Workshop Tools

• Supplied with a ball inflation needle, presta chuck, inflator nozzle and schrader chuck
• Flexible battery system: works with all MILWAUKEE M12 batteries
• REDLITHIUM battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life (Battery sold separately)
• Nozzle & hose storage, easily stores 66 cm hose and attachments, with an all-brass schrader chuck
• Illuminated LCD display with a digital pressure and fuel gauge that displays remaining charge
• Auto shut-off technology inflates to users pre-selected pressure for highly accurate inflation
• Anti-vibration stand with all rubber feet for no movement while inflating
• High efficiency motor & pump
• Compact lightweight design for fast inflation of car, light truck and compact equipment tires

• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• According to DIN 3129 / ISO 2725-2 internal square drive according to DIN 3121 / ISO 1174-2.
• Laser etched size markings for easy identification and won‘t wear off.
• Recessed corners allow torque to be transferred across the flats of the socket rather than producing stress on the points or corners.
• 6 gripping points for best precise fit.

Safety information

Safety First Read the operating and safety instruction. Follow them carefully. Maximum safe operating pressure 9 bar (125 psi). Air lines are dangerous - use them correctly Putting into service Before use check cap-retaining screws are secure.If the Air tool is dropped check for cracked components. Check air line pressure before connecting the Air tool.The Air tool should be used only by people trained in the use of pneumatically operated tools. Use Keep hands away from moving parts. Never operate the Air tool near the face or body. Only use Air tool to fit CV boots. If air line pressure exceeds 9 bar fit a regulator. Disconnect the Air tool from the air supply after use.

Installation Information

Operation: 1. Slide boot onto arms, large end first. The arms should just protrude from the small end of the boot. To fit a boot to an inner joint, turn the boot inside out before sliding i onto the Airtools´s arm. 2. Press " + " button until arms open enough to pass over the joint. Keep hands clear of moving parts. The air line can now be disconnected. The arms will remain open until the " - " button is pressed. 3. Place Airtool over CV joint and press release button (" -"). Keep hands away from moving parts. 4. Withdraw the Airtool, leaving the boot in position. Complete the installation in the normal way.

• Precision machined joint for maximum power transmission with optimum leverage for easy and effortless work.
• Induction hardened cutting edges to cut even the hardest of materials.
• Steel blades are fully forged, hardened and tempered for best durability. Grey titanium surface finish is non reflective and ensures maximum corrosion resistance.
• VDE (DIN EN/IEC 60900) certified tools. Tested to 10,000 volts and guaranteed to 1,000 volts. Tested against cold to -40°.
• Ergonomic grip with softgrip for comfortable handling and good grip.

• Flexible and adaptable
• 3 Replacable downligts
• Sturdy yet easy to build
• UKCA Certified downlights
• Enhance visual appeal & encourage impluse purchase
• Black sleek design

• UKCA certified downlights