tool helps identify a variety of faults on vehicle systems including fuel ignition transmission emission and air conditioning/heating. Kit also includes reservoirs hoses and adaptors for bleeding brake and clutch systems. Features lightweight aluminium body with simple twist function for choice of pressure or vacuum testing. Large rubber easytoread gauge.
- Positive pressure: 0 ~ 60 PSI Negative pressure. 0~ 30 PSI
- Large easy to read gauge
- light weight aluminium body with simple twist function for choice of pressure or vacuum testing.
ONLY
£57.23
£57.23
Part number: CWSCCP
Important compatibility info
Additional Information
- High quality forged steel for increased hardness, longer wear, and improved corrosion resistance
- Serrated jaws for gripping, bending, and pulling wire in restricted areas
- Crimp or strip common wire sizes from 12-20 gauge
- Two cutters provide access and leverage options
- Serrated gripping nose
- High quality forged steel
- Strips 12-20 gauge wire
ONLY
£23.12
£23.12
Part number: CWSCCPSA
Important compatibility info
Additional Information
203mm Automatic wire stripper
- wire crimper for 22-10 insulated 22-14 insulated 7-8 insulated
- wire cutter in handle
- crimping ability on non-insulated wires
- micro adjuement
ONLY
£15.47
£15.47
Part number: FNW1314M
Important compatibility info
| Title | Spanner - Flare Nut Metric - 13 mm x 14 mm |
Additional Information
Mirror polish chrome plated finish resists rust while 15 degree offset heads on both ends make it easier to work near firewalls, engines, wheels, and other restricted areas.
- Open end 6-point design provides precise fastener control.
- Flare nut wrenches are specifically designed to reduce wear and damage on line and hose fittings.
- Mirror polished Chrome plated finish
ONLY
£6.04
£6.04
Part number: FNW1517M
Important compatibility info
| Title | Carlyle Metric Flare Nut Wrench - 15 mm x 17 mm |
Additional Information
Carlyle Metric Flare Nut Wrench - 15 mm x 17 mm
- Open end 6-point design provides precise fastener control.
- Flare nut wrenches are specifically designed to reduce wear and damage on line and hose fittings.
- Mirror polished Chrome plated finish
- Carlyle Metric Flare Nut Wrench - 15 mm x 17 mm
ONLY
£13.01
£13.01
Part number: FNW1618M
Important compatibility info
| Title | Carlyle Metric Flare Nut Wrench - 16 mm x 18 mm |
Additional Information
Carlyle Metric Flare Nut Wrench - 16 mm x 18 mm
- Open end 6-point design provides precise fastener control.
- Flare nut wrenches are specifically designed to reduce wear and damage on line and hose fittings.
- Mirror polished Chrome plated finish
- Carlyle Metric Flare Nut Wrench - 16 mm x 18 mm
ONLY
£10.79
£10.79
Part number: RW011M
Important compatibility info
| Title | Spanner - Flat - Metric - 11 mm |
Additional Information
This design provides an incredibly precise turning radius for work in tight spaces
- Features a non-slip ratchet end and non-slip open end
- Corrosion Resistant
- Polished ChromeCorrosion Resistant
- 90 Tooth Count
- 6 Point
- The 90 tooth count gear allows 4 degree arc swing
ONLY
£9.41
£9.41
Part number: RW012M
Important compatibility info
| Title | Spanner - Flat - Metric - 12 mm |
Additional Information
This design provides an incredibly precise turning radius for work in tight spaces
- Features a non-slip ratchet end and non-slip open end
- Corrosion Resistant
- Polished ChromeCorrosion Resistant
- 90 Tooth Count
- 6 Point
- The 90 tooth count gear allows 4 degree arc swing
ONLY
£12.11
£12.11
Part number: RW014M
Important compatibility info
| Title | Spanner - Flat - Metric - 14 mm |
Additional Information
This design provides an incredibly precise turning radius for work in tight spaces
- Features a non-slip ratchet end and non-slip open end
- Corrosion Resistant
- Polished ChromeCorrosion Resistant
- 90 Tooth Count
- 6 Point
- The 90 tooth count gear allows 4 degree arc swing
ONLY
£12.84
£12.84
Part number: RW015M
Important compatibility info
| Title | Spanner - Flat - Metric - 15 mm |
Additional Information
This design provides an incredibly precise turning radius for work in tight spaces
- Features a non-slip ratchet end and non-slip open end
- Corrosion Resistant
- Polished ChromeCorrosion Resistant
- 90 Tooth Count
- 6 Point
- The 90 tooth count gear allows 4 degree arc swing
ONLY
£12.84
£12.84
Part number: RW016M
Important compatibility info
| Title | Spanner - Flat - Metric - 16 mm |
Additional Information
This design provides an incredibly precise turning radius for work in tight spaces
- Features a non-slip ratchet end and non-slip open end
- Corrosion Resistant
- Polished ChromeCorrosion Resistant
- 90 Tooth Count
- 6 Point
- The 90 tooth count gear allows 4 degree arc swing
ONLY
£14.49
£14.49
Part number: RW018M
Important compatibility info
| Title | Spanner - Flat - Metric - 18 mm |
Additional Information
This design provides an incredibly precise turning radius for work in tight spaces
- Features a non-slip ratchet end and non-slip open end
- Corrosion Resistant
- Polished ChromeCorrosion Resistant
- 90 Tooth Count
- 6 Point
- The 90 tooth count gear allows 4 degree arc swing
ONLY
£16.13
£16.13
Part number: RW019M
Important compatibility info
| Title | Spanner - Flat - Metric - 19 mm |
Additional Information
This design provides an incredibly precise turning radius for work in tight spaces
- Features a non-slip ratchet end and non-slip open end
- Corrosion Resistant
- Polished ChromeCorrosion Resistant
- 90 Tooth Count
- 6 Point
- The 90 tooth count gear allows 4 degree arc swing
ONLY
£15.71
£15.71
Part number: RW008M
Important compatibility info
| Title | Spanner - Flat - Metric - 8 mm |
Additional Information
This design provides an incredibly precise turning radius for work in tight spaces
- Features a non-slip ratchet end and non-slip open end
- Corrosion Resistant
- Polished ChromeCorrosion Resistant
- 90 Tooth Count
- 6 Point
- The 90 tooth count gear allows 4 degree arc swing
ONLY
£11.26
£11.26
Part number: RW009M
Important compatibility info
| Title | Spanner - Flat - Metric - 9 mm |
Additional Information
This design provides an incredibly precise turning radius for work in tight spaces
- Features a non-slip ratchet end and non-slip open end
- Corrosion Resistant
- Polished ChromeCorrosion Resistant
- 90 Tooth Count
- 6 Point
- The 90 tooth count gear allows 4 degree arc swing
ONLY
£9.10
£9.10
Part number: NCCJ30LPF-FP
Important compatibility info
| Title | Foot Pedal - For NCCJ30LPF |
Additional Information
- NCCJ30LPF-RW - Rear Wheel Replacement
- NCCJ30LPF-RP - Rubber Pad Replacement
- NCCJ30LPF-P - Hydraulic Pump Replacement
- NCCJ30LPF-H - Handle Replacement
- NCCJ30LPF-FW - Front Wheel Replacment
- NCCJ30LPF-FP - Foot Pedal Replacement
ONLY
£7.24
£7.24
Part number: NCCJ500-FP
Important compatibility info
| Title | Foot Pedal - For NCCJ500 |
Additional Information
- NCCJ500-W - Wheel Replacement
- NCCJ500-S - Saddle Replacement
- NCCJ500-P - Hydraulic Pump Replacement
- NCCJ500-FP - Foot Pedal Replacement
ONLY
£6.96
£6.96
Part number: NCCJ30LPF-FW
Important compatibility info
| Title | Front Wheel - For NCCJ30LPF |
Additional Information
- NCCJ30LPF-RW - Rear Wheel Replacement
- NCCJ30LPF-RP - Rubber Pad Replacement
- NCCJ30LPF-P - Hydraulic Pump Replacement
- NCCJ30LPF-H - Handle Replacement
- NCCJ30LPF-FW - Front Wheel Replacment
- NCCJ30LPF-FP - Foot Pedal Replacement
ONLY
£9.57
£9.57
Part number: HSFT2HD
Important compatibility info
| Title | Hammer Tip - Plastic |
Additional Information
Replaceable Hard Plastic Tip For Variety Of Non-Marring Applications
- Dia 32.5 in. x 25 mm
- Ideal for any application that requires a non-marring striking face
- Hard plastic tip
ONLY
£5.93
£5.93
Part number: SDH15M
Important compatibility info
| Title | Hex Driver - 1.5mm |
Additional Information
- Comfort grip handles and bolster hole in the handle for increased torque
- Satin chrome plated finish for increased durability
ONLY
£5.44
£5.44
Part number: SDH25M
Important compatibility info
| Title | Hex Driver - 2.5mm |
Additional Information
- Comfort grip handles and bolster hole in the handle for increased torque
- Satin chrome plated finish for increased durability
ONLY
£5.51
£5.51
Part number: SDH2M
Important compatibility info
| Title | Hex Driver - 2mm |
Additional Information
- Comfort grip handles and bolster hole in the handle for increased torque
- Satin chrome plated finish for increased durability
ONLY
£5.54
£5.54
Part number: SDH4M
Important compatibility info
| Title | Hex Driver - 4mm |
Additional Information
Constructed from SVCM special alloy material for durability and longer life
- Comfort grip handles and bolster hole in the handle for increased torque
- Satin chrome plated finish for increased durability
ONLY
£5.92
£5.92
Page 36 of 45
Workshop Tools
