Workshop Tools

The Maypole Double Barrel Foot Pump is just one of the options from their range of portable foot pumps. It has superior performance up to 100psi, comes with an analogue readout which measures in both PSI and BAR and all the connectors and adapters that you will need to inflate not only your tyres but also a wide range of other inflatables including sports equipment, balls and toys. The pump is quick and easy to use, is compact for easy storage and comes with an ergonomic rubberised tread plate.

Maypole are the UK's leading manufacturer of high quality towing, trailer and related leisure products. Based in Birmingham with over 40 years of experience, they are a trusted and well-known brand for their products. With over 2000 lines currently, Maypole is using their knowledge and expertise in making new and innovative products and solutions which are helping their customers. From electrical cabling, to electrical winches, and even ice scrappers, Maypole has tried to cater for the Travel and leisure markets in the UK.

• 60cm Hose with adapters
• Superior performance to 100psi
• Ergonomic rubber coated tread plate
• Due to its size, the foot pump is easy to store and very easy to use
• Ideal for the quick and easy inflation of a variety of products including car tyres, bicycle tyres, motorcycle tyres, sports balls, air beds, etc.
• Double barrel, heavy duty footpump

• 90 Tooth Ratchet Design allows access to confirmed spaced with a 4 degree arc swing
• Flip lever mechanism provides quick and easy forward or reverse operation.
• Full polish finish prevents corrosion and rust.
• 4 Degree Arc Swing
• Designed with professional techincians input and application in mind
• Full polish finish

• Exceeds ASME standards by 1.5 times

• Foldable
• Black and Silver finish
• Side wire cutter for wire twisting applications

• Creates a stronger internal thread in soft metals.
• Helps to protect tapped threads against wear and damage.
• Supplied in Storage case.

To solve this problem Maypole now supply a range of replacement gas cylinders suitable for use with most models of mini Mig welder; for welding with aluminium, mild or stainless steel. This Carbon Dioxide (CO2) cylinder from Maypole is suitable for welding with mild steel only. The gas comes in an easy to fit, disposable, pressurised canister, which should be disposed of with other ferrous metals. The gas cylinder also comes with full fitting and usage instructions.

Established in 1969, Birmingham based company Maypole has a long heritage in the manufacture and supply to customers in the automotive, trailer, leisure and agricultural markets. For over 40 years Maypole have been manufacturing and supplying its products to its ever growing network of customers and are proud to continue to add to their ever increasing portfolio of products.

• Mig Welder Co2 Cylinder.
• Pressurised, disposable gas cylinder
• For welding mild steel
• Welding duration approx 1 hour

• Gas cartridge sold separately
• Requires filling prior to use with 3185 Go System butane aerosol gas
• Safety checked and test burned
• Applications include electrical, jewellery, automotive, household repair, lock thawing and many more
• Ideal for intricate soldering with a finely adjustable needle flame
• Patented childproof design
• Instantly FLARESAFE, simple and safe to use at any angle
• Compact butane refillable gas torch (up to 1350 C) with push button auto ignition

• Conforms to BS:EN521

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening
• Chrome Molybdenum Alloy Steel
• Phosphate Outer Finish

• This tool is specifically designed to tackle rust buildup on car hub shafts and brake discs, ensurings a thorough cleaning process that restores your vehicle's.

• Range of hose sizes, working lengths and a choice of colour
• Hose recoils to a fraction of it's working length
• 200 m straight ends with spring guard
• Nickel plated 360° swivel fittings
• Polyurethane (PU) material

• Maximum Working Pressure: 200 psi / 14 bar Hose Length: 5 m Hose Inside Diameter: 6.5 mm Hose Outside Diameter: 10 mm Hose Fittings: R 1/4 swivel ends Hose Colour: Blue

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Radius corner on working end provides higher torque and better gripping of fastener
• Chamfered drive opening allows a quicker connection between socket and fastener
• Mirror polish chrome-plated finish prevents rust
• Knurled teeth on bottom of socket improve grip when handling
• Chrome Vanadium Alloy Steel

• DHA, DHB, DHC, DHD, DHE, DHF, DHG, F8JA, F8JB, FUJA, FUJB, M7JA, M7JB, SNJA, SNJB, SNJC, SNJD, STJA, STJB, STJC, STJD, F8JA, F8JB, FUJA, FUJB, ASDA, ASDB, FXDA/C, FXDB/D, FXJA, FXJB, FXJC, RTJA, RTJB, RTJC, RTJD, RTJE, SPJA, SPJC, PSJD, SPJE, UTJA, FXJA, JXJB, FYDA, FYDB, FYDC, FYDD, FYDH, FYJA, FYJB, FYJC, HWDA, HWDB, L1T, L1V, L1W, SHDA, SHDB, SHDC, B4164S3, FYJA, MHA, MHB, EYDB, EYDC, EYDD, EYDE, EYDF, EYDG, EYDI, EYDJ, EYDL, EYPA, EYPC, B4184S11, B4184S8, L8, MZR 1.8(L8), CDBB, CGBA, CGBB, CHBA, CHBB, CSDA, CSDB, Q7DA, QQDA, QQDB, QQDC, CJBA, ALDA, EDBA, EDBB, EDBC, EDBD, EDDB, EDDC, EDDD, EDDF, HMDA, B4204S3, B4204S4, LF, MZR 2.0 (LF), YF, AOBA, AOBC, AODA, AODB, AODE, AOWA, AOWB, CJBA/B, N4JA, N4JB, SYDA, TBBA, TBBB, TBWA, TBWB, L3, GZFA, GZFB, GZFC, SEBA, SEWA, L5
• Equivalent to OE Reference: 21-162B, 21-163, 21-210, 21-259, 303-1054, 303-376/B, 303-507, 303-620, 49 JE01 054, 49 JE01 061, 49 JE02 061, 999-7151, 999-7152, 999-7201
• Ford, Mazda, Volvo
• Ford: B-MAX, C-MAX ('07), Cougar, Fiesta ('03/'08), Fiesta ('13), Fiesta ('96), Fiesta ('02), Focus ('04/'08), Focus ('98), Focus C-MAX, Fusion, Galaxy ('06), Mondeo ('07), Mondeo ('00), Puma, S-MAX, Tourneo Connect ('02), Transit ('06), Transit Connect ('02), Mazda: 2 (DY)(02-07), 3 (BK)(03-09), 3 (BL)(09-14), 5 (CR), 5 (CW), 6 (GG/GY)(02-07), 6 (GH)(07-113), CX-7 (ER)(07-13), MPV (LW)(99-05), MX-5 (NC)(05-15), Tribute (EP)(01-06), Volvo: C30, S40 (03-12), S80 (06-), V50, V70 (07-)

• C4404C Contains the tools required for Setting and Locking the 1.25 - 2.0 Twin Cam 16v. DURATEC Petrol engines (Belt and Chain)

General Information

Ball Joint Separator - Cup Type Ball Joint Separator - Cup Type.

• Manufactured from Carbon Steel
• Jaws : 22mm width, 20mm depth, maximum opening 50mm
• Thrust nut for leverage

• Yellow/yellow: approximately 2% of water content in brake fluid
• Yellow: less than 1% of water content in brake fluid
• Green: battery ok, i.e.: no water contained in the brake fluid

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Drop forged CR-V steel jaws and leaded screws (270mm) both heat treated ensure you obtain professional job performance.
• The tool is designed for use in limited space under wheel arch.
• Jaw design is fitting to warp coil claws for safely.
• Maximum jaw 270mm

• Creates a stronger internal thread in soft metals.
• Helps to protect tapped threads against wear and damage.
• Supplied in Storage case.

• As part of the timing chain replacement/valve timing adjustment, the timing chain must be pre-loaded to a specific torque setting before tightening the Vanos centre bolts. Remove the timing chain tensioner and install C4803 Timing Chain Tensioner Pre-load Tool in its place.
• BMW: 1 Series - E81/E82/E87/E88, 118i, 120i, 128i, 130i, 135i; 3 Series - E46/E90/E91/E92/E93, 316i, 318i, 316Ti, 318Ti, 323i, 325i/xi, 330i/xi, 335i/xi; 5 Series - E60/E61, 523i/Li, 525i/Li/xi, 530i/Li/xi, 535i/xi; 6 Series - E63/E64, 730i/Li; X3- E83, 2.5 & 3.0; X5-E70, 3.0; Z4 - E85/E86, 2.5 & 3.0; Mini: N12 (1.4/1.6), N14 (1.6); Citroen/Peugeot: C4, C4 Picasso, 207, 308, 3008, 5008, RCZ, Partner Teepee - EP3, EP3C, EP6, EP6C, EP6DT, DTS, CDT
• Citroën, Peugeot, BMW, Mini

• As part of the timing chain replacement/valve timing adjustment, the timing chain must be pre-loaded to a specific torque setting before tightening the Vanos centre bolts. Remove the timing chain tensioner and install C4803 Timing Chain Tensioner Pre-load Tool in its place.

• Air flow rate - 12L/min
• Max wattage - 100W
• Max amperage - 8A
• 12V DC power supply - plugs directly into cigarette lighter socket 
• Handy accessory holder - air bed adaptor, ball adaptor and tyre valve adaptor
• Compact hose and power cord storage - air hose -50cm, power cord - 3m
• Max pressure range - 0-150PSI
• Quick release connector valve 
• Multiple adaptors included 
• Portable and compact
• Super bright LED night light
• Large precision analogue display (PSI/Bar)
• High speed inflation - 3.5 mins (0-36PSI/175/65/R14)

• Radius corner on working end provides higher torque and better gripping of fastener
• Chamfered drive opening allows a quicker connection between socket and fastener
• Mirror polish chrome-plated finish prevents rust
• S2 Steel Bit provides longer life and performance
• Knurled teeth on bottom of socket improve grip when handling
• Chamfered Drive Opening
• Chrome Vanadium Alloy Steel

• Mirror Polish Chrome-Plated

• Radius corner on working end provides higher torque and better gripping of fastener
• Chamfered drive opening allows a quicker connection between socket and fastener
• Mirror polish chrome-plated finish prevents rust
• S2 Steel Bit provides longer life and performance
• Knurled teeth on bottom of socket improve grip when handling
• Chamfered Drive Opening
• Chrome Vanadium Alloy Steel

• Mirror Polish Chrome-Plated

• Radius corner on working end provides higher torque and better gripping of fastener
• Chamfered drive opening allows a quicker connection between socket and fastener
• Mirror polish chrome-plated finish prevents rust
• S2 Steel Bit provides longer life and performance
• Knurled teeth on bottom of socket improve grip when handling
• Chamfered Drive Opening
• Chrome Vanadium Alloy Steel

• Mirror Polish Chrome-Plated

• provides better maneuverability, allows users to position the wrench more comfortably and apply torque with greater ease
• Allows for greater access in tight areas
• Helps protect the wrench from rust and corrosion, ensuring longevity
• Clear and easy to read engraving to ensure use of proper size
• Eases transportation and provides storage solution
• 30 and 60 degree head angles
• Polished Chrome Finish
• Double One Size Openings
• Size etched on side

• Polished Chrome Finish

• High quality hot-forging process provides a performance exceeding ASME standard
• Ultra thick 6 points open end provides durable performance
• High visibility colour filled size mark for easy identification during use
• ASME Compliant
• Premium Chrome Finish
• 15 degree offset dual open end

• ASME Compliant

• Radius corner on working end provides higher torque and better gripping of fastener
• Chamfered drive opening allows a quicker connection between socket and fastener
• Mirror polish chrome-plated finish prevents rust
• Knurled teeth on bottom of socket improve grip when handling
• Chrome Vanadium Alloy Steel

• Pin Diameter: 16mm
• Also provides the clearance between head and workbench required when reaming valve guides.
• A pair of support stands which locate into cylinder head via stud holes.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Self calibrating
• Auto power off
• Measures tyre tread depth in mm / inch
• Measures pressure in psi / bar / kPa / kgf/cm²

• Tyre Pressure Accuracy: +/- 1.5 % Reading Resolution: 0.1 psi / 0.01 bar / 1 kPa / 0.01 kg/cm² Calibration: 2-100 psi / 0.15-7 bar / 15-700 kPa Tyre Tread Depth Accuracy: +/- 0.2 mm Reading Resolution: 0.01 mm / 0.001 in Calibration: 0-15 mm