Workshop Tools

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Chrome alloy steel, chrome plated.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Durable double stacked pawls for longer ratchet life.
• 144 Ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.

• Low rattle, precision jaws provide secure grip
• Laser etched marking show fastener sizes
• 60% thicker handles for comfort
• 25% wider jaws for working on larger fasteners
• Corrosion resistant
• Precision Jaws
• Laser Etch Scales
• Thick Handle

• CR-V Material

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Torx sizes from T9 to T40
• Metal housing for increased durability.
• Ergonomic handle provides comfortable and secure grip.
• High contrast size callouts for quick and easy identification.
• Foldable keys enable easy access & storage solution.

• Integrated wire cutter that can cut up to 1/4in. bolt
• Nickel-plated finish for corrosion resistance
• Durable forged CR-V jaws with induction hardened teeth for ulitimate durability
• Complies with ASME specs B107.24
• Pull-up release allows for one-handed opening when locked
• Tested to exceed 900 lbs. jaw pressure
• Hard rubber grip on handle helps prevent hand slippage

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• CR-V alloy steel for long lasting durability.
• Worldwide patent.
• Meet DIN torque spec.
• Processing without tolerance to true present the 90 teeth 4 degrees of operation function.
• Nickel chrome plated for long lasting protection.
• Extra long beam offers extreme reach and loads of leverage.
• 6-point box ends snugly fix hex-shaped fastener heads and resist slipping off while you work

General Information

Ratchet Screwdriver & 10 Bits

• Ratchet Screwdriver with forward, lock and reverse mechanism
• Bit Set in handle includes: PzDrive Pz1/Pz2/Pz3, Phillips Ph1, Ph2, Star T25/T30/T40 and Flat 5mm/7mm
• Stainless steel shaft with magnetic bit holder. Bits are manufactured from S2 Silicon Steel
• Soft ergonomic grip handle
• Knurled shaft

• 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19 mm
• Shallow Metric Socket Set
• 12 Points
• Socket set features mirror polish Chrome-Plated finish for rust resistance

• Lacquer finish for exceptional rust prevention.
• Hardened jaws for improved strength and durability.
• Comfort non slip grip provides the user good control when using.
• Slim head design allows for greater accessibility.
• Professional grade pliers constructed from chrome-moly material
• Comfort non slip handles
• Lifetime Warranty

• Lacquer finish for exceptional rust prevention.
• Hardened jaws for improved strength and durability.
• Jaw design provides exceptional gripping force.
• Professional grade pliers constructed from chrome-moly material
• Comfort grip handles
• Positive joint engagement.
• Lifetime Warranty
• Lifetime Warranty

• 15° offset box for better accessibility.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Chrome finish for corrosion and rust protection.
• Laser engraved size ID for quick and easy identification.
• Precision knurling located on the shaft and female drive end for better control when hand threading.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Custom engineered steel - Milwaukee custom metal formula makes the SHOCKWAVE bits more resistant to shock from impacting.
• SHOCK ZONE reduces stress at the tip resulting in less tip breakages. The combination of the SHOCK ZONE design and special heat treatment absorbs impacts and allows the bit to flex with spring like action.
• SHOCK ZONE Geometry - designed to flex:
• Laser hardened WEAR GUARD TIP for improved wear resistance and protection of the fit over the life of the bit.
• Designed for use with impact drivers the SHOCKWAVE IMPACT DUTY accessory line is not only ideal for heavy duty impact applications, but also delivers a full system solution for all the user's drilling and fastening needs.

• NCCJ500-W - Wheel Replacement
• NCCJ500-S - Saddle Replacement
• NCCJ500-P - Hydraulic Pump Replacement
• NCCJ500-FP - Foot Pedal Replacement

• It is not possible to locate onto the oil filter housing from above due to the inlet system restricting access.
• The spanner has been designed in order to avoid the inlet system and wiring loom next to the oil filter housing.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Rust protection: Chrome plated tool increases life by reducing corrosion.
• Lever release design: Traditional release lever for jobsite convenience.
• TORQUE LOCK™: Faster set up and easy release when clamping flat and round material. Extra force can be applied to the TORQUE LOCK™ screw for better and more secure grip. Can also be used for hanging / storage purposes.
• MAXBITE™ pliers have special jaw geometry for maximum grip.
• Hardened jaws: Better grip force on jobsite material.

• 15° offset box for better accessibility.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.

• Posts are clearly labeled for effortless identification
• Each post has an extended base for a more secure fit
• Dual rail system for deep and shallow sockets.

• Socket Holder
• 1/4 in Drive
• SAE
• Carlyle Tools

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Drop forged CR-V steel jaws and leaded screws (270mm) both heat treated ensure you obtain professional job performance.
• The tool is designed for use in limited space under wheel arch.
• Jaw design is fitting to warp coil claws for safely.
• Maximum jaw 270mm

General Information

Oil Filter Wrench Set 3/8"D 2pc

• Radius corner on working end provides higher torque and better gripping of fastener
• Chamfered drive opening allows a quicker connection between socket and fastener
• Mirror polish chrome-plated finish prevents rust
• Knurled teeth on bottom of socket improve grip when handling
• Radius Corner Design
• Chamfered Drive Opening

• Chrome Vanadium Alloy Steel

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

General Information

External Circlip Pliers - Bent 175mm

• Soft, smooth grip handles
• 175mm long, 15mm tip Opening dimensions: 30mm
• Hardened and tempered tips

• For expanding and fitting external circlips

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Tool free blade change for changing blades up to 10x faster.
• Compact design, ideal for versatile cutting in tight spaces.
• Adjustable blade length for easier flush cutting.
• Rubber overmold grip for increased comfort.
• Accepts 12″ blades.
• Supplied with 10″ / 24 Tpi blade.

• 180 degree rotating flexible heads allow you to apply leverage at any desired angle and get around obstructions in tight areas.
• Premium chrome vanadium steel provides durable life
• Heat treated for maximum strength
• 72 tooth ratchet
• Dual 180 degree swivel ratchet head design
• Mirror Polish Finish

• ASME Compliant

• Comes complete with a handy storage case
• Range 0-99 psi / 0-7 bar
• Measures in PSI, bar, kpa, Kg/Cm2
• Tread depth gauge to measure tyre tread depth
• Unique 360 degree rotating nozzle and LED light to assist in locating tyre valve

• Dimensions (MM): H 141 x W 40 x D 29
• Weight (kg): 0.094
• Batteries: 2x CR2032 Included

• Adjustable indexable head provides flexibility with incremental angles up to 18 degrees which allows the user to choose up to 11 different angles for prying in different confined spaces
• Features a precise and sharp blade edge which allows the user to easily break apart tight components
• The ergonomic design reduces user fatigue for safety and increased productivity
• Indexing Joint
• Sharp Tip
• Ergo Grip

• 180 position mechanism provides 2 degree swing arc for tight access areas
• 1.5 times ASME standard torque provides strength for the professional user
• Patented anti-slip open end provides secure grip on new and worn fasteners
• 180 Positon Ratcheting Mechanism
• Anti-Slip and radius corners on open end
• Mirror Polish Finish

• ASME Compliant

• Simple diagnostic tool for listening to engine, gearbox and alternators
• Complete with extended probe
• Plastic and rubber parts make this piece shock proof
• Provides a fast and easy way to detect problems
• Professional mechanic quality

General Information

Brake Cylinder Hone Brake Cylinder Hone.

• 22mm - 69mm
• For honing out brake cylinders
• For use with a standard drill
• Spare stones set is sold separately (Part 2244A)
• Packaged in a sliding blister

• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Dual hole design and groove for security accessories.
• Ball detent design for superior impact socket retention.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• 17 mm x 19 mm
• 16 mm x 18 mm
• 13 mm x 15 mm
• 12 mm x 14 mm
• 10 mm x 11 mm
• 45 Deg offset chamfered box ends provide improved hand clearance
• 12 Point
• Full Polish Chrome

• Off-Set long box end metric Spanner set

• 180 position mechanism provides 2 degree swing arc for tight access areas
• 1.5 times ASME standard torque provides strength for the professional user
• Patented anti-slip open end provides secure grip on new and worn fasteners
• 180 Positon Ratcheting Mechanism
• Anti-Slip and radius corners on open end
• Mirror Polish Finish

• ASME Compliant